References

1. 용접·접합 편람 대한용접학회
2. Metals Handbook(10th ed.) v.2 ASM
3. Superally Ⅱ C. T. Sims(et al.)
4. High-temperature structure materials M. McLean
5. Structure and properities of engineering alloys(2nd ed.) W. F. Smith
6. Welding metallurgy S. Kou
7. Introduction to the physical metallurgy of welding K. Easterling
8. Materials science and engineering A v.203 Influence of solidification on the microstructural evolution of mickel base weld metal J. S. Ogborn;M. J. Cieslak
9. J. Merals v.40 no.7 Microfissuring of alloy 718 in the weld heat affected zone R. G. Thompson
10. Acta mater. v.33 no.7 Precipitation around welds in the nick-base superalloy, Inconel 718 R. Vincent
11. Welding J. no.2 The welding and solidification metallurgy of alloy 625 M. J. Cieslak
12. Metall. Trans. A v.20A no.10 Inconel 718: A solidification diagram G. A. Knorovsky (et al.)
13. Metall. Trans. A v.21A no.2 A comparision of the solidification behavior of Incoloy 909 and Inconel 718 M. J. Cieslak (et al.)
14. Metall. Trans. A v.27A no.11 Solidification of an alloy 625 weld overlay J. N. DuPONT
15. Welding J. no.10 Solidification and Weldability of Nb-bearing superalloys J. N. DuPONT
16. Metall. Trans. A v.29A no.11 Solidification of Nb-beraing superalloys : Part Ⅰ. Reaction sequences J. N. DuPONT(et al.)
17. Metall. Trans. A v.29A no.11 Solidification of Nb-beraing superalloys : Part Ⅱ. Pseudoternary solidification surfaces J. N. DuPONT(et al.)
18. 대한용접학회지 v.15 no.4 Ni-Cr-Fe 및 Ni-Fe-Cr-Mo계 합금의 용접부 균열특성에 관한 연구-Part Ⅰ: 용접금속의 응고 균열 김희봉;이창희
19. 대한용접학회지 v.15 no.5 Ni-Cr-Fe 및 Ni-Fe-Cr-Mo계 합금의 용접부 균열특성에 관한 연구-Part Ⅱ: 열영향부의 액화균열 김희봉;이창희
20. 한국재료학회지 v.7 no.2 Incoloy 825 합금 및 탄서강의 이종강종간 용접특성 연구 김희봉;이창희
21. Sci. and Tech. of welding and joining v.4 no.1 Modelling mushy zones in welds of multicomponent alloys : implications for solidification craking J. N. DuPONT (et al.)
22. Acra mater. v.46 no.13 Modeling solute redistribution and microstructural development in fusion welds of Nb-bearing superalloys J. N. DuPONT (et al.)
23. Welding J. no.6 Alloy 625 surfacing of tool and die steels R. M. Nugent
24. Welding J. no.6 Alloy 625 surfacing of tool and die steels R. M. Nugent
25. Metall. Trans. v.1 no.2 Macrosegregation in ternary alloys R. Mehrabain;M.C. Flemings
26. Metall. Trans. A. v.12A no.6 Solute redistribution during solidification with rapid solid state diffusion T. W. Clyne;W. Kurz
27. ISIJ International v.30 no.7 Microsegregation and precipitation behavior during solidificarion in a nick-base superalloy Takashi Sawai (et al.)
28. Metall. Trans. A. v.20A no.12 Solidification of the nick-base superalloy 718 : A phase diagram approach B. Radhakrishnan (et al.)
29. Metall. Trans. A. v.22A no.4 A phase diagram approcch to studt liquation ctacking in alloy 718 B. Radhakrishnan (et al.)
30. Metals Handbook (8th ed.) v.8 ASM
31. Phase diagrams in metallurgy: Their development and application F. N. Rhines
32. Superalloys 718, 625, 706 and various derivatives M. C. Maguire (et al.)
33. Welding J. no.10 The Vatestraint test W. F. Savage;C.D. Lundin
34. Welding J. no.11 Application of the Vatestraint technique to the study of weldability W. F. Savage;C.D. Lundin
35. Procedings of the JDC university research symposium New concepts on Vatestraint testing for hot cracking C. D. Lundin;C.H. Lee
36. Welding J. no.10 Weldablity of high-strength, low expansion superalloys S. C. Ernst
37. Metall. Trans. B. v.13A The effect of melt composition on reference to continuous casting T. W. Clyne;W. Kurz
38. Solidification processing M. C. Flemings