• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.10a
• /
• pp.8-13
• /
• 1996

균질 매질내에 형성되는 근거리 음장의 해석에는 종래 회절 이론에서의 Rayleigh 적분식에 근거한 Lommel 근사식이 주로 이용되어져 왔다. 그러나, 불균질한 매질에서는 그 방법의 적용이 어렵고, 유한요소법등 새로운 방법이 적용되어야 한다. 본 연구에서는 불균질 매질에서의 음장을 해석하는 한 방법으로 Angular Spectrum법을 제안하고, 경계를 가상한 등수온의 물에 대하여 Lommel 근사식에 의해 직접 산출한 음장과 Angular Spectrum법을 적용하여 산출한 음장을 서로 비교함으로써 그 유효성을 검토하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.10 no.5
• /
• pp.46-50
• /
• 1991

고체내부에 존재하는 결함의 에이지에서 회절되는 반사신호의 스페그럼을 해석하여 결함의 크기 를 결정하는 방법을 연구하였다. 실험을 위하여 순도 99.99%의 알루미늄 재료를 샘플로서선택하고 표면 에서 20mm 깊이에 반경 3500μm, 높이 1000μm 의 동전형 결함을 제작하였다. 결함의 탐상은 피치-캐 치법으로 하였으며, 스펙트럼분석에 의한 결함의 기존의 펄스 반사법에 의한 측정값과 비교하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.6
• /
• pp.399-409
• /
• 2012

In this paper we propose a method for measuring the shear modulus of an ultrasound soft tissue phantom using an acoustic radiation force. The proposed method quantitatively determines the shear modulus based on the rise time of a displacement induced by an acoustic radiation force at the focal point of a focused ultrasound beam. The shear wave speed and shear modulus obtained from the proposed method and a shear wave propagation method were compared to verify the validity of the proposed method. In the shear wave propagation method, the shear modulus is first computed by measuring the propagating speed of a shear wave induced in a phantom by a limited-diffraction transmit field, and then was compared to that obtained with the proposed method in an ultrasound data acquisition system calibrated based on the first computed shear modulus. The relative errors between the two methods were found to be 4% for shear wave speed and less than 9% for shear modulus, confirming the usefulness of the proposed method.

• Geophysics and Geophysical Exploration
• /
• v.25 no.4
• /
• pp.203-213
• /
• 2022

To understand an underlying geological structure via seismic imaging, the velocity information of the subsurface medium is crucial. Although the full-waveform inversion (FWI) method is considered useful for estimating subsurface velocity models, 3D FWI needs a lot-of computing power and time. Herein, we compare the calculation efficiency and accuracy of frequency-domain 2D and 3D acoustic FWIs. Thereafter, we demonstrate that the artifacts from 2D approximation can be partially suppressed via frequency-domain 2D FWI by employing diffraction angle filtering (DAF). By applying DAF, which employs only big reflection angle components, the impact of noise and out-of-plane reflections can be reduced. Additionally, it is anticipated that the DAF can create long-wavelength velocity structures for 3D FWI and migration.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.3
• /
• pp.114-121
• /
• 1995

Outdoor experimental study is presented the insertion loss caused by barrier considering discontinuous ground condition. Measurements ware made in 1/3 octave band over the frequency range 315 Hz~3150 Hz with the various geometry of the source, receiver and barriers. The frequency range of the interference pattern depends on the phase difference between path from the edge of barrier to receiver, and hence on the acoustical properties of the ground on the receiver side of the barrier. The insertion loss by barrier, in addition to diffraction, is shown to be dependent on the ground characteristic.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.2
• /
• pp.113-120
• /
• 2003

Rayleigh was an excellent experimenter as well as a theorist. Rayleigh improved Rijke's sounding device by heat and the singing flame into sources of pure tones. Above all, his making of the artificial bird whistle was a critical achievement in the improvement of experimental sound sources. This source made supersonic waves available in the laboratory and thus paved the way to confirmable observations of reflection, refraction, diffraction and interference of sound in the laboratory Furthermore, Rayleigh augmented the sensitivity of sensitive flames as detectors for sound wave. Besides, he devised a phonic wheel which could precisely control the angular velocity of some acoustical instruments and made the Rayleigh-disk that enabled experimenters to measure the absolute value of the sound intensity. These devices enhanced the exactness of acoustical experiments.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.4
• /
• pp.287-293
• /
• 2013

We present a parametric array signal generating system using $3{\times}16$ transducer array which is composed of multi-resonant frequency transducers of 20kHz and 32.5kHz. To drive transducer array, sixteen channel amplifier using LM1875 chips is designed and implemented, and the PXI system based on the LabView 8.6 for arbitrary signal generation and analysis is used. Using the proposed system, we measure sound pressure level and beam pattern of difference frequency and verify the nonlinear effect of difference frequency. The theoretical absorption range and the Rayleigh distance are 15.51m and 1.933m, respectively and we verify that sound pressure of difference frequency is accumulated and increased at the near-field shorter than the Rayleigh distance. We verify that the beam pattern of the measured difference frequency and the beam pattern obtained by the superposition of two primary frequencies are similar, and high directional parametric signal was generated.

• Journal of the Korean Magnetics Society
• /
• v.16 no.3
• /
• pp.163-167
• /
• 2006

Ultrasonic irradiation in a solution during the chemical reaction may accelerate the rate of the reaction and the crystallization at low temperature. We have synthesized nanometer sized magnetite particles using coprecipitation method, sonochemical method without surfactant, and sonochemical method with surfactant, in order to investigate the effect of ultrasonic irradiation and surfactant on the coprecipitates of metal ions. The size of the magnetite nanoparticles prepared by coprecipitation method, and sonochemical method without surfactant showed broad distributions. But we got uniform nanoparticles using a sonochemical method with oleic acid. The average size of the particles can be controlled by the ratio $R=[H_2O]/[surfactant]$. The size of the magnetite nanoparticles prepared by this method showed narrow distributions. We have characterized the nanoparticles using an X-ray diffraction (XRD), a superconducting quantum interference device (SQUID), and atomic force microscope (AFM). The size and distribution of the magnetite nanoparticles were measured by dynamic light scattering (DLS) method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.207-210
• /
• 2014

This paper is concerned with the prediction of lift-off acoustic loads for a launch vehicle. Intense acoustic load is generated when a launch vehicle is lifted off, and it can induce vibrations of a launch vehicle which cause damage or malfunction of a launch vehicle and a satellite. Lift-off acoustic loads of NARO are predicted by the modified Eldred's second method and the result is compared with the measured data in flight test. The prediction shows similar peak and shape of spectrum to the test data, but some discrepancy can be observed due to the predicted margin. In order to reduce such discrepancy, the sound pressure levels with four source distribution assumptions are calculated. Also, the surface diffraction effects are considered in the predict ion of lift-off acoustic loads, and the predicted result is more similar to the test data.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.153-156
• /
• 1999

이 연구에서는 구조적 HRTF(Head-Related Transfer Function) 모델의 구성 이론에 관하여 기술하였다. 이 모델은 강체 구(rigid sphere)에 대한 음파의 전파와 회절 현상에 대한 이를 식을 근거로 구성하였다. 이 모델은, 구성이 단순하고, 모델 구성에 필요한 계수의 수를 극소화 할 수 있기 때문에 실시간 구현에 적합하다. 그리고, 각개인의 머리전달특성에 따른 개인차를 반영하여 모델을 수정할 수 있는 장점이 있다.