• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.167-170
• /
• 1998

음성신호의 특징적인 성분인 피치를 검출하는 알고리즘 중 실시산 구현이 손쉬운 3단계를 클리핑 알고리즘을 PC상에서의 처리를 위하여 구현하였다. 이 알고리즘을 통하여 검출되는 피치의 안정성 및 정확성을 높이기 위해서 적용된 창함수, LPF, 클리핑 자기상관값계산, 비선형 감쇄, 등의 전처리 필터링과, 배수피치 검출 및 정정, 메디언 필터링을 사용하여 피치를 검출하였다. 또한 이 알고리즘을 이용하여 DSP의 도움을 얻지 않고 PC상에서 음성을 분석하여 스펙트로그램, 파형, 에너지, 피치 등을 출력하는 프로그램인 Visual Analysis Tool for sounds(VAT)의 출력화면을 통하여 피치검출을 나타내었다.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.44-57
• /
• 2001

This paper analyses the performance of FFTSA (Fast Fourier Transform Synthetic Aperture) in the effects of temporal coherence and oscillatory towed course, which is one of the techniques for passive synthetic aperture SONAR process using linearly distributed towed array. Also this paper proposes the FFTSA technique using towed array having conformal shape to alleviate the performance degradation for estimating the incident angle under inconsistent under water environments. And this paper analyses the performance of the proposed FFTSA technique making use of conformal structure throughout exhaustive computer simulations.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.1
• /
• pp.67-75
• /
• 2011

The present work investigate the effect of sound reinforcement systems on the acoustics of a large dome stadium using a computer simulation. The acoustics of a dome stadium was predicted analyzed by varying room absorption, as well as the configuration of speakers including their directivity, installed height, and numbers. It was found that both D50 and RASTI were improved by increasing room absorption. Larger EDTs were observed according to the increase of room absorption at mid and high frequencies. On the other hand, RT did not show any significant correlation with the changes in room absorption, which might be the effect of a forced linear fitting for non -linear energy decay process. With respect to the speaker configuration, the speech intelligibility of a sound reforcement system installed at higher placed more relied upon their directivity rather than room absorption, Also, lower placing of speakers was found to be effective in decreasing RTs regardless of room absorption.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.73-76
• /
• 2006

Acoustic cavity as a stabilization device to control high-frequency combustion instabilities in liquid rocket engine is adopted and its damping capacity is verified in atmospheric temperature. Geometric effects of acoustic cavity on damping characteristics are analyzed and compared quantitatively. Satisfactory agreements have been achieved with linear acoustic analysis and experimental approach. Results show that the acoustic cavity of the largest orifice area or the shortest orifice length was the most effective in acoustic damping of the harmful resonant frequency finally, it is proved that an optimal design process is indispensable for the effective control of combustion instabilities.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.1317-1320
• /
• 2000

본 논문에서는 한국전자통신연구원 VR 연구센터에서 개발한 비선형 MPEG-2 편집 시스템인 "솔거 (Solger2001)"를 소개한다. 솔거는 PC 환경에서 MPEG-2 스트림 데이터를 편집할 수 있는 통합형 비선형 편집기로, MS 사의 DirectShow 기반의 서브모듈(sub-module)로 개발된 여러 필터들을 기반으로 다양한 시각/음향효과 처리를 제공한다. 이외에도 코덱의 속도론 높이기 위하여 Intel 의 MMX 기술을 적용하였다. 솔거의 특징은 시스템의 구성 가격을 낮추기 위하여 하드웨어 부가 장치 없이 모든 하부 모듈을 소프트웨어만으로 구성하였으며. DirectShow 필터를 기반으로 개발하여 시스템의 확장성과 이식성을 높였다.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.2
• /
• pp.109-120
• /
• 2021

This paper proposes the H∞ norm based data association gate method to apply robustly the data association gate of passive sonar automatic target tracking which is on non-linear targets in dense cluttered environment. For target tracking, data association method selects the measurements within validated gate, which means validated measuring extent, as candidates for the data association. If the extent of the validated gate in the data association is not proper or the data association executes under dense cluttered environment, it is difficult to maintain the robustness of target tracking due to interference of clutter measurements. To resolve this problem, this paper proposes a novel gating method which applies H∞ norm based bisection algorithm combined with 3-σ gate method under Gaussian distribution assumption and tracking error covariance. The proposed method leads to alleviate the interference of clutters and to track the non-linear maneuvering target robustly. Through analytic method and simulation to utilize simulated data of horizontal and vertical bearing measurements, improvement of data association robustness is confirmed contrary to the conventional method.

• 한국전산유체공학회:학술대회논문집
• /
• 1995.10a
• /
• pp.197-202
• /
• 1995

비정상(unsteady) 압축성(compressible) 유동에 의한 공력음향(aeroacoustics)을 모사하여 공력소음원을 해석하기 위해서는 고차(high order)의 정확도와 높은 해상도(resolution)를 가지며, 상대적으로 계산시간을 많이 필요로 하지 않는 외재적(explicit) 유한차분법이 필수적으로 요구된다. 이것은 주어진 차분방식과 격자계로써 공간과 시간상에 존재하는 미소크기의 파동성분들을 충분히 구현하여야 만족할 만한 수치해를 얻을 수 있기 때문이다. 본 연구에서는, 그러한 유한차분법 중 최근에 관심의 대상이 되고있는 삼각(tridiagonal)또는 오각(pentadiagonal) 집적유한차분법(compact finite difference scheme)이 최대의 해상도를 갖도록 하는 수학적인 방법을 개발하고, 이 방법으로써 새롭게 집적유한차분법을 최적화하였다. 개발된 최적화 방법은, 푸리에 해석법(Fourier analysis)을 통하여 파동수(wavenumber) 영역에서 수학적으로 계산된 위상오차(phase error)를 최소화하는 것이며, 이러한 개념과 방법은 본 연구에서 처음으로 집적유한차분법에 적용되었다. 여러가지 절단정확도(truncation order)에 대해서 최적화 된 집적유한차분법들이 실제 공간과 시간상에서 보여주는 정확도와 오차특성을 알아보기 위하여, 이 방법들을 1차원 선형파동방정식에 적용하였고, 이 결과를 통하여 가장 정확하고 효과적인 절단정확도의 집적유한차분법을 선별하였다. 특히, 오각(pentadiagonal)법에 비해 더욱 효율적인 6차 삼각(tridiagonal)법을 1차원 Euler방정식에 적용하여, 비선형 파동에 대한 모사를 수행할 수 있었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.17-20
• /
• 2007

Effect of radial position of half-wave resonator is investigated experimentally for acoustic damping of tangential mode in a combustion chamber by adopting acoustic cold test. When resonator with optimal tuning length is installed， damping is enhanced as its radial location is away from the center of the faceplate. And, radial profile of damping factor is similar to that of the amplitude of the acoustic mode to be damped. As the location is close to the center, acoustic damping is mitigated and independent on the resonator length. on the other hand， the resonator with non-optimal length dose not show any effect of its radial position.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.5
• /
• pp.458-463
• /
• 2010

Since the acoustic nonlinearity is sensitive to the minute variation of material properties, the nonlinear ultrasonic technique(NUT) has been considered as a promising method to evaluate the material degradation or fatigue. However, there are certain limitations to apply the conventional NUT using the bulk wave to thin plates. In case of plates, the use of Lamb wave can be considered, however, the propagation characteristics of Lamb wave are completely different with the bulk wave, and thus the separate study for the nonlinearity of Lamb wave is required. For this work, this paper analyzed first the conditions of mode pair suitable for the practical application as well as for the cumulative propagation of quadratic harmonic frequency and summarized the result in for conditions; (1) phase matching, (2) non-zero power flux, (3) group velocity matching, and (4) non-zero out-of-plane displacement. Experimental results in aluminum plates showed that the amplitude of the secondary Lamb wave and nonlinear parameter growed up with increasing propagation distance at the mode pair satisfying the above all conditions and that the ration of nonlinear parameters measured in Al6061-T6 and Al1100-H15 was closed to the ratio of the absolute nonlinear parameters.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.4
• /
• pp.352-357
• /
• 2008

The detection of micro cracks in materials at the early stage of fracture is important in many structural safety assurance problems. The nonlinear ultrasonic technique (NUT) has been considered as a positive method for this, since it is more sensitive to micro crack than conventional linear ultrasonic methods. The basic principle is that the waveform is distorted by nonlinear stress-displacement relationship on the crack interface when the ultrasonic wave transmits through, and resultantly higher order harmonics are generated. This phenomenon is called the contact acoustic nonlinearity (CAN). The purpose of this paper is to prove the applicability of CAN experimentally by detection of micro fatigue crack artificailly initiated in Aluminum specimen. For this, we prepared fatigue specimens of Al6061 material with V-notch to initiate the crack, and the amplitude of second order harmonic was measured by scanning along the crack direction. From the results, we could see that the harmonic amplitude had good correlation with COD and it can be used to detect the crack depth in more accurately than the common 6 dB drop echo method.