• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.82-85
• /
• 2008

A Helmholtz resonator is applied to control high frequency combustion instability in liquid rocket engine. Damping characteristics of the Helmholtz resonator are investigated by the flow characteristic and its design. To simulate combustion instability, resonance in a test section(with fixed volume) is made by a pressure pulsator, and then damping characteristics are investigated. Its orifice length and diameter are selected as the design parameters and flow rates are varied to reveal the effect on damping characteristics. The experimental results show that a Helmholtz resonator is also working with flows. When length and diameter of an orifice are small, the tuning frequency increases as the flow velocity increases.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.10
• /
• pp.777-784
• /
• 2003

Acoustic response control of a corner-pinned plate using piezoelectric wafers was studied, both theoretically and experimentally Three different sizes of aluminum alloy plates were used and available ball joints were employed to hold the plate at the four corners. The plate with the largest aspect ratio showed the largest and most clear responses to the acoustic excitation in the range of frequencies (0∼200 Hz), and sound pressure levels (80∼100 dB) as predicted. The reduction of the acoustic response of the plate by piezoelectric actuator was very significant, more than expected, but abatement of the sound transmission through the plate was only slightly altered by the piezoelectric actuator. This work is an original work extending earlier work with doors excited by acoustic fields. The important difference is the used of ball joints to simulate the joints.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.3
• /
• pp.25-39
• /
• 1992

Undesired vibratory motion of a simply supported plate is controlled with piezoelectric sensors and actuators. Appropriate dynamic equations of the sensor and actuator are derived and coupled with the dynamic equation of the plate for the construction of an active feedback vibration control system. Analytic solutions are obtained for amplitude response of the plate, reflecting the combined effect of external driving forces and piezoelectric control moments. Numerical examples are presented to illustrate the effectiveness of this approach for two types of external forces, i.e. a concentrated point load and a piezoelectric plate driver. Calculation results show that the sensors and actuators can be efficient tools to mitigate the sensitivity of the structure to external sources of vibration. The method investigated in this work is applicable to arbitrary external loading conditions and control algorithms.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.6
• /
• pp.499-505
• /
• 2009

Main design issues for MAC (Medium Access Control) protocol in underwater sensor networks are long propagation delay caused by the low speed of sound, difficult synchronization, and energy-limited node's life. We aimed to mitigate the problems of strict synchronization and channel inefficiency of TDMA and also the throughput degradation induced by unavoidable collisions in contention based MAC protocols. This proposed protocol improved not only the energy efficiency by adopting a sleep-mode, but also the throughput by reducing collisions and increasing channel efficiency.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.5
• /
• pp.480-487
• /
• 2003

To improve environmental control in various plants, signal characteristics of plants have been studied by a nondestructive technique. In this paper, the acoustic emission (AE) from plants was analyzed for water stress dependency. AE signals were taken from gymnosperm and angiosperm. AE sensor detected AE signals from the plant stem underneath the plant surface below the sensor. AE hit-event counts in daytime were more than those in night time, and it was found that the daily hit counts pattern was strongly affected by the water stress in the plant. frequency bands of AE signals from the angiosperm was different from those from the gymnosperm. Frequency bands of AE in outdoor condition were in accord with those in indoor having similar conditions.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.8
• /
• pp.468-473
• /
• 2011

Speech may not be clearly understandable in the room that is highly reverberant, due to the loss of consonants intelligibility. Therefore, it is very important to obtain a high sound pressure level of direct sound in reverberant room. A properly designed sound reinforcement system can not provide the good speech intelligibility without the absorption treatments of walls. With using the highly directional speaker, we can transmit the sound energy into only the areas where people are sitting. This can be help to improve the speech intelligibility. In this paper, even in reverberant rooms, it will be shown that the good speech intelligibility can be obtained by only the directivity control of speaker without the room treatment. Also, it would be more improved by the properly room tuning using an equalizer.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.68-77
• /
• 2017

High-frequency combustion instability results from a feedback coupling between the unsteady heat release rate and the acoustic waves formed resonantly in the combustion chamber. It can be modeled as thermoacoustic problems with various degrees of the assumptions and simplifications. This paper presents numerical analysis of self-excited combustion instabilities in a variable-length lean-premixed combustor and designs of passive control devices such as baffle and acoustic resonators in a framework of 3-D FEM Helmholtz solver. Nonlinear behaviors such as steep-fronted shock waves and a finite amplitude limit cycle are also investigated with a compressible flow simulation technique.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.7
• /
• pp.22-27
• /
• 1998

본 논문에서는 ETRI에서 개발한 가변 어휘 음성 인식기의 어휘 독립 음향 모델링 방법을 기술하고, 이 모델의 어휘 종속, 어휘 독립 및 어휘적응 성능을 평가하기 위하여 다 양한 고립단어 및 연속음성 DB에 대하여 실험한 결과를 분석하였다. 평가를 위하여 사용한 음성 DB로는 고립단어 음성으로 POW(Phonetically Optimized Words) 3848, PBW(Phonetically Balanced Words) 445, PBW 452, 호텔예약 244 단어, 게임 제어용 단어 등이며, 연속음성으로 일반 문장 음성 및 연속 숫자음을 이용하였다. 성능 분석 결과 40개 음소 모델만으로도 비교적 높은 인식률을 보여 주었지만, 어휘독립의 경우는 어휘종속에 비 하여 성능이 크게 낮았고, 특히 대상 어휘가 숫자음, 알파벳, 연속음 등의 경우에는 POW 데이터나 PBW 데이터만 가지고는 우수한 가변 어휘 음성 인식기를 구현하기에 한계가 있 음을 알 수 있다. 또한, 훈련 데이터의 어휘와 평가데이터의 어휘가 비슷할 경우에는 변이음 모델을 사용하면 음소 모델만을 사용할 경우에 비하여 그 성능이 우수하였지만, 일반적인 어휘독립의 상황에서는 효과가 별로 없음을 알 수 있었다.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.1
• /
• pp.25-31
• /
• 1999

This paper proposes a new wide-band beamforming algorithm which has Gaussian weighting at nested linear array for acoustic measurement. The beamforming is performed one-shot by using all sensors simultaneously, not octave-by-octave. Gaussian weighting of frequency-dependent function is applied to each sensor before time-delay compensation so as to control the frequency receiving band of each sensor. As the results of the simulations, it is confirmed that the proposed algorithm can form the one-shot beams having uniform directivity index and also it can be applied to the broad-band acoustic measurement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1444-1453
• /
• 1993

비 구조적인 주면 환경에서 평면 팔레트(planar pallet)를 포크리프트(forklift)로 적재하거나 하역하기 위한 물류용 재료운송 로보트 시스템을 제안한다. 제안한 시스템은 음향(acoustic)센서와 시각(visual) 센싱데이타를 사용하여 팔레트에 지정된 2개의 스롯(slot)의 위치를 결정하고 포크리프트를 팔레트의 스롯에 인게즈(engage) 한다. 본 연구에서는 재료운송 시스템의 복잡성을 줄이기 위해서 폴라로이드(Poraloid) 음향센서의 3차원 거리 데이터와 CCD 카메라에서 얻은 2차원 시각 네이타를 통합하는 방법을 개발한다. 2개의 다른 소스로부터 얻은 데이타는 서로의 미비점을 보안하며 재료운송 로보트 시스템을제어하기 위한 효율적인 알고리즘을 제공한다. 카메라는 far-away vision 개념에 의한 음향센서의 선형 스캔닝(scanning) 대역을 우선 결정한다. 선형 스캔닝에 의하여 얻어지는 거리 데이타(range Map)는 least mean square방법을 사용하여 팔레트의 위치와 자세(position and orientation)를 결정한다(near vision). 팔레트에 대한 위치와 자세가 결정되면 다시 시각센서를 이용하여(close vision) 에지(edge)탐지와 Hough transfrom 기술을 적용하여 팔레트에 대한 포크리프트의 인게이지먼트 위치를 구한다. 개발된 시스템은 하드웨어와 소프트웨어로 구현하고 평가하며 실험적인 결과도 제시한다.