• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.25-41
• /
• 2011

AVO analysis was conducted on hydrocarbon-bearing structures by applying the crossplot and offset-coordinate amplitude polynomial techniques. To evaluate the applicability of the AVO analysis, it was conducted on synthetic data that were generated with an anticline model, and field data from the hydrocarbon-bearing Colony Sand bed in Canada. Analysis of synthetic data from the anticline model demonstrates that the crossplot method yields zero-offset reflection amplitude and amplitude variation with negative values for the upper interface of the hydrocarbon-bearing layer. The crossplot values are clustered in the third quadrant. The results of AVO analysis based on the coefficients of the amplitude polynomial are similar to those from the crossplots. These well correlated results of AVO analysis on field and synthetic data suggest that both methods successfully investigate the characteristics of the reflections from the upper interface of a hydrocarbon-bearing layer. Analysis based on the incident-angle equation facilitates the application of various interpretation methods. However, it requires the conversion of seismic data to an incident angle gather. By contrast, analysis using coefficients of the amplitude polynomial is cost-effective because it allows examining amplitude variation with offset without involving the conversion process. However, it warrants further investigation into versatile application. The two different techniques can be complement each other effectively as AVO-analysis tools for the detection of hydrocarbon reservoirs.

• Geophysics and Geophysical Exploration
• /
• v.19 no.3
• /
• pp.164-173
• /
• 2016

Cable-free seismic technology is to acquire seismic data with independent receivers which are not connected by cables. This is an effective method for survey designs with less topographical conditions. With technology advancement for cable-free receivers, reliable data quality, easy deployment, and picking up the receivers, the cable-free technology has begun to apply to land seismic acquisition. In this study we introduced a cable-free seismic system and its equipment. We tried to build up the cable-free seismic technology through the field application. In the seismic tomography field applications, the seismic signals of the cable-free receiver and cabled receiver with the same distance from the source show the same phase in early stage. The difference of the first arrival times between two signals is less than 0.4 ms, which could be accepted. In the field application for seismic reflection exploration, we acquired shot gathers with different source depth and dynamite charge. The shot gathers from cable-free and cabled system are similar to each other. With an efficient method for receiver deployment and survey design, the application of the cable-free technology will increase.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.398-402
• /
• 2005

Structureborne noise induced by shipboard equipment is one of the most significant noise source of ships and can be effectively reduced by resiliently mounting them. In this paper, the pole parameter method is investigated for estimating the structureborne noise reduction of resiliently mounted equipment. In addition, we suggest how to evaluate pole parameters from dimensional and material information of each component consisting of resiliently mounted equipment. To validate and discuss the proposed method numerical analysis for single and double resiliently mounted equipment systems using both pole parameter method and FEM have been done.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.417-426
• /
• 2006

Geophysical survey has been conducted on the continental margin off the South Shetland Islands aboard R/V Onnuri of KORDI in 1992/1993. About 800-line km of 96-channel reflection data have been acquired. On the seismic section, BSR with strong reflectivity and negative polarity has been found at 700 ms below the sea bottom. BSR is considered as the base of gas hydrates and AVO analysis was performed to study physical properties along BSR. True amplitude recovery and surface consistence amplitude were applied to seismic data and angle gathers were obtained. AVO gradient and AVO intercept are calculated on every CDP gather. Section of AVO intercept show strong reflectivity and negative polarity on BSRs and stronger continuity of BSR than stacked section. Cross plot of P-G indicates that the lower layer below BSR is filled with free gas.

• Elastomers and Composites
• /
• v.49 no.2
• /
• pp.95-102
• /
• 2014

The noise between floors of apartment has been hot issue nowadays. In order to improve the noise insulation performance, we proposed the antivibration rubber system which can be applied to the floor system for sound insulation. Among various types of elastomer, butyl rubber showed the good aging characteristic, low rebound resilience and high damping factor. Thus, the butyl rubber was selected as a basic rubber for antivibration rubber system. The effects of type and loading amounts of carbon black on antivibration properties of butyl rubber were studied. The increase of surface area and the content of carbon black resulted in high bound rubber fraction, high mechanical property, low rebound resilience, and high damping factor of butyl rubber. Based on the results of this study, the new antivibration rubber was prepared and applied to the floor system for sound insulation. The impact sounds of floor system proposed in this study were 40 dB and 43 dB in cases of light weight and heavy weight impact sound, respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.4 no.2
• /
• pp.48-55
• /
• 1985

포물선형 혼 도파관을 사용하여 입사파의 음향전력밀도를 증대시킴으로써 압전물질의 압전비선 형성을 이용한 평판형 구조의 탄성 음향파 콘벌버를 제작하고 스펙트럼 확산 통신방식에서 S/N 비가 S 높으며 프로그램이 가능한 자기상관정합 필터로 사용될 수있음을 실험적으로 제시하였다. 본 실험에서 는 포물선형 혼 도파관을 사용한 탄성 음향파 콘벌버를 압전 재료인 YZ-LiNbO\sub 3\ 위에 중심 주파 수 100MHz 압축비 11:1, 적분시간 6인 IDT, 포물선형 혼 도파관 및 출력단자를 설계한 후 이를 포토리 토그라피 바업으로 제작하여 100 MHz 로 펄스 변조된 신호를 탄성 음향파 콘벌버의 양 입력에 인가하 여 자기상관 출력을 얻음으로써 신호 처리 이득이 18dB인 정합필터를 구현하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.5
• /
• pp.285-290
• /
• 2006

The evaluation of clamping condition has been regarded as the main issue in the safety-maintenance of the clamped high-tension bolts. For this, this paper proposes a method to estimate the axial stress by measuring the TOF (Time-Of-Flight) of ultrasonic wave, which is based on the acoustoelasticity or the dependency of sound speed on the stress. In this method, however, the variation of sound speed within the range of stress induced under the field condition is very small, and thus the accuracy of the TOF measurement is important. We adopted the phase detection method using tone-burst ultrasonic wave to measure the precise TOF. In order to verify the usefulness of the proposed method experiments are carried out and the results were compared with the stress measured by the strain gage. The results show good agreement with each other, and from these we can conclude that the proposed method is highly useful fnr the evaluation of clamping condition in the clamped high-tension bolts.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2747-2754
• /
• 2010

Cupping therapy has been used to extensive diseases. However, the research was yet to meridian and acupoint's change of state caused by Cupping. This study was considered a human-ripple effect by the anlaysis of meridian & acupoint's change of state. We developed the system which is keeps 30kPa Negative-pressure and stimulated on the Left Lung Meridian(LU) a halfway point between LU4 and LU5. We checked moisture and elasticity change on left/right acupoints & non-acupoints, then measured EMG Signal. We observed that moisture had little change(12.49%) and the better part of the elasticity on both sides had identified the change(64.42%). The number of the provoked acupoiunt elasticity change was more than non-acupoint. Also, elasticity change of Right side was more than Left side. We confirmed that RMS and Median Power change patterns were lower in proportional to the elastin change, but there was no significance about Median Frequency. Therefore inducing the change of elasticity and EMG signal on meridian-acupoints. Therefore, We checked the human-ripple effect Negative-pressure by the Cupping therapy.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.672-675
• /
• 2009

동해 울릉분지에서 취득된 다중채널 탄성파자료 해석에 의하면 이 지역에는 가스하이드레이트 부존가능성을 지시하는 해저모방반사면, 탄성파침니/칼럼, 음향공백대, 증폭반사면, 가스분출 구조 등을 포함하는 5가지 탄성파 지시자가 존재한다. 가장 대표적인 지시자인 해저모방반사면은 연구지역의 남쪽사면의 경우 연속성이 양호하고 강한 진폭을 갖는 반면, 북쪽 중앙분지에서는 상대적으로 진폭이 약하고 연속성이 불량하다. 반사도 감소 및 속도 풀업 특징을 갖는 탄성파 침니/칼럼구조는 중앙분지와 북동쪽해역에 주로 분포하며 가스하이드레이트 혹은 가스유체의 부존가능성을 시사해준다. 반사강도가 약화되어 나타나는 음향공백대는 저탁류/원양성 퇴적물이 분포하는 중앙분지에 부분적으로 발달하며, 칼럼과 연계된 음향공백대는 북동쪽 사면저부에 주로 분포한다. 해저모방반사면의 하부에 위치하는 증폭반사면은 연구지역의 서쪽 사면에 분포하며 강한 음의 진폭특성으로 보아 자유가스를 함유한 층으로 해석된다. 가스분출구조는 주로 쇄설성 퇴적물이 우세한 조사지역의 남쪽 대륙사면지역에 광범위하게 분포하며 돔구조 혹은 폭마크 등을 수반한다.

• Journal of the Korean Society of Radiology
• /
• v.82 no.6
• /
• pp.1556-1564
• /
• 2021

Purpose This study aimed to apply MR elastography (MRE) to achieve in vivo evaluation of the elastic properties of thigh muscles and validate the feasibility of quantifying the elasticity of normal thigh muscles using MRE. Materials and Methods This prospective study included 10 volunteer subjects [mean age, 32.5 years, (range, 23-45 years)] who reported normal activities of daily living and underwent both T2-weighted axial images and MRE of thigh muscles on the same day. A sequence with a motion-encoding gradient was used in the MRE to map the propagating shear waves in the muscle. Elastic properties were quantified as the shear modulus of the following four thigh muscles at rest; the vastus medialis, vastus lateralis, adductor magnus, and biceps femoris. Results The mean shear modulus was 0.98 ± 0.32 kPa and 1.00 ± 0.33 kPa for the vastus medialis, 1.10 ± 0.46 kPa and 1.07 ± 0.43 kPa for the vastus lateralis, 0.91 ± 0.41 kPa and 0.93 ± 0.47 kPa for the adductor magnus, and 0.99 ± 0.37 kPa and 0.94 ± 0.32 kPa for the biceps femoris, with reader 1 and 2, respectively. No significant difference was observed in the shear modulus based on sex (p < 0.05). Aging consistently showed a statistically significant negative correlation (p < 0.05) with the shear modulus of the thigh muscles, except for the vastus medialis (p = 0.194 for reader 1 and p = 0.355 for reader 2). Conclusion MRE is a quantitative technique used to measure the elastic properties of individual muscles with excellent inter-observer agreement. Age was consistently significantly negatively correlated with the shear stiffness of muscles, except for the vastus medialis.