• Korean Journal of Plant Resources
• /
• v.18 no.1
• /
• pp.117-122
• /
• 2005

Moisture and quantum were measured to investigated out the growth characteristics of Adenocaulon himalaicum which is one of the important plants at the forest plants. The herbal medicines of Adenocaulon himalaicum known as one of the main mountain edible herbs have great value of resources according to the report that dopamine causing schizophrenia is greatly reduced with it. The moisture is a primary factor for the growth of Adenocaulon himalaicum. In this study we showed that the site with little change of temperature and under $200\;{\mu}mol\;s^{-1}m^{-2}$ quantum is suitable. Also, the maintenance of relative humidity over $50\%$ is a very important factor in the proliferation of shady spot plants.

• Journal of the Korean association of regional geographers
• /
• v.15 no.6
• /
• pp.689-706
• /
• 2009

It is usual to prioritize the spatial variables that influence housing location by a few specialist's experienced knowledge or intuition. Multiple regression techniques were used to evaluate the spatially prioritized relationships between housing density and seasonal solar intensity parameters for a total of 134 house locations. Solar radiation and duration of sunshine on winter solstice was the most important predictor of house density located in intermontane basin. In contrast to the typical theory, elevation, slope and accessibility to road were not a dominant determining factor upon the dependent variable of house density. A clear verification has been made for the hidden assumptions for the arrangement of typical Korean housing in intermontane basin that its approach is found to be more appropriate in avoiding shadow conditions, rather than exploring the ideal landform location.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.29-34
• /
• 2002

주요 결과를 요약하면 다음과 같다. 가. 벼 종자, 상토, 흔합 접착액 등 펠렛재료를 스크류 컨베이어에 의해 회전 성형롤에 공급, 압축성형 배출함으로써 직경 12 mm의 구형 벼 펠렛종자를 제조할 수 있는 벼 펠렛종자 제조장치를 설계·제작하였다. 나. 설계·제작된 벼 펠렛종자 제조장치의 제조능력은 시간 당 약 13,000 개 ∼ 37,000 개인 것으로 나타났고 이때 성형률은 약 61% ∼ 71%였다. 하지만 벼 종자 손실률은 약 17% ∼ 48%로 매우 큰 것으로 나타나, 펠렛재료의 손실과 종자손상을 줄이기 위한 성형롤 및 펠렛재료 공급장치의 개선이 필요한 것으로 보인다. 다. 제조된 펠렛종자의 무게는 제조 직후에는 1.66 g, 완전 건조 후에는 약 1.3 g으로 나타났으며, 제조된 펠렛종자의 직경은 약 12.0 mm에서 건조 후 약 11.2 mm로 축소되었다. 라. 제조된 한 개의 벼 펠렛종자 내 포함된 벼 종자의 개수는 상토와 벼 종자의 혼합비에 따라 다르게 나타났는데 혼합비 6 : 1에서 펠렛종자 당 종자 개수는 4.1 립, 혼합비 7 : 1에서 3.6 립, 그리고 혼합비 8 : 1에서는 3.1 립으로 나타났다. 마. 건조 후 벼 펠렛종자의 압축강도를 측정한 결과 건조기를 이용한 경우는 118 N ∼ 137 N, 음지 건조의 경우는 88 N ∼ 108 N으로 조사되었으며, 대체적으로 운반 및 파종 과정에서의 취급성은 문제가 없을 것으로 보인다.

• Journal of Korean Medical classics
• /
• v.19 no.4
• /
• pp.147-168
• /
• 2006

통과대이연화장개빈관우중풍관점적비교연구, 이급기대중풍적분류(以及基對中風的分類), 증상(證狀), 치료(治療), 예후적관점진행분석득출여하결론(豫後的觀點進行分析得出如下結論): 이연파중풍적원인분류위진중풍(李挻把中風的原因分類爲眞中風), 겸중풍(兼中風), 류중풍(類中風), 사중풍(似中風), 종이조취료구분외풍여내풍계기(從而造就了區分外風與內風契機). 대어중풍적원인(對於中風的原因), 장개빈주장배제외풍근한어내풍적관점(張介賓主張排除外風僅限於內風的觀點). 재차기초상(在此基礎上), 설기여조헌가주장진수고갈급진화허시기원인소재(薛己與趙獻可主張眞水枯褐及眞火虛是基原因所在), 대차관점(對此觀點), 장수신적"중풍각전"중, 기유찬동적(旣有贊同的), 역유지비판의견적내용(亦有持批判意見的內容). 대어중풍적증상(對於中風的證狀), 이연근거병사소재분위중장, 중부(中부), 중혈맥(中血脈), 중경등(中經等). 우기대중경증적분류(尤基對中經證的分類), 재기타의서중시무법견도적분류적표준(在基他醫書中是無法見到的分類的標準). 저가이인위(這可以認爲), 타이 "금궤요략" 위의거(爲依據), 시부합내풍적증상분류(是符合內風的症狀分類). 장개빈파비풍적증상종대적방면분위경병화장병(張介賓把非風的症狀從大的方面分爲經病和臟病), 연후재파경병세분위경증화위증(然後在把經病細分爲經證和危證), 장병세분위초경증화위증(臟病細分爲稍經證和危證). 진관경병출현어지체(盡管經病出現於肢體), 이장병출현정신이상(而臟病出現精神異常), 단시경병여장병균유경증화위증(但是經病與臟病均有經證和危證). 저일주장시흔유지이성적. 대중풍적치료(對中風的治療), 이연대체상견지료금원이전적치료방법. 기용신한혹신온거풍화담(旣用辛寒或辛溫去風化痰), 혹용신온발한(惑用辛溫發汗), 혹용고한공리등(或用苦寒攻裏等). 장개빈지출상술방법대원기쇠약적중풍부적합사용(張介賓指出上述方法對元氣衰弱的中風不適合使用), 차장수신지출차시거풍치법실제상부적합내용풍이적합어외풍적치료(且張壽신指出此時去風治法實際上不適合內風而適合於外風的治療). 장개빈인위비풍적원인시진양여진음지허이불시풍담(張介賓認爲非風的原因是眞陽與眞陰之虛而不是風痰), 진관시급성기(盡管是急性期), 여과몰유담증(如果沒有痰證), 타견결반대사용거담지법(他堅決反對使用祛痰之法). 재중풍치료상(在中風治療上), 장개빈인위한다(張介賓認爲汗多), 소변소(小便少), 시진액부족소치(是津液不足所致), 소이수유열증역불요사용삼리지법, 병지출유뇨증시신허소치적위증(幷指出遺尿症是腎虛所致的危證), 종이진일보강조료진액적중요성(從而進一步强調了津液的重要性).

• Parasites, Hosts and Diseases
• /
• v.33 no.4
• /
• pp.305-312
• /
• 1995

A species of metacercariae recovered from the fresh-water fish, collected from Kaumji (Pond), Kaechonji (Pond) and Ssanggyechon (River), Uisong-gun, Kyongsangbuk-do, Korea, was identified as Clinostomum compzcnatum by morphological observation and experimental infection to chicks. The excysted metacercariae, tongue-shaped and progenetic, were 3.28-4.27 mm in length and 0.94-1.46 mm in width. The adult flukes recovered from the chicks four days after infection were 4.20-4.86 mm long and 1.14-1.49 mm wide. Twelve species of the fresh-water fish were found to be infected with the metacercariae. The infection rate ranged from 1.6% (Zacco temminkii) to 88.9% (Acheilognathus rhombec and Microphwsogobio voluensis) . The intensity was highest in Cnrqssius curatus (13.0/fish infected) and the abundance (relative densityl was highest in A. rhombea (7.8/fish examined). This survey demonstrated for the first time the source of human infection by C. complnnntum in Korea.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.281-285
• /
• 2012

The aim of this research was carried out that leafty and tonic vegetable using garlic (Allium victorialis L. var. platyphyllum Makino) makes use of landscape ground-cover plant. Following shading level treatments (30%, 50%, 80%), garlic was cultivated to investigate plant growth characteristic and chlorophyll content. Leaf number of all treatments was unaffected, and 80% shading treatment had grown vigorous growth 16.8 cm leaf length and 10.1 cm leaf width compared to 13.4 cm leaf length and 7.3 cm leaf width for the non-shading treatment. Fresh weight of non-shading treatment was better than those of three shading treatments, however, 80% shading treatment had produced 10.4 g fresh weight of stem part compared to 8.5 g for the for the non-shading treatment. The chlorophyll content of the 50 and 80 shading treatments showed 42.8% and 40.5% respectively. These treatments increased 36.7% chlorophyll content compared to non-shading treatments. Following shading level treatments, growth characteristics of garlic in 80 shading level treatment shows outstanding growth and it is worthy of planting as shading ground-cover plants.

• Horticultural Science & Technology
• /
• v.16 no.1
• /
• pp.30-32
• /
• 1998

Growth environments of Cypripedium macranthum Sw. habitats distributed in mountains and highland plains of northern part of Kyunggi-do and Kangwon-do in Korea, were studied in order to obtain basic data. Mean temperature in habitats of Cypripedium macranthum was $14^{\circ}C$ and minimum value was recorded $-7^{\circ}C$ in January, and maximum value was $28^{\circ}C$ in August. Mean soil temperature of the orchid sites was $11^{\circ}C$ and minimum value was $-4^{\circ}C$ in January. The light intensity from March to May was 48,000~51,400 lux and the lowest value was 11,500 lux in July. Light intensity in shade habitat sites from July to August was dropped to 470~865 lux, and the SPAD value was 34.3 in July, which was the highest of the year. The range of soil acidity was pH 5.6~5.8 and soil moisture was 16.4%~36.2%. The highest soil moisture was 36.2% on June. The Cypripedium habitats were correlated with temperature (especially high temperature), light intensit, and soil moisture. However, critical factor seems to be soil moisture in distribution of Cypripedium macranthum in Korea.

• Horticultural Science & Technology
• /
• v.16 no.3
• /
• pp.364-365
• /
• 1998

The present study was conducted to develop a more accurate and efficient measure than any other quantifying measures of the leaf variegation when influenced by changes in certain physical and environmental factors. Through this computer quantification for two Tradescantia cultivars, it was ascertained that total leaf area decreased and extent of the leaf variegation increased as light intensity increased. According to this result to determine the brightness of the leaf, using the same aforementioned measurement, the leaf color was brightest in the sun and it become darker as light intensity decreased. High correlation was found between total leaf and leaf variegation area measured by leaf area meter and the pixel of computer graphic file through scanning. Thus, the leaf area and leaf variegation area measurement using computer graphic will be used very efficiently.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.95-102
• /
• 2011

Anti-icing system can immediately respond when snowing is expected or the snow comes down on the road surface. It has been recognized that the system can reduce traffic accidents and congestion by quickly removing the frozen road surface area. However, it is very difficult to implement this system due to the expensive equipment installation and operation cost, Recently, there was a developed program for predicting the freezing area using three-dimensional model and tracking the sun path. But, there is no objective analysis method and all developed approaches are different so that the general standard of anti-icing system is needed. In this study, we proposed the decision criteria for determining application priorities of the anti-icing system based on weather and road conditions, i.e., geometric and topographic conditions. Regional climate survey, topographical analysis, and dynamic vehicle simulation considered road geometry and skid resistance was conducted to standardize the installation method of anti-icing system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.117-122
• /
• 2016

In this paper, we propose 24-GHz CMOS radio frequency (RF) power amplifier for short-range automotive collision avoidance radars. This circuit contains common source stage with inter-stages conjugate matching circuit as a class-A mode amplifier. The proposed circuit is designed using TSMC $0.13-{\mu}m$ mixed signal/RF CMOS process ($f_T/f_{MAX}=120/140GHz$). It operates at the supply voltage of 2V, and it is designed to have high power gain, low insertion loss and low noise figure in the low supply voltage. To reduce total chip area, the circuit used transmission lines instead of the bulky real inductor. The designed CMOS power amplifier showed the smallest chip size of $0.1mm^2$, the lowest power consumption of 40mW, the highest power gain of 26.5dB, the highest saturated output power of 19.2dBm and the highest maximum power-added efficiency of 17.2% as compared to recently reported results.