• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.1
• /
• pp.67-73
• /
• 2017

This study aimed to analyze the fluid inside the ceramic filtration dust collection system which was assumed to be a stationary 3-dimensional turbulence. The fluid dynamics data necessary for performance curves were obtained based on the analysis results. The governing equations used to compute the velocity distribution and pressure inside the catalyst converter were expressed with continuity and momentum equations. Furthermore, the ${\kappa}-{\varepsilon}$ turbulence model, already validated by the industry(coal factory, high temperature dust collector) was used for the study. Of a total of three computational models employed, Model-1 served as the basis for CFD analysis which took measurements in increments of 70mm.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.3
• /
• pp.133-139
• /
• 2018

Precipitator is the most widespread device used to separate dust particles from the exhaust gas. In the shipyard, welding umbrellas, spark protection covers, and ventilators are not purchased and used for the work place to capture the flames and high temperature metal dust generated during the gardening process. In particular, a thorough analysis of design factors, such as capture rate, collection capacity calculation, filter speed, and materials selection, is required since spatial constraints are followed by structures, etc. In this study, conceived to address problems such as this cyclone and filtration filter system that combines all-in-one gausing collector prototype. Assessed through interpretation through the validity of the design and reliability.

• Convergence Security Journal
• /
• v.9 no.2
• /
• pp.41-48
• /
• 2009

Distributed denial of service attack detection for more development and research is underway. The method of using statistical techniques, the normal packets and abnormal packets to identify efficient. In this paper several statistical techniques, using a mix of various offers a way to detect the attack. To verify the effectiveness of the proposed technique, it set packet filtering on router and the proposed DDoS attacks detection method on a Linux router. In result, the proposed technique was detect various attacks and provide normal service mostly.

• Journal of the Korean Society for Railway
• /
• v.8 no.2
• /
• pp.155-160
• /
• 2005

We propose a tram position estimation method for automatic train control system. The accurate train position should be continuously feedback to control system for safe and efficient operation of trains in railway. In this paper, we propose the sensor fusion method integrating a tachometer, a transponder, and a doppler sensor far estimation of train position. The external sensors(transponder, doppler sensor) are used to compensate for the error of internal sensor (tachometer). The Kalman filter is also applied to reduce the measurement error of the sensors. Simulation results are then presented to verify the usefulness of the proposed method.

• Convergence Security Journal
• /
• v.6 no.2
• /
• pp.21-29
• /
• 2006

Recently, illegal manipulation and forgery threats on computer softwares are increasing. Specially, forge the code of program and disrupt normal operation using a malicious loader program against the Internet application client. In this paper, we first analyze and generate signatures of malicious loader detection. And, we propose a method to secure the application client based on profiling which can detect and filter out abnormal malicious loader requests.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2006.06a
• /
• pp.67-72
• /
• 2006

적응신호처리 분야에서 LMS(Least Mean Square) 알고리즘은 수식이 간단하고, 적은 계산 량으로 인해 널리 사용되고 있지만, 시간영역의 적응알고리즘은 입력신호의 고유치 분포 폭이 넓게 분포할 때는 수렴속도가 느려지는 단점이 있다. 본 논문에서는 적응 신호처리의 수렴속도를 향상 시키고 복잡한 계산 량을 줄이는 새로운 fast running FIR 필터 구조를 제안한다. 그리고 제안한 알고리즘을 가변스텝 사이즈 웨이블렛 기반 적응 알고리즘에 적용한다. 실제로 합성 음성을 사용하여 적응 잡음 제거기에 적용하여 컴퓨터 시뮬레이션을 통해 제안한 알고리즘과 기존 알고리즘과의 성능을 비교한다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.268-271
• /
• 2003

There are several methods for the design of 2D filter. Notable among them is McClellan transform method. This transform allows us to obtain a high order 2D FIR filter through mapping the 1D frequency points of a 1D prototype FIR filter onto 2D frequency contours. We design 2D filter using this transform. Then we notice for mapping deviation of the 2D filter. In this paper, Quadratic programming (QP) method allows us to obtain coefficients of McClellan transform. Then we compare deviation of QP method with least-squares(LS) method. Elliptic filter is used for comparison. The optimal cutoff frequencies of a 1D filter are obtained directly from the QP method. Also several problem of LS method are solved.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.109-112
• /
• 2000

고역의 주파수 성분이 감쇠되어 선명도가 저하된 이미지나 선형 보간법에 의해 확대된 이미지의 계단모양 왜곡을 감소시킴으로써 경계선의 선명도가 저하된 이미지들을 위해 형태학적 처리(morphological processing)에 의한 이미지 윤곽선의 선명도를 향상시키는 방법을 제안하였다. 본 논문에서는 블러링(blurring)된 이미지를 화소의 명암에 따라 다수개의 평판 이미지(slice image)로 나누고 각 평판 이미지에 대해 반복적인 최대/최소값 필터(min/max filter)의 적용으로 얻어진 윤곽선의 중심을 기준으로 하여 팽창(dilation)과 침식(erosion)을 수행함으로 이미지의 윤곽선에서의 명암 변화에 대한 경사도를 크게 만들고 이로써 이미지 윤곽선의 선명도를 향상시키는 방법을 사용하였으며 모의 시험결과를 통하여 고역 주파수 강조에 의한 방법에 비하여 인위적인 잡음(artifact)없이 효과적으로 선명도를 향상시킬 수 있음을 보였다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.102-105
• /
• 2003

Up to the present studies of the car number recognition system, it is generally known to have serious problems such as relatively long processing time due to the excessive length of data extracted from the number plate based on the current image characteristics, and the image blurring with the physical damage of the brightness and darkness signals of the number plate caused by external impulses with many difficulties in the extraction of the highlighted numbers. In this Paper we used the characteristics firstly having a constant brightness of number plate, and a high density to the horizontal axis, and the influences of highlighted signal could be reduced by making reflections less through the polarized filter on the camera for any highlighted signal. For the more, the data processing time and the noise reduction are effectively implemented by using the wavelet transform of time-space scale with the considerations on the physical loss and processing time.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.81-84
• /
• 2000

Digital Halftoning convert a continuous-tone images to a binary images. Inverse halftoning addresses the problem of recovering a continuous image from a halftoned binary image. Simple low pass filtering can remove the high frequency noise but it also removes the edge information. Thus the edge information should be separated from the halftoning noise. As a result, the edge of result image is blurring. This paper present that we obtain continuous-tone-image which using Anisotropic diffusion filter. To reduce noise without blurring the edges of reconstructed image use edge map. The experimental results show that proposed method gives a higher PSNR and better subjective quality than conventional methods. As a result, the edge information of reconstructed image reduce blurring.