• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.170-170
• /
• 2011

최근 진공기술은 세계적으로 유럽, 미국 및 일본을 주축으로 개발되어 보급되고 있다. 국내에서는 초기 기술 단계인 수봉식펌프, 유회전펌프, 유확산펌프가 개발되어 있으나 일반 산업용으로만 사용되고 있으며 반도체용으로는 전혀 적용되지 못하고 있는 실정이다. 특히 고청정공간을 필요로 하는 환경인 고집적 반도체 공정 등에는 사용할 수 없다. 본 연구에서 개발하고자 하는 터보형 드라이펌프는 시스템 내에 전혀 오일을 사용하지 않고 저소음 및 고효율, 저진동, 넓은 사용압력범위 등의 이점 때문에 현재 반도체 공정용 펌프로서 크게 각광을 받고 있다. 그러나 수요가 점차 증가함에도 불구하고 아직까지 우리나라는 전량 수입에 의존하고 있다. 이에 본 연구에서는 반도체 공정에 적합한 배기속도와 압축비를 가지는 에너지 절약형의 반도체 공정용 대유량 터보형 드라이펌프를 개발하여 국산화를 도모하고자 한다. 또한 단순히 외국 제품의 복사품을 제작하는 것이 아닌 체계적인 자료 확보를 통한 설계기술의 정립과 제품개발을 목적으로 하고 있다. 향후 전 세계적으로 최고 수준의 반도체 제조기술을 보유하고 있는 국내에서 국산화 및 상용화에 성공한다면 세계의 드라이 진공펌프 시장에도 충분히 우리의 기술력을 입증할 수 있으며, 결과적으로 상용화까지 이루어지리라 기대한다.

• Journal of Welding and Joining
• /
• v.23 no.4
• /
• pp.27-33
• /
• 2005

Quantitative evaluation was performed on the microstructure of flux-cored arc(FCA) weld metal using a method blown as IIW scheme. It was mainly intended to figure out any practical difficulties in applying this method and also to provide the consumable makers with basic guide line in developing FCA welding consumables far better properties. Assessment of the experimental results showed IIW scheme was quite reliable in the low heat input range where the acicular ferrite was a major constituent. However, in the high heat input range, some scatter was noticed as the other phases like grain boundary ferrite and Widmansttaten ferrite become dominant. It implies that the accuracy of IIW scheme depends on the faction of microstructural constituents and it become worse as the fraction of latter two phases increases. This tendency was discussed in terms of the characteristics of those two phases. In addition, base line microstructure of rutile type FCA weld metal was addressed for developing new FCA welding consumables intended for higher heat input welding.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.227-228
• /
• 2011

이 연구는 기름 유출 사고 시 해상에서 실시되는 방제활동을 보다 신속하고 효과적으로 실시하기 위해 사고초기부터 오일붐의 필요량을 신속하고 간단하게 제시해주는 프로그램의 개발에 대하여 알아보려고 한다. 유출유의 기계적회수를 위해 유회수기, 임시저장탱크의 필요수량은 제시되었으나, 오일붐은 제시되지 못하고 있다. 본 연구에서는 해양선진국 및 국제해사기구(IMO)에서 제시한 오일붐의 필요수량에 대한 방법들을 활용해 프로그램에서 유출규모, 유막특징의 입력을 통해 오일붐의 최소 및 권고량이 제시되도록 NI(National Instuments)사(社)의 LabVIEW 2010버전으로 프로그래밍 되었다. 기름유출 시 OBM Program을 이용해 누구나 쉽게 오일붐 필요량을 파악할 수 있고, 신속하게 오일붐의 필요량이 파악되어 방제활동 대응시간을 단축시켜주며, 단축된 대응시간만큼 피해규모의 축소를 기대할 수 있다.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.2
• /
• pp.47-54
• /
• 2009

Integrated construction site management using RFID(Radio Frequency Identification) and facility maintenance introducing USN (Ubiquitous Sensor Network) have been widely used in the mega construction project sites. But, the validation on performance of RFID systems after introducing those has not been carried out. Given that the use of RFID systems have been increased, the construction industry as well as other industries needs the evaluation of the RFID system. By regarding the necessities for evaluation, a research to the satisfaction and importance evaluation of RFID system from the end-users' view point for site management was conducted. Satisfaction-importance matrix of satisfaction standards and importance standards was created (organised) according to the analysis result of a survey, proposed improvement methods and analysis about the items presented by each region like areas of sustainable maintenance, maintenance, progressive improvement and priority improvement. The result would contribute to enhance the utilization of system and its performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.167-172
• /
• 1997

The electron swarm parameters and Energy distribution function have been calculated for electrons motion through CH$_4$ pure gas under the action of uniform electric field for 0.1$\leq$E/N(Td)$\leq$300, at the 300( $^{\circ}$K), using MCS method and Boltzmann transport equation. And then the resulting values of electron drift velocity were compared to experimental data and adjustment made in assumed cross sections until good agreement was obtained. The electron drift velocity is very useful in the fields of study relating to the conductive and dielectric phenomena of gas medium. The electron energy distribution in gas discharge are generally nonmaxwellian , and must be calculated by a numerical solution of the Boltzmann equation which takes in the elastic and inelastic collisions. To analyze the physical phenomena and properties (or electron swarm motion in a gas under the influence of an electric field, the energy distribution function of electrons and the theoretical deriveration of the electron drift velocity are calculated by the Backward Prolongation with respect to the Boltzmann transport equation as a parameter of E/N(Td).

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.209-214
• /
• 2006

This paper desires to assist ensuring of propriety clean-up equipment for clean-up shore or sea of pollution, there is not that responsible ability of a nation has an amount of skimmer or the length of boom. responsible ability of a nation must express overall evaluation what is considering quickly, system, and economizing in addition to an amount or clean-up equipment. responsible ability of a nation is complication and it's mutual relation of each other factor therefore responsible capacity of a nation is expressed using powersim with system dynamics theory.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.1
• /
• pp.67-73
• /
• 1998

In this paper, the electron swarm parameters in the 0.5% and 0.2% SF\ulcorner+Ar mixtures are measured by time of flight method over the E/N(Td) range from 30 to 300(Td). The measurements have been carried out by the double shutter drift tube with variable drift distance from the cathod. A two-term approximation of the boltzmann equation analysis and Monte Carlo simulation have been also used to study electron transport coefficients. We have calculated W, $ND_L,\;ND_T,\;\alpha,\;\eta,\;\alpha-\eta$, and the limiting breakdown electric field to gas mixtures ratio in pure $SF_6$+Ar mixtures. The electron energy distribution function has been analysed in $SF_6$+Ar mixtures at E/N : 200(Td) for a case of the equilibrium region in the mean electron energy. The measured results and the calculated results have been compared each other.

• Journal of Welding and Joining
• /
• v.23 no.5
• /
• pp.14-19
• /
• 2005

In high speed $CO_2$ welding, it has been blown to produce no sound bead with undercut or humping bead. In this study welding phenomena through synchronized high speed camera and output welding voltage and current waveform has been analyzed. For the purpose to improve a welding bead, effect of short circuit current rise slope has been examined. With commercial power source it was produced no sound bead by instantaneous short circuit, long arc period and stubbing at welding speed 2.5mm/min Humping bead or undercut were showed by instantaneous short circuit and long arc period. Also, the weld bead was not formed during the long short circuit period after stubbing start and long arc extinguishment period after wire sticking by failure of arc regeneration, because the droplet was not transferred to weld pool. With increasing short circuit current rise slope the frequency of stubbing was decreased and the normal short circuit rate was increased. A control of short circuit current rise slope was effective factor in high speed welding.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.4
• /
• pp.237-242
• /
• 2010

To do an experimental analysis in this paper, we divided two non-equivalent control groups, such as pre and post test groups for difference listening types by serious game contents. From these test groups, we can achieve the most ability of its activity quotient (ACQ) effect is a phonic type and the next one is an aural type. The purpose of this paper is focused on the quantitative analysis of the human's brain quotient (BQ) derived from serious educational game contents.

• Journal of architectural history
• /
• v.18 no.6
• /
• pp.23-46
• /
• 2009

The history to have used lime in building construction was much long without distinction of the East or the West. The ancient nations of korean peninsula had used lime as construction material. The witness was discovered in the kings' tombs of fifth century. In the Joseon dynasty(15~19c), what applied several developed lime compounds to the kings' tombs have been recorded in 'Sanleong-Uigwe(山陵儀軌)' & 'Yeonggeon-Uigwe(營建儀軌)' of those days documents. Therefore, this paper is to examine the whole procedures from the product and provision of lime to its application through those days documents. Following conclusions have been reached through the study. Three lime compounds to be developed for the kings' tombs was extendedly applied to residential government buildings step by step within the current of time. These compounds to be used in the kings' tombs of the Joseon dynasty had been correlated to those of the ancient nations, which were nations of korean peninsula in narrow range, chinese and orient nations in broad range. These compounds have possibilities of development as the environmental-friendly building material. And these compounds should provide a standard specification for conservation & restoration of the traditional and cultural properties. I could confirm that the whole procedures had not been developed within limited space-time of the specified nation & period, but within interactions of the nations & periods. In the periods which disturb its interaction, the expansion of productivity in building construction was interfered.