• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.5
• /
• pp.545-550
• /
• 2014

This study provided the analytical finite element method estimating the friction-induced noise on the complex beam structure. The frictional contact model was theoretically constructed and applied to the analytical finite element squeal model. The numerical results showed that the beam structure was excited by the mode-coupling instability of the specific system modes. Also, the direction of friction was shown to influence on the dynamic instability of the modes. Besides, the unstable modal frequencies estimated from the numerical calculation were validated by the experiment of the actual beam structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.1990-1995
• /
• 2012

This paper presents design methodology to determine the design parameters that affect the manufacture of aluminum forging piston using the FE simulation and the Taguchi method. Maximum forging load is used as the objective function, and preform, material temperature and draft angle are selected as the design parameters. Their combinations are implemented by orthogonal array, and forging load is evaluated through the simulation. From the analytic results of design parameters to minimize the load using signal to noise ratio, their optimal combinations are proposed. The proposed design methodology will be able to help in selecting proper preform among preforms and to be used in determining the optimal combination of the parameters in metal forming process.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.1-10
• /
• 2015

In this paper, we propose a new multiplication algorithm for primitive polynomial with all 1 of coefficient in case that m is odd and even on finite fields $GF(3^m)$, and design the multiplier with parallel input-output module structure using the presented multiplication algorithm. The proposed multiplier is designed $(m+1)^2$ same basic cells. Since the basic cells have no a latch circuit, the multiplicative circuit is very simple and is short the delay time $T_A+T_X$ per cell unit. The proposed multiplier is easy to extend the circuit with large m having regularity and modularity by cell array, and is suitable to the implementation of VLSI circuit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10C
• /
• pp.973-979
• /
• 2002

In this paper, an efficient architecture for the finite field multiplier is proposed. This architecture is faster and smaller than any other LFSR architectures. The traditional LFSR architecture needs t x m registers for achieving the t times speed. But, we designed the multiplier using a novel fast architecture without increasing the number of registers. The proposed multiplier is verified with a VHDL description using SYNOPSYS simulator. The measured results show that the proposed multiplier is 2 times faster than the serial LFSR multiplier. The proposed multiplier is expected to become even more advantageous in the smart card cryptography processors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2201-2206
• /
• 2008

This paper presents a method of constructing the Linear Digital Switching Function(LDSF) over finite fields. The proposed method is as following. First of all, we extract the input/output relationship of linear characteristics for the given digital switching functions, Next, we convert the input/output relationship to Directed Cyclic Graph(DCG) using basic gates adder and coefficient multiplier that are defined by mathematical properties in finite fields. Also, we propose the new factorization method for matrix characteristics equation that represent the relationship of the input/output characteristics. The proposed method have properties of generalization and regularity. Also, the proposed method is possible to any prime number multiplication expression.

• Journal of the Society of Disaster Information
• /
• v.15 no.2
• /
• pp.259-267
• /
• 2019

Purpose: In this paper adhesive-bonded cylindrical lap joints are analyzed by assuming that the adherends are elastic and the adhesive is linearly viscoelastic. Method: The distribution of the stresses in the adhensive is evaluated using the Finite Element Method. Nuverical examples for identical and different adherends bonded through a four parameter viscoelastic solid adhesive are illustrated. Results: The stress distribution in the adhesive layer with respect to time is shown. The stress distribution in the adhesive layer with respect to time is shown. The results are also shown that adherend thickness and elastic modulus give effect on the normalized stress. Conclusion: In this study, the stress distribution of the adhesive layer of the wrapped cylindrical body considering the viscoelasticity of the adhesive layer was numerically analyzed by using a four - element elastomer model.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.09a
• /
• pp.188-192
• /
• 2005

나노 구동용 선형 모터는 이송체의 구동에 따른 진동과 열 특성으로 인하여 발생되는 기구간의 진동과 기계적인 마찰력 변화로 나노위치제어에 어려움이 있다. 그러므로 이송체에 대한 진동과 열에 대한 분석이 필요하다. 본 논문에서는 개발된 선형 모터의 이송체를 무부하 상태에서 유한 요소 해석을 통해 진동 특성을 분석하고 실험계획법을 적용하여 이송체에 대하여 최적화된 설계 방향을 제시하고자 한다. 또한 이송체의 진동 특성을 고려한 경량화를 통해 선형 모터의 안정된 구동을 모색하고자 한다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.3
• /
• pp.259-271
• /
• 2013

The purpose of this study was to make the stress distribution produced by simulated different load under two types of internal connection implant system (stepped and tapered type) by means of 3D finite element analysis, The finite element model was designed with the parallel placement of the one fixtures ($4.0mm{\times}11.5mm$) with reverse buttress thread on the mandibular 1st molar. Two models were loaded with 200 N magnitude in the vertical direction on the central position of the crown, the 1.5 mm and 3 mm buccal offset point from the central position of the fixture. The oblique load was applied at the angle of $30^{\circ}$ on the crown surface. Von Mises stress value was recorded and compared in the fixture-bone interface in the bucco-lingual dimension. The results were as follows; 1. The loading conditions of two internal connection implant systems (stepped and tapered type) were the main factor affecting the equivalent bone strain, followed by the type of internal connections. 2. The stepped model had more mechanical stability with the reduced max. stress compared to $11^{\circ}$ tapered models under the distributed oblique loading. 3. The more the contact of implant-abutment interface to the inner wall of implant fixture, the less stress concentration was reduced.

• Journal of the KSME
• /
• v.50 no.4
• /
• pp.42-45
• /
• 2010

초속 수 킬로미터에 달하는 탄자 충돌 해석과 같은 고속 충돌 문제는 매우 짧은 작용시간, 지배적인 과도 응답 상태, 관성효과의 중요성 등을 특징으로 들 수 있다. 이 글에서는 고속 충돌 해석을 위한 삼각형/사면체 요소를 적용한 operator-splitting 유한 요소 해석 기술에 대해 소개하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.3
• /
• pp.197-203
• /
• 2009

Finite field arithmetic is very important in the area of cryptographic applications and coding theory, and it is efficient to use normal bases in hardware implementation. Using the fact that $GF(2^{mk})$ having a type-I optimal normal basis becomes the extension field of $GF(2^m)$, we, in this paper, propose a new serial multiplier which reduce the critical XOR path delay of the best known Reyhani-Masoleh and Hasan's serial multiplier by 25% and the number of XOR gates of Kwon et al.'s multiplier by 2 based on the Reyhani-Masoleh and Hasan's serial multiplier for type-I optimal normal basis.