• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.3
• /
• pp.58-65
• /
• 2004

Thermal and structural finite element analyses were performed for the turbopump turbine bladed disk model with shroud of a liquid rocket engine. The only 1/80 part model was analyzed which consists of 3D eight node isoparametric solid elements. The applied loading history consists of a startup condition with a thermal spike and a steady state. Heat transfer coefficient on the blade was predicted using the commercial Navier-Stokes solver, Fluent. Transient thermal responses during startup and steady states were calculated using a 3D finite element code developed. Maximum stress and shroud tip displacement under the influence of centrifugal and thermal loading were also determined.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.4
• /
• pp.335-341
• /
• 2017

In this paper, beam finite elements with higher-order derivatives' continuity are formulated and evaluated for various boundary conditions. All the beam elements are based on Euler-Bernoulli beam theory. These higher-order beam elements are often required to analyze structures by using newly developed higher-order beam theories and/or non-classical beam theories based on nonlocal elasticity. It is however rare to assess the performance of such elements in terms of boundary and loading conditions. To this end, two higher-order beam elements are formulated, in which $C^2$ and $C^3$ continuities of the deflection are enforced, respectively. Three different boundary conditions are then applied to solve beam structures, such as cantilever, simply-support and clamped-hinge conditions. In addition to conventional Euler-Bernoulli beam boundary conditions, the effect of higher-order boundary conditions is investigated. Depending on the boundary conditions, the oscillatory behavior of deflections is observed. Especially the geometric boundary conditions are problematic, which trigger unstable solutions when higher-order deflections are prescribed. It is expected that the results obtained herein serve as a guideline for higher-order derivatives' continuous finite elements.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.227-237
• /
• 1993

This paper dealt with numerical analysis of sand drain considering the smear effect around drain wells and discontinuous deformation behavior due to difference in rigidity between drain materials and adjacent clayey soils. Biot's equation was selected as governing equation coupled with MODCAM (Modified Cam-clay) model or EVP(Elasto-Viscoplastic) model as constitutive equation. The validity as well as the accuracy of the method developed by author was checked by comparing the proposed method with those by Siriwardane and Ghaboussi using joint element. The FEM analysis developed in this study was applied to both 2-dimensional model foundation and actual foundation. the result of which proved to be satisfactory.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.804-805
• /
• 2008

이 논문은 열계와 히스테리시스 손실로 인한 추가적인 열원을 프라이자흐 모델의 전자기장과 결합된 유한요소법을 이용한 동기형 릴럭턴스 전동기(SynRM)의 특성 해석을 다루었다. 이 논문의 초점은 SynRM에서 동손과 히스테리시스 손실과 관계된 열해석이다.

• Journal of Energy Engineering
• /
• v.27 no.4
• /
• pp.13-19
• /
• 2018

In this study, the lightweight design of butterfly valve disc component for power plant based on topology optimization was performed. Here, commercial finite element (FE) analysis software was used. The external shape of the basic disc model was not deformed, and the internal element density was removed to make it lightweight. Optimal design was performed each other after the disc plate and two brackets attached on the surface of the disc were separated. Once the optimal shapes were selected, they were assembled to build up the 3-D lightweight valve disc model. After applying pressure to this model, FE analysis was performed to confirm the structural safety.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.5
• /
• pp.307-314
• /
• 2023

This study aims to evaluate the blast performance of shear and flexure failure modes of reinforced concrete columns using finite-element analyses. To accomplish this goal, finite-element models of flexure- and shear-governed columns were developed and validated using previous experimental results. A blast simulation model was developed using a coupling-modeling method, and the modeling method was applied to the validated-column models. Blast responses were obtained for various blast loading scenarios, and the blast performance was determined using limits based on ductility and axial loading capacity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.7
• /
• pp.827-833
• /
• 2011

In this study, a simulation model to estimate the current-collection performance of a high-speed train was developed by using a commercial finite element analysis software, SAMCEF. A three-dimensional springDdamperDmass model of a pantograph was created, and its reliability was validated by comparing the receptance of the model to that of the actual pantograph. The wave propagation speed of the catenary model was compared with the analytical wave propagation speed of the catenary system presented in the UIC 799 OR standard. The length of the droppers was controlled, and the pre-sag of the contact wire due to gravity was considered. The catenary and the pantograph were connected by using a contact element, and the contact force variation when the pantograph was moved at velocities of 300 km/h and 370 km/h was obtained. The average, standard deviation, maximum, and minimum values of the contact force were analyzed, and the effectiveness of the developed simulation model was examined.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.224-224
• /
• 2004

제품 개발 초기 단계에서 제품의 개념을 신속하게 구체화하여 제품의 기능, 구성, 부품 간 관계, 치수 및 간단한 형상들을 정의한 후, 검증(해석 및 실험)을 통해 가장 최적화된 설계 결과를 얻는다. 그러나 이 과정에서 일반적으로 설계 정보를 바탕으로 해석을 수행하기 위한 모델을 새롭게 생성해야 하는 문제가 있다. 또한 설계 변경이 발생하는 경우에는 도면을 다시 작성하고 해석 모델이 재생성 및 부품 생성을 위하여 데이터 입력을 다시 해야 한다. 이러한 문제는 선박의 초기 설계 및 해석 분야에서도 발견할 수 있다.(중략)

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.190-200
• /
• 1991

Certain structural components are exposed to high temperatures. At high temperature, under thermal and mechanical loading, metal components exhibit both creep and plastic behavior. The unified constitutive theory is to model both the time-dependent behavior(creep) and the time-independent behavior(plasticity) in one set of equations. Microscopically both creep and plasticity are controlled by the motion of dislocations. A finite element method is presented encorporating a unified constitutive model for the transient analysis of viscoplastic behavior of structures exposed to high temperature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2183-2188
• /
• 2009

This paper describes an automatic mesh generation system for finite element analysis of three-dimensional cracks. It is consisting of fuzzy knowledge processing, bubble meshing and solid geometry modeler. This novel mesh generation process consists of three sub-processes: (a) definition of geometric model, i.e. analysis model, (b) generation of bubbles, and (c) generation of elements. One of commercial solid modelers is employed for three-dimensional crack structures. Bubble is generated if its distance from existing bubble points is similar to the bubble spacing function at the point. The bubble spacing function is well controlled by the fuzzy knowledge processing. The Delaunay method is introduced as a basic tool for element generation. Practical performances of the present system are demonstrated through several mesh generations for 3D cracks.