• Title/Summary/Keyword: 유한요소모델링

Search Result 1,010, Processing Time 0.033 seconds

Finite Element Analysis for Prestressed Force Evaluation of PSC Beam (PSC 보의 긴장력 평가를 위한 유한요소해석)

  • Lee, Hong-Pyo;Jang, Jung-Bum;Hwang, Kyeong-Min;Song, Young-Chul
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 2010.04a
    • /
    • pp.645-648
    • /
    • 2010
  • 논문에서는 부착식 텐던 격납건물의 유효긴장력 평가를 위해서 제작된 테스트 빔에 대한 고유진동수 해석을 수행하였고, 그 결과를 기술하였다. 제작된 테스트 빔은 원전 격납건물의 1/5 축소모형으로 설계하였고, 긴장력 수준을 5가지로 분류하여 실험에 의한 고유진동수와 SI(System Identification)기법을 위하여 모델링한 3차원 유한요소해석에 의한 고유진동수를 비교 분석하였다.

  • PDF

유한요소해석과 연구방향

  • 곽병만
    • Journal of the KSME
    • /
    • v.26 no.2
    • /
    • pp.96-101
    • /
    • 1986
  • 유한요소해석과 관련하여 그 분야와 과정을 소개하고 각각에 대하여 현재 연구의 중점방향과 예상되는 장래 집중연구 과제등을 기술하였다. 특히 공통적 기하학적 자료베이스에서부터 해 법자체와 나아가서 이들 결과의 설계응용의 자동화 또는 전문가 시스템화의 종합적인 방향이 장래 전문적인 제품설계의 방향으로 될 것을 주장하였다. 구분적인 연구는 사용자 편의의전. 후처리 프로그램, 대변형 비선형문제, 비선형 재료문제, 비선형 동적문제, 유한요소 모델링 기법, 설계와의 연계등에서 큰 진전이 있을 것으로 보고 이를 중심으로 기술하였다.

  • PDF

서지탱크의 최적설계

  • 지상현;김민수
    • Journal of the KSME
    • /
    • v.31 no.1
    • /
    • pp.34-42
    • /
    • 1991
  • 복잡한 형상의 서지 탱크를 CAEDS의 GEOMOD를 이용하여 내부의 리보까지 포함한 용기를 모델링하였으며, 설계 부피를 검사하고 GEOMOD와 GFEM 사이의 직접 데이터 교환을 통하여 구조 해석에 필요한 유한요소를 만들었다. 유한요소법에 최적화 이론을 적용하여 서지탱크의 두께 변화에 따른 응력의 설계 민감도를 구하였으며, 민감도를 근거로 보강 위치 및 국부적인 용기의 두께를 결정하였다. 유한요소법 프로그램(IFES, GFEM)과 솔리드 모델러(GEOMOD), 그리고 최적화 기법(IFES-Optimization)을 모두 통합하여, 최적 설계를 수행함으로써 반복되는 실험에 의한 시간과 경비를 줄임과 동시에 신뢰성 있는 설계방법 및 방향을 제시하였다.

  • PDF

Mesh Generation Methodology for FE Analysis of 3D Structures Using Fuzzy Knowledge and Bubble Method (피지이론과 버블기법을 이용한 3차원 구조물의 유한요소해석을 위한 요소생성기법)

  • Lee, Joon-Seong;Lee, Eun-Chul
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.19 no.2
    • /
    • pp.230-235
    • /
    • 2009
  • This paper describes an automatic finite element mesh generation for finite element analysis of three-dimensional structures. It is consisting of fuzzy knowledge processing, bubble meshing and solid geometry modeler. This novel mesh generation process consists of three subprocesses: (a) definition of geometric model, i.e. analysis model, (b) generation of bubbles, and (c) generation of elements. One of commercial solid modelers is employed for three-dimensional solid structures. Bubble is generated if its distance from existing bubble points is similar to the bubble spacing function at the point. The bubble spacing function is well controlled by the fuzzy knowledge processing. The Delaunay method is introduced as a basic tool for element generation. Automatic generation of finite element for three-dimensional solid structures holds great benefits for analyses. Practical performances of the present system are demonstrated through several mesh generations for 3D geometry.

Three-Dimensional Resistivity Modeling by Serendipity Element (Serendipity 요소법에 의한 전기비저항 3차원 모델링)

  • Lee, Keun-Soo;Cho, In-Ky;Kang, Hye-Jin
    • Geophysics and Geophysical Exploration
    • /
    • v.15 no.1
    • /
    • pp.33-38
    • /
    • 2012
  • A resistivity method has been applied to wide range of engineering and environmental problems with the help of automatic and precise data acquisition. Thus, more accurate modeling and inversion of time-lapse monitoring data are required since resistivity monitoring has been introduced to quantitatively find out subsurface changes With respect to time. Here, we used the finite element method (FEM) for 3D resistivity modeling since the method is easy to realize complex topography and arbitrary shaped anomalous bodies. In the FEM, the linear elements, also referred to as first order elements, have certain advantages of simple formulation and narrow bandwidth of system equation. However, the linear elements show the poor accuracy and slow convergence of the solution with respect to the number of elements or nodes. To achieve the higher accuracy of finite element solution, high order elements are generally used. In this study, we developed a 3D resistivity modeling program using high order Serendipity elements. Comparing the Serendipity element solutions for a cube model with the linear element solutions, we assured that the Serendipity element solutions are more accurate than the linear element solutions in the 3D resistivity modeling.

Risk Analysis of Structures Subjected to Blast Loads Using 3D Information Models (3차원 모델을 이용한 폭파하중에 대한 구조물 위험평가 해석)

  • Shim, Chang-Su;Yun, Nu-Ri;Song, Hyun-Hye
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 2010.04a
    • /
    • pp.272-275
    • /
    • 2010
  • 폭파하중에 대한 구조물 위험평가 해석을 위해 3차원 모델링 기법 중 하나인 변수모델링과 이를 활용한 3차원 유한요소해석 모델을 구축하여 외연적 유한요소해석을 수행하였다. 폭파하중은 ConWep을 이용하였고, 폭파압력 저감을 위해 알루미늄 폼의 밀도와 두께, 그리고 덮개 여부를 해석 변수로 설정하였다. 해석 결과, 알루미늄 폼의 밀도가 낮고 두께가 두꺼울수록 항복강도 수준으로 제어할 수 있었고, 폭발압력을 분산시키기 위해 사용한 강재 덮개는 두께에 대한 그 영향이 뚜렷이 나타났다. 적절한 설계변수 설정을 통해 폭파하중에 대한 구조물의 위험을 줄일 수 있을 것으로 예상된다.

  • PDF

Analysis of Vibration-Noise Characteristics of a Passenger Car (승용차의 진동 소음 특성 해석)

  • 성명호;이장무;김석현;박동철
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 1993.10a
    • /
    • pp.87-92
    • /
    • 1993
  • 본 연구에서는 반연성해석(Semi-coupling analysis) 즉 음향 응답이 구조와 음향 시스템의 모달 계수로 표현되는 방법과 구조-음향 연성계수를 이용한 소음저감의 예를 제시한다. 이전까지의 연성해석에서는 해석의 신뢰성을 위 하여 실험에서 구한 구조 모우드를 사용하였다. 그러나 설계단계에서 차실소 음을 예측하고 설계변경의 자료를 제시하기 위해서는 유한요소법을 이용한 예측이 필수적이다. 본 연구에서는 부분 구조 합성법, 주요 결합부에 상세 유한요소 모델의 정적해석등에 의한 등가모델링 기법, 감도해석을 이용한 결 합부 모델링기법을 이용한 유한요소법 구조모우드해석과 그 결과를 이용한 연성해석의 결과를 보여준다.

  • PDF

Finite Element Modeling of Geogrid-encased Stone Columns in Soft Clay (지오그리드 보강 쇄석 말뚝 공법의 유한요소해석 모델링)

  • Yoo, Chung-Sik;Song, Ah-Ran;Lee, Dae-Young;Kim, Sun-Bin;Park, Si-Sam
    • Journal of the Korean Geosynthetics Society
    • /
    • v.6 no.1
    • /
    • pp.17-25
    • /
    • 2007
  • This study presents a modeling approach for geogrid-encased stone column(GESC) method which is widely used in Europe as an alternative to conventional pile foundations. Several benefits of using the stone column method include sound performance, low cost, expediency of construction, and liquefaction resistance, among others. Recently, geosynthetic-encased stone column approach has been developed to improve load carrying capacity through increasing confinement effect. The aim of this research is to establish a systematic approach for modeling of GESC and to form a database for the fundamentals of GESC. This paper presents details of 3D modeling of GESC together with the general behavior of GESC.

  • PDF

Effect on Material Property on the Frature Propagation Behavior (재료의 취성과 연성이 균열의 진전에 미치는 영향)

  • Jeong, Jaeyeon;Woo, Kyeongsik
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.42 no.11
    • /
    • pp.919-926
    • /
    • 2014
  • In this paper, the effect of material properties on fracture behavior was studied using cohesive zone model and extended finite element method. The rectangular tensile specimen with a central inclined initial crack was modeled by plane stress elements. In the CZM modeling, cohesive elements were inserted between every bulk elements in the predicted crack propagation region before analysis, while in the XFEM the enrichment to the elements was added as needed during analysis. The crack propagation behavior was examined for brittle and ductile materials. For thin specimen configuration, wrinkle deformation was accounted for by geometrically nonlinear post-buckling analysis and the effect of wrinkling on the crack propagation was investigated.

Effective Finite Element Modeling for a Large Mirror System Using Separated Node Connectivity (비공유 Node를 이용한 대구경 거울의 효율적인 유한요소 모델링)

  • Pyun, Jae-Won;Yang, Ho-Soon;Lee, Jong-Ung;Moon, Il Kweon
    • Korean Journal of Optics and Photonics
    • /
    • v.28 no.6
    • /
    • pp.304-313
    • /
    • 2017
  • The finite element analysis for optimizing a mirror system consisting of a large-diameter mirror and flexures requires numerous, repetitive calculations and corrections of the actual model to satisfy the given design conditions. In general, modification of this real model is conducted by reconfiguring nodes of the elements. The reconfiguration is very time-consuming work, to fix the continuity of each of the newly formed component nodes at the interfaces. But the process is a very important factor in determining the analysis time. To save time in modeling and actual computation, and to attain faster convergence, we present a new opto-mechanical analysis using non-shared node connections at each of the interfaces of the optical components. By comparing the results between the new element model and a conventional element model with shared node connections, we found that the opto-mechanical performance was almost the same, but the time to reach the given condition was drastically reduced.