• 대한조선학회논문집
• /
• 제35권4호
• /
• pp.27-37
• /
• 1998

선박이 대형화되고, LNG선의 건조가 활발해지면서 액체화물탱크의 내부유동을 뜻하는 슬로싱에 대한 연구가 중요해지고 있다. 슬로싱에 의한 충격압력의 크기와 특성을 파악하기 위하여 직사각형 모델에 대한 체계적인 실험을 수행하여 회전각, 동요주파수, 적재수심에 따른 내부유동의 특성을 분석하였고, 충격압력이 가해지는 탱크벽면의 구조응답을 계측하여 유탄성효과를 고찰하였다. 탱크의 내부유동은 고차경계요소법을 이용하여 해석하였고, 평판의 진동에 의해 유기되는 유체력은 고유함수 전개법을 이용하여 부가질량과 감쇠력으로 표현하였다. 충격하중이 작용하는 경우 유탄성 효과를 고려한 탱크 벽면은 부가질량의 영향으로 그 때의 수심에 해당하는 접수진동수로 진동하였고, 벽면에서 압력은 유탄성효과를 고려하지 않은 경우에 비해 두 배 이상 크게 나타났다. 이를 실험과 계산에서 모두 확인하였고, 충격하중에 의한 평판의 거동에서 유탄성효과를 규명하였다

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.496-497
• /
• 2009

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.719-721
• /
• 2014

• 대한조선학회지
• /
• 제33권4호
• /
• pp.13-20
• /
• 1996

해양공간 활용을 위해 예상되는 부유식 해양구조물은 단위구조들이 결합된 형태의 초대형 구조물로서 단위 구조물간의 탄성변형 문제가 매우 중요시되고 있으며 이에 따라 단위구조물간의 상호작용이 고려된 유체력 산출과 탄성응답이 고려된 해석법의 개발이 전세게적으로 활발히 이루어지고 있다. 독립 부유구조물 자체의 크기가 대형화될 때 발생하는 탄성 변형 또한 구조 해석 및 진동관점에서 중요한 고려사항이며, 이는 조선공학분야에서 유탄성 해석기법에 바탕을 두고 연구가 활발히 진행중이다. 본 고에서는 부유구조물의 설계에 있어 핵심기술중 하나인 파랑응답 해석기술의 현황에 대해 살펴보고 현재 한국기계연구원에서 수행중인 국책연구개발사업 "해양공간이용 대형 복합플랜트 개발"의 세부과제인 "부유구조물 파랑응답 해석기법 개발"의 추진내용에 대해 환경 하중/응답해석기술, 계류시스템 설계/해석기술, 유탄성응답 해석기술로 나누어 소개하고자 한다. 해석기술로 나누어 소개하고자 한다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2013년도 특별논문집
• /
• pp.85-89
• /
• 2013

In the engine room and the aft body, there are so many fluid tanks such as fresh water tank and oil tank. The vibration analysis for the fluid tank structures has to consider the added mass effect due to the fluid. However, it is known that the result of the fluid tank has the difference according to the boundary condition of the fluid field such as infinite fluid and finite fluid. In this paper, a numerical case study is carried out for the research about the vibration characteristics of the fluid tank with various fluid field. In addition, an experimental study is carried out to verify the validity of the vibration analysis for the fluid tank structure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.534-537
• /
• 2012

Hydroelastic effects on sloshing phenomena in a rectangular tank are numerically investigated. The dimension of the tank is $1000mm{\times}600mm$, and the filling ratio of water is 20% of tank height. One of the side walls of tank is assumed to be flexible. The tank is excited into sway motion with amplitude of 100mm and frequency of 0.53Hz that is first natural frequency of water inside the tank. Prediction results for time histories of pressure and displacement of flexible and rigid walls are compared to quantitatively assess hydroelastic effects on sloshing phenomena.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.855-860
• /
• 2006

In this paper, a numerical case study is carried out on the hydroelastic vibration of rectangular plate with various fluid field. It is assumed that the tank wall is clamped along the plate edges. The VMM(Virtual Mass Method) of Nastran is used for the simulation of fluid domain and calculating natural frequency of fluid-coupled structure. In this paper, natural frequencies are calculated and compared for rectangular plates with various fluid field such as infinite fluid and finite fluid, length change of finite fluid field and various fluid contacting conditions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.65-68
• /
• 2005

In this paper, a theoretical study is carried out on the hydroelastic vibration of a rectangular tank wall. It is assumed that the tank wall is clamped along the plate edges. The fluid velocity potential is used for the simulation of fluid domain and to obtain the added mass due to wall vibration. In addition, the vibration characteristics of stiffened wall of the rectangular tank are investigated. Assumed mode method is utilized to the stiffened plate model and hydrodynamic force is obtained by the proposed approach. The coupled natural frequencies are obtained from the relationship between kinetic energies of a wall including fluid and the potential energy of the wall. The theoretical result is compared with the three-dimensional finite element method and then added mass effect is discussed due to tank length and potential mode.

• 한국소음진동공학회논문집
• /
• 제17권1호
• /
• pp.3-9
• /
• 2007

In this paper, a numerical case study is carried out on the hydroelastic vibration of rectangular plate with various fluid field. It is assumed that the tank wall is clamped along the plate edges. The VMM(virtual mass method) of Nastran is used for the simulation of fluid domain and calculating natural frequency of fluid-coupled structure. In this paper, natural frequencies are calculated and compared for rectangular plates with various fluid field such as infinite fluid and finite fluid, length change of finite fluid field and various fluid contacting conditions.

• 한국해양공학회지
• /
• 제22권1호
• /
• pp.22-29
• /
• 2008

A numerical investigation is made on the effects of the location and shape of the front wall of an OWC(Oscillating Water Column) chamber on the hydroelastic response of a VLFS. Most of the studies on the effects of an OWC chamber on the response of a VLFS have assumed the location of the OWC chamber to be at the front of the VLFS. In the present study, an OWC-chamber is introduced at an arbitrary position in relation to a VLFS to determine the influence of the location and shape of the OWC chamber on the hydroelastic response of the VLFS. A finite element method is adopted as a numerical scheme for the fluid domain. or the finite element method, combined with a mode superposition method, is applied in order to consider the change of mass and stiffness The OWC chamber in a piecewise constant manner. or the facilitated anefficient analysis of The hydroelastic response of the VLFS, as well as the easy modeling of different shape and material properties for the structure. Reduction of hydroelastic response of the VLFS is investigated for various locations and front wall shapes of the owe chamber.