• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.8
• /
• pp.433-442
• /
• 2004

Various models and various boundary conditions have been suggested for fluid transport simulations of high density plasma discharges such as the inductively coupled plasma discharge. In this work, we compare the various models using one-dimensional simulations based on the FDM(finite difference method), the upwind scheme, the power-law scheme, and the dielectric relaxation scheme［l］ Comparing the exactness, the numerical stability and the efficiency of the various models. the most adoptable model is suggested.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.394-405
• /
• 2022

This paper presents the numerical estimation results of oil outflows from damaged single-hull and double-hull ships by using computational fluid dynamics (CFD) simulations. A CFD method for multi-phase flow analysis was used, and the effects of numerical parameters on oil flows was investigated. Numerical simulations were conducted to predict the changes in oil outflows under various damage conditions owing to grounding or collision accidents and verified through available experimental results. The present numerical results showed a good agreement with the experimental results according to the geometrical characteristics of single and double hulls. In particular, the oil outflows from double hulls accompanying complex interactions between water and oil were reasonably predicted a shown in the experiment. This study established a reliable CFD technique necessary for estimating the oil outflows of damaged ships.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.308-308
• /
• 2010

본 논문에서는 판토그라프의 공력소음 발생 특성을 규명하기 위하여 단순 모델을 이용하여 그 특성을 분석하였다. 단순 모델은 실제 팬헤드의 사이즈를 고려하여 선정하였고, 이를 통해 음압 해석 알고리즘을 구축하고 소음 발생 메커니즘을 분석하였다. 단순 모델을 선정하여 이를 Lattice Boltzmann Method 를 기반으로 한 전산 유체 해석을 통한 결과를 이용하여 음압 레벨과 음압의 방사형태를 계산하고, 풍동 실험을 통해 이를 검증한다. 풍동 실험에서는 단순 모델을 제작하여 100 km/h 의 속도 환경에서 항력, 양력과 소음을 측정하였다. 단면의 형상에 따른 변화 추이를 검토하였으며 해석결과를 단일 수치로도 정량화하여 제시한다. 최종적으로 정립된 알고리즘을 기반으로 팬헤드의 3 차원 모델을 시뮬레이션 한 결과를 제시한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1169-1173
• /
• 2000

최근에 미국에서는 실선에 대한 충격파 실험의 제약으로 인하여 수치시뮬레이션의 필요성이 더욱 야기되어 1996년도부터 수상함에 대한 실험대체용 수치계산의 가능성에 대한 연구가 시작되었다. 잠수함등과 같이 잠겨진 구조물에 대한 연구는 활발히 이루어졌으나 수상함에 대한 연구는 단순구조물을 대상으로 한 제한적 연구가 이루어져 왔다. 특히 본 연구에서는 아주 복잡한 수상함 구조물을 최대한 정확히 유한요소법으로 모델링하였다. 이러한 실선 충격연구는 실제 실선에 마운트되는 주요 장비의 안정성평가에 아주 중요한 자료를 제공하여주므로 시급한 과제이다. 하지만 수상함의 경우 유체-구조물 상호작용, 자유표면, cavitation등과 같은 해석상의 어려움과 복잡한 구조물의 모델링시 나타나는 현 단계에서의 계산상의 한계 등등 여러 가지 난제가 존재하고 있는 것도 사실이다. 본 논문에서는 수상함 내충격 수치해석의 현기술을 알아보고 수치계산의 발전방향을 제시보고자 한다.

• Journal of Navigation and Port Research
• /
• v.31 no.8
• /
• pp.683-687
• /
• 2007

Hydroelastic deformation of pontoon type floating structure in waves is critical in structural design. Therefore, it is necessary to develop additional technology that make to dissipate the wave energy as the submerged horizontal plate. In this study, we investigate the characteristics of hydrodynamic interaction effect by the submerged plate affecting to the radiation forces on a pontoon type floating structure using numerical analysis. We have developed the numerical method based on the composite grid system that consists of moving and fixed grid to compute the radiation forces due to the heaving motion of pontoon type floating structure and submerged plate. The numerical simulations based on the finite difference method are carried out to solve the fully nonlinear free surface involving the breaking waves and compared with the experimental data to confirm the reliability of the numerical method. Then, we discuss the interaction effects on the hydrodynamic forces that could influence on the hydroelastic response of floating structure.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.2 s.152
• /
• pp.166-173
• /
• 2007

Collision analysis problems between ship to ship can be generally classified into the external mechanics(outer dynamics) and internal mechanics(inner dynamics). The former can be also dealt with the concept of fluid-structure interaction and the use of rigid body dynamic program, depending on the ways handling the hydrodynamic pressure due to surrounding water. In this study, full scale ship collision simulation was carried out, such as a DWT 75,000 ton striking ship collided at right angle to the middle of a DWT 150,000 struck ship with 10 knots velocity, coupling MCOL, a rigid body mechanics program for modeling the dynamics of ships, to hydrocode LS-DYNA. It could be confirmed that more suitable damage estimation would be performed in the case of the collision simulations with consideration of surrounding water through the comparison with the collision simulation results of fixed struck ships without it. Through this study, the opportunity could be obtained to establish a more effective ship collision simulation technique between ship to ship.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.958-963
• /
• 2023

Lately, there has been increasing research on the prediction of motion performance using artificial intelligence for the safe design and operation of ships. However, compared to conventional ships, research on small fishing boats is insufficient. In this paper, we propose a model that estimates the motion response essential for calculating the motion performance of small fishing boats using a deep neural network. Hydrodynamic analysis was conducted on 15 small fishing boats, and a database was established. Environmental conditions and main particulars were applied as input data, and the response amplitude operators were utilized as the output data. The motion response predicted by the trained deep neural network model showed similar trends to the hydrodynamic analysis results. The results showed that the high-frequency motion responses were predicted well with a low error. Based on this study, we plan to extend existing research by incorporating the hull shape characteristics of fishing boats into a deep neural network model.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.656-665
• /
• 2021

In this study, trim tabs were attached to end of stern hull of a small high-speed vessel of length approximately 10 m and Froude number 1.0 to improve resistance performance and passenger comfort. Before computational fluid dynamics (CFD) simulations to assess the performance according to various geometries of the trim tab, the scale effect had been found through a previous study, so full-scale simulations were performed. The trim tab chord length was set to 0.5 %, 1.0 % and 1.5 % of L_PP, and its angle to base line was varied in intervals of 5°. It decreased trim by stern and flotation: the greater the angle and length, the greater was the effect. Then it had pressure resistance decreased and shear resistance increased, and reduction ratio of total resistance varied accordingly. The results of this study indicated that the resistance performance was improved about 27 % at optimal running attitude that was the trim by stern about 1.5°.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.2
• /
• pp.164-171
• /
• 2002

In this study, a mass-spring model is used to dynamically describe and calculate the shape and movement of a mid-water trawl system. This mathematical model theorizes that the factors constituting the system are the material points and the external forces such as hydrodynamic load, gravity, and buoyancy act on these material points. In addition, it surmises that these material points are connected to each other by springs, the springs do not have any mass, and the internal force acts on these springs. The non-linear differential equations are implicitly integrated with time for guaranteeing a stable solution. The dynamic simulation by the mass-spring model shows the status of the gear such as fishing gear depth, distance between doors, shape of the gear, and tension of each line. It depends on the parameters such as towing force, warp length, force of a sinker, buoyancy of a float, type of door and netting materials. The validity of the model is verified by comparing simulation motions of a trawl system obtained from computed values to those from an actual experiment.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.472-475
• /
• 2012

MDF(Medium Density Fiberboard) 제조공정에 필요한 열매유(SHTF, Synthetic Heat Transfer Fluid)를 가열하는 보일러에서 화재가 발생하였다. 열매유 보일러는 1차 패스, 2차 패스, 3차 패스로 구성되어 있으며, 화재가 발생된 1차 패스 연소대 위쪽 14단 부근에서 열매유가 방출되었다. 화재확산으로 인한 조사내용 및 데이터를 토대로 화재 시뮬레이션용 전산유체역학인 ANSYS-CFX를 이용하여 재현하고 화재 모델링 해석 및 분석을 통해 화재 온도를 산정하고 피해의 범위를 규정하였다. 본 화재 사고로 설비의 운전 및 소재에 대한 피해를 규정하고, 이론에 의한 과학적인 정밀 조사를 실시하여 향후의 안전 운전을 위한 제안을 하고자 한다.