• 제목/요약/키워드: 유연 다물체 구조물

검색결과 12건 처리시간 0.028초

반디호 복합재 착륙장치의 착륙특성에 관한 해석

  • 최선우;박일경
    • 항공우주기술
    • /
    • 제4권2호
    • /
    • pp.15-20
    • /
    • 2005
  • 지금까지 착륙장치에 대한 다물체 동역학은 주로 구조물을 강체로 가정하여 지상하중 및 지상거동에 대해 활발한 연구가 진행되어 왔고, 실제 착륙장치 개발에 사용되고 있으나 강체 다물체 동역학에서는 구성품들을 대부분 강체로 가정하기 때문에 해석결과에 많은 오차가 포함될 수 있다. 특히 착륙장치 시스템의 경우 지상 충격시 3축 방향으로 매우 큰 하중이 발생하고 이로 말미암아 구조 변형이 크게 발생한다. 따라서 구조물을 강체 대신 실제에 보다 가까운 유연체로 모델링을 하는 유연 다물체 동역학 해석을 도입하면 보다 정확한 해석결과를 얻을 수 있다. 반면, 유연 다물체 동역학 해석을 실시하기 위해서는 동역학 모델 및 유한요소 모델 등을 준비하는데 상당한 시간과 기술이 요구된다. 본 연구에서는 반디호에 장착된 복합재 판스프링 착륙장치 구조물을 모델로 지상충격하중 및 동적거동을 예측할 수 있는 프로그램을 개발하였다.

  • PDF

두 개의 유연 링크로 이루어진 2차원 구조물의 동적 모델링 및 실험 (Dynamic Modeling of Planar System Consisting of Two Flexible Links and Experiment)

  • 최민섭;곽문규
    • 한국소음진동공학회논문집
    • /
    • 제26권7호
    • /
    • pp.865-874
    • /
    • 2016
  • This research is concerned with the experimental investigation on the vibrations of a flexible two-link system for verifying the theoretical result from simplified equations of motion for the system along with the kinematical synthesis are proposed to simulate the elastic vibrations of a previous study. The structure consists of flexible two-links; The link 2 is attached to the end of the link 1. The link 1 is made of composite fiber reinforced polymer and the link 2 is an aluminum beam. In order to verify the theoretical result, a flexible two-link system operated by the AC and RC servo motors was constructed. Experimental results show that the dynamic modeling approach and the kinematical synthesis proposed in this paper are effective.

유연 특성 항공기의 동적·정적 거동 분석을 위한 비행 동역학 시뮬레이션 프로그램 (Flight Dynamic Simulation Program for Analyzing Static and Dynamic Behaviors of Aircraft with Flexible Characteristics)

  • 진재현;백승길
    • 한국항공우주학회지
    • /
    • 제49권1호
    • /
    • pp.31-40
    • /
    • 2021
  • 현대의 항공기는 고성능이면서도 경량이다. 그래서 유연한 구조물의 특성이 나타나며 비행 성능에 영향을 미치거나 한계를 짓기도 한다. 이러한 유연 특성은 항공기 설계 초기 단계부터 분석이 필요한데, 이를 위해 유연 항공기의 동적·정적 거동을 분석할 수 있는 프로그램을 개발하였으며, 그 결과를 제시한다. 다물체 동역학 시뮬레이션 기법에 기반하여, 강체 비행 역학, 구조 진동 거동, 그리고 비정상 공기력 등을 세부 모듈로 개발하고 통합하였다. 마지막으로, 통합 시뮬레이션 프로그램을 이용하여 유연 특성 항공기의 등속 수평 비행과 선회비행을 분석하였다.

유연한 보 구조물 위를 이동하는 구속 기계계의 동력학 해석(II) : 응용 (Dynamic Analysis of Constrained Mechanical System Moving on a Flexible Beam Structure(II) : Application)

  • 박찬종;박태원
    • 한국정밀공학회지
    • /
    • 제17권11호
    • /
    • pp.176-184
    • /
    • 2000
  • Recently, it becomes a very important issue to consider the mechanical systems such as high-speed vehicle and railway train moving on a flexible beam structure. Using general approach proposed in the first part of this paper, it tis possible to predict planar motion of constrained mechanical system and elastic structure with various kinds of foundation supporting condition. Combined differential-algebraic equations of motion derived from both multibody dynamics theory and Finite Element Method can be analyzed numerically using generalized coordinate partitioning algorithm. To verify the validity of this approach, results from simply supported elastic beam subjected to a moving load are compared with exact solution from a reference. Finally, parameter study is conducted for a moving vehicle model on a simply supported 3-span bridge.

  • PDF

컨테이너 하역작업 시 갠트리 크레인의 유연다물체 동역학 모델링 및 윤하중 해석 (Multi-flexible Dynamic Modeling and Wheel Load Analysis of a Rubber Tired Gantry Crane in Container Cargo Working)

  • 김정윤;김진곤
    • 한국전산구조공학회논문집
    • /
    • 제27권5호
    • /
    • pp.379-384
    • /
    • 2014
  • 본 논문은 갠트리 크레인의 설계를 위해 컨테이너 하역작업 시 특정하중 조건하의 RTGC(Rubber Tired Gantry Crane)의 동적거동과 그에 따른 윤하중을 분석한 내용을 기술하고 있다. 먼저 RTGC의 동적거동을 살펴보기 위해 거대 구조물인 크레인의 유한요소 모델을 개발하고 고유진동수와 고유모드의 모달시험결과를 이용하여 유한요소모델을 검증하였다. RTGC의 기타 부속품은 3차원 CAD모델링을 통해 다물체 동역학해석 소프트웨어인 ADAMS에서 강체로 모델링하였다. 본 연구에서 하중 조건은 일반적인 컨테이너의 이송조건(OP1)과 외부부하조건 없이 단순히 트롤리를 이용하여 컨테이너를 하역하는 2가지 경우로 고려하였다. 해석 결과 RTGC의 컨테이너 작업 시 발생하는 크레인의 진동은 거대 구조물의 강성과 변형에 주로 기인함을 확인하였으며 이러한 크레인의 진동은 RTGC의 움직임을 발생시켜 컨테이너 하역작업 불능 등의 거동을 발생시킬 수 있음을 분석할 수 있었다.

인공위성과 가변속 제어모멘트자이로의 상호작용 모델링 및 해석 (Modeling and Analysis of Interactions Between A Satellite and Variable-Speed Control Moment Gyros)

  • 진재현;이현재
    • 항공우주시스템공학회지
    • /
    • 제12권1호
    • /
    • pp.17-26
    • /
    • 2018
  • 다물체 동역학 기법을 이용하여 가변속 제어모멘트자이로와 인공위성의 상호작용하는 모델을 개발한 연구결과를 소개한다. 이 상호작용 모델을 이용하여, VCMG 모터의 사양 설계와 위성 구조물의 강도설계에 활용할 수 있는 데이터를 얻었다. 그리고 태양 전지판과 같은 유연 모듈의 상호작용 효과도 포함하였다. 위성의 기동에 의하여 유연 모드가 야기되고, 이 모드의 진동에 의하여 위성 자세에 변동이 가해진다. 모델리카 언어로 시뮬레이션 프로그램을 개발하고, 제시한 모델의 타당성을 검증하였다.

유연 회전축의 다물체 동역학 모델링 및 위상 조절법을 이용한 진동 제어 (Multi-Body Dynamic Modeling for a Flexible Rotor and Vibration Control using a Novel Phase Adjusting Technique)

  • 정훈형;조현민;김재실;조수용
    • 한국기계가공학회지
    • /
    • 제10권1호
    • /
    • pp.87-92
    • /
    • 2011
  • This article proposes a new technique of the dynamic model using multi-body dynamic analysis tool for a flexible main spindle rotor system with a novel phase adjusting control technique for the purpose of an active control of rotor vibration. The dynamic model is used as a plant model. Also in order to make control system, a component parameters and phase controller is composed and simulated by SIMULINK. The vibration is reduced to 50%. Therefore the ADAMS dynamic model for the flexible main spindle rotor and the phase adjusting control techniques may be effective for the suppressing the vibration and helpful for the future active control for rotor vibration.

유연한 보 구조물 위를 이동하는 구속 기계계의 동력학 해석(I) : 일반적인 접근법 (Dynamic Analysis of Constrained Mechanical System Moving on a Flexible Beam Structure(I) : General Approach)

  • 박찬종;박태원
    • 한국정밀공학회지
    • /
    • 제17권11호
    • /
    • pp.165-175
    • /
    • 2000
  • In recent years, it becomes a very important issue to consider the mechanical systems such as high-speed vehicles and railway trains moving on elastic beam structures. In this paper, a general approach, which can predict the dynamic behavior of constrained mechanical system and elastic beam structure, is proposed. Also, various supporting conditions of a foundation support are considered for the elastic beam structures. The elastic structure is assumed to be a nonuniform and linear Bernoulli-Euler beam with proportional damping effect. Combined Differential-Algebraic Equations of motion are derived using multibody dynamics theory and Finite Element Method. The proposed equations of motion can be solved numerically using generalizd coordinate partitioning method and Predictor-Corrector algorithm, which is an implicit multi-step integration method.

  • PDF

위성 기동 시 SAR 안테나 반사판에 발생하는 진동 분석 (Vibration Analysis of SAR Antenna Reflectors During Satellite Maneuver)

  • 김태현;김대연;서종은;한재흥;이재은;정화영
    • 한국항공우주학회지
    • /
    • 제48권3호
    • /
    • pp.225-231
    • /
    • 2020
  • 기상 조건과 상관없이 영상을 획득할 수 있는 SAR 위성에 대한 수요가 최근 들어 계속해서 증가하고 있다. 일반적으로 SAR 안테나의 주반사판은 제한적인 탑재체의 공간에 효율적으로 수납하기 위해 여러 개의 전개 가능한 패널로 구성된다. 전개형 구조물은 본질적으로 구조적 강성이 부족하며 외란이나 가진에 취약하다. 특히, SAR 위성은 더 높은 각속도 요구조건 때문에 안테나 반사면에 발생하는 진동 수준이 높을 수 있다. 이미지를 얻는 동안 이미지의 품질을 위해 반사판의 높은 표면 정확도를 유지하는 것은 중요하다. 본 연구에서는 전개형 SAR 안테나의 구조적 변형 때문에 발생하는 성능 저하를 분석한다. 주반사판의 패널은 유연 구조물로 가정하였으며, 다물체 동역학 시뮬레이션 환경을 구축하였다. 이를 통해, 위성의 기동 시 패널의 변형량을 계산한다. 또, 이러한 변형이 안테나 성능과 임무 수행에 얼마나 영향을 미치는지 확인하기 위해, 안테나 이득 및 빔 지향오차를 분석하였다.

RecurDyn 을 이용한 압축기 및 배관 진동 해석 (Vibration Analysis of Compressor and Pipe Using RecurDyn)

  • 권승민;손영부;하종훈;유홍희
    • 대한기계학회논문집 C: 기술과 교육
    • /
    • 제3권2호
    • /
    • pp.117-124
    • /
    • 2015
  • 최근 생활수준의 향상으로 인해 가정용 에어컨의 보급률이 꾸준히 증가함에 따라 품질에 대한 소비자의 눈높이 또한 점점 높아지고 있다. 과거에 소비자의 요구는 제품의 효율성에 집중되었지만 점차 저진동/저소음에 대한 부분으로 확장되고 있다. 에어컨의 압축기는 제품의 효율을 결정하는 주요한 부분이면서 동시에 진동/소음의 주된 원인을 제공하고 있다. 압축기에서 발생한 진동/소음은 압축기 케이스와 배관을 통해 주위 구조물로 전달되고 이들은 다시 구조기인 소음이나 2 차적인 진동을 유발하게 된다. 본 연구에서는 RecurDyn 을 이용해 압축기의 진동/소음에 영향을 미치는 모터의 가진력이 고려된 MFBD(Multi Flexible Body Dynamics) 해석 모델을 개발하였다. 개발된 모델을 이용하여 압축기의 진동/소음 특성을 조사하고 압축기에서 발생하는 진동을 계산하여 실험 결과와 비교하였다.