• 항공우주기술
• /
• 제4권2호
• /
• pp.21-26
• /
• 2005

전기체 구조시험 및 일반적인 구조시험과 관련된 시험장비는 유압 작동기를 제어하는 제어장치와 스트레인게이지 및 관련센서의 데이터를 수집할 수 있는 데이터 획득 장치로 구분될 수 있다. 비행체 구조 시험은 많은 수의 제어채널 및 데이터 획득 채널이 요구되며 채널 수의 증가에 따른 하드웨어의 자원도 많이 소요된다. 특히 많은 수의 제어채널을 가진 구조시험을 수행하여 오면서 하드웨어의 문제점들이 조금씩 나타나는 현상을 발견 할 수 있었는데 대부분의 경우 시험 장비의 교정 확인 방법을 통해서 해결할 수 있었다. 본 논문에서는 비행체 구조시험 장비(MTS Aero90)의 서보 제어 장치중의 일부인 다기능 입출력 프로세서(Multifunction Input Output Processor)와 로드셀 신호처리 보드(497.22 Dual DC Conditioner)에 대한 교정 확인 방법에 대하여 기술하였다.

• 한국항공우주학회지
• /
• 제38권3호
• /
• pp.249-257
• /
• 2010

가스터빈 엔진의 경우 디지털식 엔진제어장치 (FADEC)가 기존의 유압기계 및 전자식 제어기를 빠른 속도로 대체하고 있다. 하지만 헬리콥터 등 고성능 시스템을 대상으로 한 엔진 제어기의 경우 제어기를 설계하는 절차를 설정하는 과정이 잘 알려져 있지 않다. 본 논문에서는 충실도가 높은 헬리콥터 및 엔진 시뮬레이션 환경을 구성하고 이를 이용하여 시스템을 해석하고 설계자료를 추출할 수 있는 방안을 제시한다. 여기서는 이러한 방법을 기존의 헬리콥터 엔진을 대상으로 한 제어기의 선보상 스케줄을 작성하는데 사용하였으며, 그 결과 기존의 알고리듬과 동등하거나 우수한 조속 성능을 확인할 수 있었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.62-67
• /
• 2001

The textiles supply rolling equipment is a part of inspection machine which inspect finished textiles and it check up textiles through rolling hydraulic equipment. This study suggests a method to select the capacity and initial gas pressure of accumulator to control reducing speed of the hydraulic motor to a desired degree. An accumulator in hydraulic systems is hydraulic machinery which stores kinetic energy of inertia body during braking. A series of computer simulations were done for the brake action and the selection method was based upon a trial and error approach. The results of the simulation work were compared with those of experiments and these results show that the proposed method can be applied effectively to control reducing speed of the hydraulic motor when braking action in textiles rolling system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1139-1143
• /
• 2003

HILS(Hardware-In-the-Loop Simulation) is a scheme that incorporates hardware components of primary concern in the numerical simulation environment. Due to its advantages over actual vehicle test and pure simulation, HILS is being widely accepted in automotive industries as test benches for vehicle control units. Developed in this study is a HILS system for EHB(Electro-Hydraulic Brake) systems that include a high pressure generator and a valve control system that independently modulates the brake pressures at four wheels. An EHB control logic was tested in the HILS system. Test results under various driving conditions are presented and compared with the VDC logic.

• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.192-201
• /
• 1997

The feedback control scheme of the pressure control system of the rear wheel steering gear which has relatively large volume and sprung load was built up in order to improve th response characteristic of the system. The control algorithm chosen was a feedback compensator joined by a feedfoward compensator and the model matching method was used in the process of control system design. The structures and properties of the reference models were inspected and the parameters of the controller were decided. The improvement of the response characteristic of the pressure control valve by means of the feedback control is affirmed. Particularly, when the order of the system model is higher than the 2nd order, the effectiveness of the feedback control on the improvement of the response characteristic of the valve is distinct. And the convenience of the model matching method is the process of control system design is confirmed as well.

• 한국정밀공학회지
• /
• 제13권8호
• /
• pp.120-127
• /
• 1996

Anti-lock Brake System has been developed to reduce tendency for wheel lock and improve vehicle control during sudden braking on slippery road surfaces. This is achieved by controlling the braking pressure, avoiding wheel lock, while retaining handling and brake performance. This paper is concerned about pressurecharacteristics of hydraulic modulator. Experimental sets which is consists of hydraulic modulator, duty controller, pressure regulator, pressure senset is consuructed. System modelling and computer simulation are performed for comparison with experimental results. Brake wheel pressure are measured under various driving pulse. The result of experiment show fairly agreement with the simulation. As a result, it is known that wheel pressure is affected by duty ratio, orifice diameter through computer simulation.

• 한국소음진동공학회논문집
• /
• 제16권11호
• /
• pp.1165-1171
• /
• 2006

This paper presents a new type of jetting dispenser for the integrated circuit (IC) fabrication and surface mount technology The proposed system is featured by the piezoelectric actuator and hydraulic magnification device. After describing structural component of the dispensing mechanism and its operation principle, both the fluid modeling and the hydraulic magnification modeling are undertaken with a lumped-parameter method based on the analogy of the fluid system and mechanical system. A mathematical governing equation is then derived by integrating the fluid model with the mechanical model of the driving piston and piezoelectric actuator. Subsequently, in order to achieve a desired dispensing amount, control algorithm adjusting duty cycle of the driving voltage is synthesized and control responses are presented in time domain.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.428-433
• /
• 2006

This paper presents a new type of jetting dispenser for the integrated circuit(IC) fabrication and surface mount technology. The proposed system is featured by the piezoelectric actuator and hydraulic magnification device. After describing structural component of the dispensing mechanism and its operation principle, both the fluid modeling and the hydraulic magnification modeling are undertaken with a lumped-parameter method based on the analogy of the fluid system and mechanical system. A mathematical governing equation is then derived by integrating the fluid model with the mechanical model of the driving piston and piezoelectric actuator. Subsequently, in order to achieve a desired dispensing amount, control algorithm adjusting duty cycle of the driving voltage is synthesized and control responses are presented in time domain.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.614-617
• /
• 1995

The unbalance heavy-load elevation driving systems are composed of rotating link-mechanism and hydraulic cylinder which actuates elevation and compensates the static unbalance moment of supporting mechanism. Control and compensation of gun driving is very difficult because these mechanism imply highly nonlinearities due to hydraulic fluid characteristics and mechanical rotation of link-mechanism. In this study, through the analysis of manufactured link-mechanism, the optimal link-mechanism design of the elevating system is suggested. Also to estimate the control performance of the unbalance heavy-load elevation servo-control driving system, modeling and simulation of the system are carried out. To prove the reliability of performance estimation program,simulation results are compared with the experimental results. Both results are similar, therefore this program will be helpful to study the control performance improvement of the system.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 춘계학술논문집 2부
• /
• pp.954-957
• /
• 2011

본 논문은 기존의 샌드 드레인 시공장비의 베이스 머신인 기중기 대신에 포크레인을 이용하여 샌드 드레인 시공 장비를 개발 하였다. 그리고 세부적인 기술 개발 사항으로 전기적 타설의 방식에서 유압 타설을 통한 작업 효율 연비 향상과 구조해석을 통한 장비의 무게의 경량화를 이루었다. 그리고 리더의 각도 조절을 통하여 작업의 향상을 도모 할 수 있는 각도 조절 장치와 타설 작업의 자동 모니터링과 제어를 할 수 있는 자동제어 시스템을 개발 하였다.