• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.758-763
• /
• 2009

본 연구에서는 여주 외 5개 지점에서 유사 이동이 활발한 시기인 홍수기 및 저 평수기(홍수전 후)에 부유사와 하상토를 측정하고 이를 통해 유사량 특성을 파악하였다. 시료분석은 그 목적에 따라 여과법, BW관법, 체분석법으로 $Od{\acute{e}}n$ Curve와 입도분포곡선 등을 작성하여 총유사량 추정시 이용하였다. 또한 총유사량을 추정하는 데 있어 에너지 개념을 이용한 Ackers & White(1973년), Engelund & Hansen(1967년), Yang(1973년, 1979년)의 방법과 확산-이송 개념의 Modified Einstein(1955년) 방법을 적용하였다. 연구결과, 유량-부유사농도, 부유사량, 총유사량 관계에 있어 동일 유량에 대한 변동성과 추정방법에 따른 총유사량의 상충을 볼 수 있었다. 이는 강우사상별 특성 및 하천의 수리 및 유사특성에 따른 원인과 추정방법에 대한 서로 다른 제한된 범위의 자료들을 적용한 데에서 오는 오류로 판단된다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.4
• /
• pp.679-686
• /
• 1997

In order to investigate the distribution characteristics of polychlorinated Biphenyls (PCBs) at the southern of Korean East Sea, vertical measurements of temperature, salinity, DO and PCBs were performed by each depth of 5 stations during August - October 1996. Thermocline and salinocline were generally existed at depth of 30 m and water mass current of midwater in the southern of Korean East Sea was distributed below 30 m depth. The distribution of surface water mass in this area was extended to Tsusima area from the southern offshore of the Korean last Sea. In August 1996, concentration range of PCBs had $0.22\~0.36\;ng/\ell$ at surface layer and their concentrations at near Tsusima offshore were relatively decreased. Total mean concentration of PCBs was $0.29\;ng/\ell$ in the sea surface and $0.31\;ng/\ell$ in the middle layer. PCBs seemed to correlate well with suspended particles. And vortical and horizontal distribution of their concentrations showed comparatively uniform pattern. Relatively high compositional ratio of Di- and Tri-PCBs could be found at the sea surface, while compositional ratio of Penta-PCBs dominates over other congener at deep layer.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.4
• /
• pp.294-299
• /
• 2009

To investigate the pollution levels and behavior of PCDD/Fs in ambient air, gaseous and particulate phase concentrations were measured at Cheongju city in 2008. The samples were collected at 3 sites (industrial, residential/commercial and rural region) by season (winter, spring and summer). The concentrations and TEQ concentrations of PCDD/DFs ranged from 0.73 to 2.43 pg/$m^3$ and from 0.007 to 0.122 pg TEQ/$m^3$, respectively. These levels were similar or lower than that of other domestic researches (from n.d. to 2.149 pg TEQ/$m^3$). The concentration of PCDD/Fs in particulate phase (from 54% to 98% against total concentration) were higher than that of gas phase. As a results of comparison of congener patterns and statistical analysis, PCDD/Fs was mainly influenced by a combustion process in ambient air, Cheongju city.

• The Korean Journal of Ecology
• /
• v.23 no.3
• /
• pp.281-291
• /
• 2000

The objectives of this study were to classify quantitatively vegetational types of P. densiflora for. erecta forest. The results were summarized as follows. 1) According to the canonical correspondence analysis(CCA), variables such as topography, altitude, available P/sub 2/O/sub 5/, and Mg/sup 2＋/were highly correlated on three axes. Based on the correlations between vegetation units and environmental factors, Rhododendron micranthum community tended to be more distributed in the such situations of high altitude, upper topography, high C/N ratio, low level of Mg/sup 2＋/and Ca/sup 2＋/. Vaccinium koreanum community tended to be more distributed in the such conditions of high altitude, upper topography, high level of Ca/sup 2＋/and Ma/sup 2＋/. 2) According to the results of importance value analysis, Tree layer and Subtree layer in study areas showed high Ⅳ along with P. densiflora for. erecta, Quercus mongonlica, Q. variabilis, Q. serrata, Fraxinus rhychophylla and shrub layer indicated that Ⅳ of P. densiflora for, erecta in Sokwang-ri area was higher than those of the other areas. Therefore, it was considered that P. densiflora for. erecta forest of Sokwang-ri area could be naturally regenerated. 3) According to results of species diversity, the species diversity of Uljin region showed the least low value as 0.6622, other regions appeared about 0.7. In the diversity by vegetation types, Acer pseudosieboldianum community showed high value. 4) According to the analysis of community similarity, Sokwang-Ri region was lowly correlated with Uljin region, while the index among the other areas appeared above 0.6. 5) According to the analysis of interspecific association, it was divided into 2 groups. The species of first group were mainly involved in character species, and the species of second group were involved in differential species groups.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.10
• /
• pp.41-48
• /
• 2010

In this study, grain size distribution of dredged soil and suspended solid distribution of supernatant in containment area were measured and compared with design prediction for suitability evaluation on prediction of suspended solid concentration of supernatant in conventional design of containment area. In addition to that, relationship were also analyzed between current velocity and suspended solid concentration of supernatant. Evaluation results show a relatively good agreement between field measurement and design prediction. On contrast, field measurement and design prediction show a quite different value each other in the early stage of dredging or at a point that current velocity increases. It is believed that this is due to that conventional design method of containment area does not account for ponding depth and current velocity which change sensitively with dredging period. Since current velocity and distribution of suspended solid concentration measured simultaneously show a similar trend, it is observed that there exists a close relationship between current velocity and distribution of suspended solid concentration. Therefore, a new design method for containment area, which can consider sedimentation of suspended solid that changes with interface height of dredged soil, ponding depth, current speed of supernatant, is necessary in order to predict the situation change of containment area more precisely.

• Analytical Science and Technology
• /
• v.29 no.6
• /
• pp.293-299
• /
• 2016

$^{137}Cs$ was investigated in river bottom sediments located in South-Han River basin and it was compared with international case studies to estimate the concentration level of $^{137}Cs$ in river sediment of Korea. The obtained values of $^{137}Cs$ which was analyzed by gamma-ray spectrometry were in the range of <$MDA{\sim}3.80{\pm}0.14Bq/kg{\cdot}dry$ and similar to the $^{137}Cs$ activities in soil of Korea. According to international case studies, $^{137}Cs$ activities were between 3.7 to $15,396Bq/kg{\cdot}dry$, when pollutants such as nuclear power plant accidents and radiation leaks were present near the rivers. The $^{137}Cs$ activities showed a variety of distribution depending on the country, when pollution occurs and survey time. Also, $^{137}Cs$ activities of river sediments without pollution sources were mostly less than $10Bq/kg{\cdot}dry$ in other countries. It was comparable with the obtained $^{137}Cs$ activities in this study. The obtained values provide useful information on the background concentration of $^{137}Cs$ in river sediment and will be able to use a basis for determining contamination of $^{137}Cs$ in the river.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.92-92
• /
• 2017

본 연구에서는 수치모델을 이용하여 대하천서 발생되는 조류의 공간적 농도 분포를 예측하였고, 현장실험을 통해 모델을 검증하였다. 국내하천은 다수의 지류가 본류로 유입됨에 따라 오염물질의 생산과 공급이 지속적으로 발생하고, 하천의 유로연장과 하폭에 비해 수심이 낮은 지형학적 특성을 지닌다. 따라서 지류 유입 이후 발생되는 조류의 거동 특성을 분석하기 위해 수심 적분된 2차원 이송-확산 모델을 사용하였다. 광합성 성장을 이루는 조류의 성장속도 계산을 위해 영양염류, 수온, 일사량과 수심 등을 변수로 하는 성장속도 함수들을 위의 모델과 결합하였다. 본 연구의 대상구간은 낙동강과 금호강 합류부를 포함한 강정고령보 하류 약 9.2 km 구간으로 모델 검증을 위한 현장실험을 수행하였다. 2차원 이송-확산 모델의 입력 값인 유속 및 수심을 계산하는 수리동역학 모델 검증을 위해 미국 Sontek사의 M9을 이용하여 낙동강과 금호강 각각 32개, 12개 측선에 대하여 수리량을 측정하였다. 수리량 측정결과, 금호강과 낙동강의 평균 유량은 각각 $240m^3/s$, $60m^3/s$로 측정되었고 측정된 유량을 모델의 상류단 경계조건으로 사용하여 측정 유속 및 수심과 유사한 결과를 모델로부터 취득할 수 있었다. 조류 농도 측정을 위해 독일 bbe사의 AlgaeTorch 10을 사용하였으며, 수리량 측정과 동일한 측선서 총 조류 세포수(cells/ml)를 측정하였다. 농도 측정결과, 하류로 내려감에 따라 조류의 농도가 증가하는 경향이 나타났고 금호강 합류 후 최대농도는 측정구간 최하류 우안서 4,460 cells/ml로 나타났다. 주 흐름이 발생하는 하천 중앙부에 비해 유속이 느린 하안서 상대적으로 높은 농도가 측정되었으며, 이와 같은 경향은 하류로 내려감에 따라 강하게 나타났다. 측정된 조류 농도를 이용한 2차원 이송-확산 모델 검증결과, 합류부 최상류 측선서 MAPE = 10.5 %의 최대오차가 발생하였고 최하류 측선서 MAPE = 6.7 %의 최소오차가 발생하였다. 인과 질소와 같은 영양염류의 농도가 높고 횡 방향 수온 분포가 균일한 대상구간의 특성상 영양염류 함수와 수온 함수로부터 계산된 성장속도 가중치 범위는 각각 0.8~1.0, 0.91~1.09로 공간적 변동성이 크게 나타나지 않은 반면, 수심을 변수로 하는 일사량 함수의 성장속도 가중치 범위는 0.05~1.00으로 상대적으로 매우 높은 공간적 변동성이 나타났다. 수심이 4 m 이하인 하천 양안서 0.8 이상의 가중치가 나타났으며, 수심이 7 m 이상인 하천 중앙서 0.4 이하의 가중치가 나타났다. 본 연구의 수치모의 결과, 수리동역학 모델로부터 계산된 수심이 모델 결과 값에 큰 영향을 미치는 것으로 판단된다.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.9
• /
• pp.870-878
• /
• 2010

We investigated the concentration and the sources of ubiquitous persistent organic pollutants [i.e., 17 toxic polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), 12 coplanar polychlorinated biphenyls (Co-PCBs), and 16 priority polycyclic aromatic hydrocarbons (PAHs)] in waste papers and lumbers from industrial complexes. The total concentrations in waste papers and lumbers ranged from 9.69~176.77 pg/g-dry and 0.14~0.25 pg/g-dry for 17 PCDD/Fs, 109.95~4097.25 pg/g-dry and 28.23~59.88 pg/g-dry for 12 Co-PCBs and 9.30~52.18 ng/g-dry and 0.82~1.82 ng/g-dry for 16 PAHs respectively. Generally, the concentration of these pollutants in waste papers was higher than those in waste lumbers. OCDD was dominant in waste papers and lumbers and the PCDD/F patterns of these samples were similar with that of stack gas. The distribution patterns of Co-PCBs in wastes were related with commercial PCB products, indicating the effect of commercial PCB products on ubiquitous environment. The diagnostic ratios of several PAH compounds in waste paper showed that they were related with pyrogenic sources.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2403-2408
• /
• 2013

This paper has analyzed the change of forward and backward current for channel doping concentration to analyze off-current of double gate(DG) MOSFET. The Gaussian function as channel doping distribution has been used to compare with experimental ones, and the two dimensional analytical potential distribution model derived from Poisson's equation has been used to analyze the off-current. The off-current has been analyzed for the change of projected range and standard projected range of Gaussian function with device parameters such as channel length, channel thickness, gate oxide thickness and channel doping concentration. As a result, this research shows the off-current has greatly influenced on forward and backward current for device parameters, especially for the shape of Gaussian function for channel doping concentration.

• Analytical Science and Technology
• /
• v.16 no.2
• /
• pp.143-151
• /
• 2003

In the present study, we made measurements of PM-bound metal concentrations from seven different urbanized locations in Seoul for the period covering March 2001 through May 2002. The measurement data were analyzed to explore the possible influences of spatial factors on metal distribution characteristics. To check for the importance of such aspects on metal distribution characteristics, the measured data were compared between different metals and between different sites by several criteria including (1) coefficient of variation (CV) values; (2) temporal variability; and (3) the abundance of strongly correlated pairs. The overall results of our study indicate strong diversity in the distribution characteristics of different metals. It is found that some metals (like Fe, Mn, and Pb) tend to exhibit strong compatibility among different study sites. However, no such compatibility appears to exist for certain metals like Cu. To account for the importance of spatial factors, complex relationships between source/sink processes and geochemical characteristics of a given metallic component may have to be examined in a systematic manner.