• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.11
• /
• pp.886-890
• /
• 2010

The polytetrafluoroethylene (PTFE) films are deposited on glass using conventional rf-magnetron sputtering method. Their hydrophobic properties are investigated for application as an anti-fouling coating layer on the screen of displays. It is found that the hydrophobicity of PTFE films largely depends on the sputtering conditions, such as Ar gas flow and deposition time during sputtering process. These conditions are closely related to the deposition rate or thickness of PTFE film. Thus, it is also found that the deposition rate or the film thickness affects sensitively the geometrical morphology formed on surface of the rf-spluttered PTFE films. In particular, the PTFE film with 1950 nm thickness deposited for 30 minute at rf-power 50 W shows a very excellent optical transmittance of over 90% and a good anti-fouling property and a good durability.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.5
• /
• pp.381-386
• /
• 2012

To study encapsulation method for large-area organic light emitting diodes (OLEDs), red emitting OLEDs were fabricated, on which $Alq_3$ as organic buffer layer and LiF and Al as inorganic protective layers were deposited to protect the damage of OLED by epoxy. And then the OLEDs were attached to flat glass by printing method using epoxy. The basic structure of OLED doped with rubrene of 1 vol.% as emitting layer is ITO(150 nm) / 2-TNATA(50 nm) / ${\alpha}$-NPD(30 nm) / $Alq_3$:Rubrene(30 nm) / $Alq_3$(30 nm) / LiF(0.7 nm) / Al(100 nm). In case of depositing $Alq_3$, LiF and Al and then attaching of flat glass onto OLED, current density, luminance, efficiency and driving voltage were not changed and lifetime was increased according to thickness of Al as inorganic protective layers. The lifetime of OLED/$Alq_3$/LiF/Al_4/glass structure was 139 hours increased by 15.8 times more than bare OLED of 8.8 hours and 1.6 times more than edge sealed OLED of 54.5 hours.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2119_2120
• /
• 2009

전압을 인가하였을 때 전계방향에 의해 가역적으로 색이 변화하는 현상을 전기변색(electrochromism)이라고 한다. 이러한 전기채색현상을 보이는 물질을 전기채색물질(electrochromism materials)이라고 하며, 전기채색 물질에 의한 소자를 전기채색소자(electrochromism device : ECD)라고 한다. 전기채색현상은 투과율(transmittance), 반사율(reflectance)의 가역적이며 가시적인 변화이고, 전기화학적인 산화환원 반응과 관련이 있다. 따라서 본 연구에서는 Titanate nanotube(TNT)를 제조하고 전기변색소자(ECD)에 응용하였다. SEM, XRD, UV-Vis등을 이용하여 재료학적 분석을 시행하였으며, 전기화학적 테스트로 cyclic voltammetry를 측정 하였다. 그 결과 TNT 분말은 직경 약 20~30 nm, 길이 약 500~600 nm 의 입자형상을 나타내었으며, X-선 회절시험결과 $H_2Ti_2O_5{\cdot}H_2O$의 층상구조를 나타내었다. 제조된 막은 FTO glass 위에 PEI/(TNT/TBAOH)$_{n-1}$/PDDA의 순으로 코팅되었다. 전기화학적 테스트를 위하여 2전극 시스템을 제작하였으며, 여러 종류의 액체 전해질을 제작하여 cycle voltammetry를 시행하였다. 그 결과, 각각의 전해질에서 "-"영역의 산화환원전위 피크가 뚜렷하게 나타났으며, 짙은 갈색으로의 채색현상을 나타냈다. 본 연구의 결과로서 TNT 박막을 이용한 ECD은 광조절 유리로서 뿐만 아니라, 여러 전기채색 디바이스에 응용될 것으로 사료된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.151-151
• /
• 2013

최근 반도체 및 디스플레이 산업에서의 플라즈마 공정의 중요성은 점점 증대되고 있다. 특히, 반도체/LCD 제조공정에서의 Dry Etch공정은 디스플레이용 유리 위에 형성된 산화막, 금속입자, 박막, 및 Polymer와 같은 불순물들을 플라즈마를 이용하여 제거하는 공정이다. 플라즈마 공정을 진행하는 동안 몇 가지 문제점들이 이슈가 되고 있다. Etch공정에서는 활성 부식가스를 많이 사용하고 장시간 플라즈마에 노출되기 때문에, 진공부품들은 플라즈마에 의해서 물리적인 이온충격(Ion Bombardment)과 화학적인 Radical 반응에 의한 부식이 진행된다. 부식영향에 의해 챔버를 구성하고 있는 부품에서 균열이 발생하거나 오염입자들이 떨어져 나오게 된다. 발생한 오염입자들은 산업용 플라즈마 공정에서 매우 심각한 문제가 되고 있다. 본 연구에서는 산화막의 부식 저항특성을 측정할 수 있는 평가방법에 대하여 고찰하였고, 표준화된 데이터로 비교분석할 수 있도록 평가기준과 규정화된 피막평가방법을 연구하였다. 또한, 산화막의 특성에 따른 플라즈마 상태, 오염입자 발생 등 플라즈마 공정을 진단하여 부품재료의 수명을 예측하고, 신뢰성 있는 평가방법에 관한 연구를 하였다.

• Korean Journal of Materials Research
• /
• v.14 no.11
• /
• pp.780-785
• /
• 2004

The degradation mechanism of soft magnetic properties of $Fe-Hf-N/Cr/SiO_2$ thin films reacted with a bonding glass was investigated. When $Fe-Hf-N/Cr/SiO_2$ films were annealed under $600^{\circ}C$ without the bonding glass, the compositions and the soft magnetic properties of Fe-Hf-N layers were not changed. However, after reaction with the bonding glass at $550^{\circ}C$, the soft magnetic properties of the film were degraded. At $600^{\circ}C$, the saturation magnetization of the reacted film decreased to 13.5 kG, and its coercivity increased to 4 Oe, and its effective permeability decreased to 700. It was founded that O diffused from the glass into the Fe-Hf-N layers during the reaction and generated $HfO_2$ phases. It was considered that the soft magnetic properties of the $Fe-Hf-N/Cr/SiO_2$ films reacted with the bonding glass were primarily degraded by the formation of the Fe-Hf-O-N layer of which the Fe content was below 60 $at\%$, and secondarily degraded by the Fe-Hf-O-N layer above 70 $at\%$.

• Electrical & Electronic Materials
• /
• v.7 no.2
• /
• pp.100-106
• /
• 1994

A bilayer film consisting of a layer of a-Se$_{75}$ Ge$_{25}$ with a surface layer of silver -100[.angs.] thick and a monolayer film of a-Se$_{75}$ Ge$_{25}$ are irradiated with 9[keV] Ga$^{+}$ ion beam. The Ga$^{+}$ ion (10$^{16}$ [ions/cm$^{2}$] exposed a-Se$_{75}$ Ge$_{25}$ and Ag/a-Se$_{75}$ Ge$_{25}$ thin films show an increase in optical absorption, and the absorption edge on irradiation with shifts toward longer wavelength. The shift toward longer wavelength called a "darkening effect" is observed also in film exposure to optical radiation(4.5*10$^{20}$ [photons/cm$^{2}$]). The 0.3[eV] edge shift for ion irradiation films is about twice to that obtained on irradiation with photons. These large changes are primarily due to structural changes, which lead to high etch selectivity and high sensitivity.

• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.57-62
• /
• 1995

The coating condition of reproducible anti-reflective coating film and the light transmittance characteristics of the prepared anti-reflective coating glass were investigated as a study for the preparation of single-layer anti-reflective coating glasss. In case of coating with the sol in which the solvent was substituted with the ethanol with the addition of 0.1 mol HNO3, the coated glass showed the minimum value of the refractive index of 1.464, light transmittance of 94.2% at 550nm standard wavelength which is 3.2% higher than that of the parent glass, and the reflectance in the entire wave range of visible light. The refractive index represented its minimum at the sol concentration of 1.0 mol per 100mols of water and the higher the sol concentration, the higher the refractive index, resulting in the decrease of the light transmitance. The production condition of the reproducible anti-reflective coating on glass with the maximum transmittance of 94.2% was 4cm/min of withdrawal speed, 40$0^{\circ}C$ and 1 hour of heat treatment temperature and time, resulting in the film thickness of 94nm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.11
• /
• pp.905-910
• /
• 2011

To study encapsulation method for large-area organic light emitting diodes (OLEDs), red emitting OLEDs were fabricated, on which LiF and Al were deposited as inorganic protective films. And then the OLED was attached to flat glass by printing method using epoxy. In case of direct coating of epoxy onto OLED by printing method, luminance and current efficiency were remarkably decreased because of the damage to the OLED by epoxy. In case of depositing LiF and Al as inorganic protective films and then coating of epoxy onto OLED, luminance and current efficiency were not changed. OLED lifetime was more increased through inorganic protective films between OLED and flat glass than that without any encapsulation (8.8 h), i.e., 47 (LiF/Al/epoxy/glass), 62 (LiF/Al/LiF/epoxy/glass), and 84 h (LiF/Al/Al/epoxy/glass). The characteristics of OLED encapsulated with inorganic protective films (attached to flat glass) showed the possibility of application of protective films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.88-88
• /
• 2008

In this study, effect of thickness on structural, electrical and optical properties of B doped ZnO:Ga (GZOB) films was investigated. GZOB films were deposited on glass substrates by DC magnetron sputtering. The thickness range of films were from 100 nm to 600 nm to identified as increasing thickness, stress between substrate and GZOB film. The average transmittance of the films was over 80 % until 500 nm. Then a resistivity of $9.16\times10^{-4}\Omega$-cm was obtained. We presented that a GZOB film of 400 nm was optimization to obtain a high transmittance and conductivity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.5
• /
• pp.279-283
• /
• 2016

In this study, we intended to achieve both antibacterial properties and electromagnetic shielding using the Al-doped ZnO (AZO) films. FTS (Facial Target Sputtering) magnetron sputtering was used for the AZO thin films instead of the conventional RF sputtering because the FTS sputtering could avoid the damage for the plasma as well as fabrication of thin films with a high quality. The 300-nm thick AZO thin films grown on glass substrate showed a resistivity of about $7{\times}10^{-4}{\Omega}-cm$ and a transmittance of about 90% at a wavelength of 550 nm. AZO thin films were investigated for the electromagnetic shielding effectiveness measured by 2-port network method at 1.5 ~ 3 GHz. The AZO (300 nm)/glass films showed an EMI shielding effectiveness of approximately 27 dB. An antibacterial effect was measured by the film attachment method (JIS Z 2801). The percent reductions of bacteria by AZO films were 99.99668% and 99.99999% against Staphylococcus aureus and Escherichia coli, respectively.