• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2005.11a
• /
• pp.291-294
• /
• 2005

Precast Concrete apartments were main stream of domestic industrialized housing around 90's , and Steel Houses applying Steel Stud technique with light weighted steel have been dominant portion since 1995. On the other hand, various building techniques including Steel Stud method and highly prefabricated and industrialized Unit method are prevailing in developed countries like Japan. Steel Stud and Unit Box have their own merits and demerits, but the more crucial aspect is that the constant design standard should be applied in each design procedure. It entails the necessity of industrial housing development on the Open System basis. In this study, the design standard for Unit house will be established coping with the established preparing standard for design specifications defined by Architectural Law and Promotion Law of Housing Construction. That is for design standard of industrialized private housing on the Open System basis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.181-182
• /
• 2008

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.23-31
• /
• 2019

In this study, we conducted numerical analyses using the Taguchi method and finite element method to calculate the thermal deformation of a printed circuit board and the effect of design factors on the thermal deformation. Analysis results showed that the thermal deformation of the panel had the strongest effect on the thermal deformation and shape of the strip and unit. In particular, the deformation in the z direction was larger than that in the xy-plane direction. The effect of design factors and the design conditions for reducing the thermal deformation of the panel and strip changed at the unit level. Therefore, it is recommended that panel-level thermal deformation must be controlled to reduce the final thermal deformation at the unit level because the thermal deformation of the strip strongly affects that of the unit.

• Journal of the Korean Institute of Educational Facilities
• /
• v.16 no.2
• /
• pp.37-45
• /
• 2009

The purpose of this study is to suggest the plan formation for university dormitory's living unit by the modular unit of the pre-fabricated architecture, Pursuing this, this study conducts the investigation of present domestic situation of prefabricated construction and practices plan formation for living unit concentrating on the dweller's satisfaction by solving the problems which hitherto constructed dormitory had, especially collapse of dweller's territoriality. Consequently, this study presents the feasibility of modular unit of present prefabricated construction as a new method of dormitory's living unit construction, and suggests the pertinent plan formation for the improvement of the dweller's territoriality.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.16-18
• /
• 2001

3차원 영상을 처리하는데 있어 래스터라이제이션은 프레임 버퍼에 저장될 픽셀을 구하는 과정이다. 여러 개의 픽셀로 구성되는 폴리곤을 렌더링하기 위해서 스캔라인 방식 또는 반 평면 함수를 이용한 타일 트래버설 방식 등이 사용되고 있다. 본 논문에서 기반으로 하고 있는 타일 트래버설 방식은 스캔라인 방식에 비해 메모리 효율 및 텍스쳐 캐쉬의 지역성에서 이점을 가지고 있으나 복잡한 탐색 과정 때문에 파이프라인 구조로 구현하기는 어렵다. 본 논문에서 제안하는 구조는 분기 예측 기법을 적용하여 트래버설 과정에서의 분기로 인해 발생되는 파이프라인 지연을 기존의 트래버설 구조에 비해 약 30% 정도 줄임으로써 고성능 3차원 그래픽 가속기에 적합한 스캔 컨버젼 유닛을 제안하였다

• 건축구조
• /
• v.12 no.4
• /
• pp.52-53
• /
• 2005

a. 구조체가 받는 힘 중 횡력을 모두 메가컬럼이 부담하고, 내부외 보와 기둥은 중력방향의 하중만을 부담한다. b. 메가컬럼 안으로 코어 기능을 모두 넣어 자유로운 평면구성이 가능하다는 것이 최대의 장점이다. c. 모듈의 반복적인 조합을 통해 나온 유닛의 재조합으로 메가컬럼을 형성하고, 거대한 이 기둥을 외부로 노출시켜 구조미를 추구한다. d. 2009년 9호선 연장을 앞두고 서울의 최고 중심지가 될 강남역을 사이트로 정해 초고층 건물을 건축하여 도시경관을 더 돋보이게 한다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.51-54
• /
• 2011

In this study, It has the purpose to evaluate the insulation of the curtain wall of a building on the construction from 1990 to 2011 by measuring the inside and outside surface temperature of the curtain wall. The outside frame surface(mullion bar or spandrel bar) temperature of the curtain wall is 6℃~10℃ higher than that of the surface of glasses or insulation panel of curtain wall in winter. Furthermore the outside surface of frame anchor unit is 2℃~3℃ higher than section of other frame, so it was verified lossing lots of heating.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1207-1212
• /
• 2018

The signal intelligence (SIGINT) technology is actively used for collecting various data, in a number of fields, including a military industry. In order to collect the signal information and data and to transmit/receive the collected data efficiently, the accurate angle-of-arrival (AOA) information is required and communication disturbance from the interference or jamming signal should be minimized. In this paper, we present the structure of an adaptive beam-forming satellite system based on the planar array antenna, for collecting and transmitting/receiving the signal information and data efficiently. The presented adaptive beam-forming system consists of an antenna in the form of a planar array, an AOA estimator based on the Multiple Signal Classification (MUSIC) algorithm, an adaptive Minimum Variance Distortionless Response (MVDR) interference canceler, a signal processing and D/B unit, and a transmission beamformer based on Minimum mean Square Error (MMSE). In addition, through the computer simulation, we evaluate and analyze the performance of the proposed system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.206-208
• /
• 2011

플로팅건축물은 최근 지구온난화에 따른 해수면의 상승, 소득 증대 및 관광행태 변화에 따라 급증한 해양 레포츠 수요에 대응하는 효과적인 건축물이다. 플로팅건축은 프로그램, 형태, 건축규모, 층수, 위치, 접근방법, 이동성, 에너지 자립도 등 8가지 기준에 따라 유형 구분이 가능하다. 또한 시공된 주거시설을 대상으로 분석한 결과 플로팅건축의 디자인 특성은 (1) 2층 규모, (2) 면적 비율이 높은 데크, (3) 장방형의 균형감 있는 매스, (4) 조망 극대화, (5) 친수공간 확보, (6) 공간의 통합적 사용 및 합리적 면적 배분의 평면계획, (7) 수면 반사를 고려한 단면계획, (8) 모듈화 및 유닛화 등으로 정리할 수 있다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.3
• /
• pp.145-152
• /
• 2013

This study is to evaluate the thermal insulation of the curtain wall of the buildings constructed since the 1990s to the buildings currently under construction in 2011 and to provide the basic data for repairing and reinforcing and designing the thermal insulation. To this effect, the temperature difference by part was analyzed through measuring the inside and outside surface temperature of the curtain wall of the office building, and thereafter, the conditions of the thermal insulation and the thermal bridge part were examined. The result of the study is as follows; Not only in the winter season when the temperature difference between the indoor-outdoor is over $20^{\circ}C$, but also in the summer season when there is a small temperature difference, the temperature difference between the inside and outside of the frame is $2^{\circ}C{\sim}4^{\circ}C$ equally. Under such conditions as stated above, the thermal bridge occurred, which resulted from the heat flow of the steel frame part (mullion, transom), and therefore, the reinforcement of the thermal insulation is considered to be needed.