• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1511-1517
• /
• 2014

Based on the simulation model for phase noise effect, the phase noise performance of communication system using the M-ary APSK modulation method is analyzed in this paper. The phase noise effects for APSK higher order modulation method are modeled by considering the signal constellations of the modulation methods. The simulation model is verified by comparing the analytic results for lower order modulation signals with simulated results for those modulation signals. Based on the simulation model, then, the phase noise effects for M-ary APSK are analyzed. The simulated results for PSK lower order modulation signals are in agreement with the results by the analytic model in the order of 1 %. The proper phase noise effects for M-ary APSK modulation signals are deduced by the simulation model. Also, the required signal-to-noise ratios of phase noise are proposed for phase noise degradations, which are used as the design parameter that considers the phase noise effect.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.1-11
• /
• 2008

To overcome the mid frequency limitation of geometrical acoustic techniques, the phased geometrical method was suggested by introducing the phase information into the sound propagation from the source. By virtue of phase information, the phased tracing method has a definite benefit in taking the interference phenomenon at mid frequencies into account. Still, this analysis technique has suffered from difficulties in dealing with low frequency phenomena, so called, wave nature of sound. At low frequencies, diffraction at corners, edges, and obstacles can cause errors in simulating the transfer function and the impulse response. Due to the use of real valued absorption coefficient, simulated results have shown a discrepancy with measured data. Thus, incorrect phase of the reflection characteristic of a wall should be corrected. In this work, the uniform theory of diffraction was integrated into the phased beam tracing method (PBTM) and the result was compared to the ordinary PBTM. By changing the phase of the reflection coefficient, effects of phase information were investigated. Incorporating such error compensation methods, the acoustic prediction by PBTM can be further extended to low frequency range with improved accuracy in the room acoustic field.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1142-1148
• /
• 1999

In this paper, the characteristics of frequency dependent dispersion are analyzed for the phase shifters in Ku-band phased array antenna system using full-wave method, SDA(Spectral Domain Approach).The design technique of asymmetric coupled-line phase shifter with dielectric overlay is proposed. The compared results of phase responses are shown with conventional symmetric coupled-line Schiffman phase shifter. The experimental results verify the improvement of broadband characteristics by the increasing bandwidths and the decreasing phase deviations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1780-1786
• /
• 2005

The phase error generated in the transmission system affects the performance of digital transmission signal. The phase error are generated by random phase noise and tracking phase error due to denier phenomenon. In the mobile satellite communication system that generates the doppler frequency, which is a system with a movement, the proper system phase noise spectrum should be designed based on analyses for phase noise and static phase error effects. Based on the analyses of the doppler frequency and the phase error for bilateral satellite communication system providing an asynchronous service, the phase noise spectrums for the mobile satellite communication are designed in this paper. Also, the available transmission services under the less doppler effect are proposed and the proper signal source units for a required transmission system can be designed under the proposed system phase noise spectrum.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.6
• /
• pp.241-248
• /
• 2008

The objective of sensitivity analyses is to identify critical variables of structural models and how their variability impacts mechanical response results. The sensitivity analyses have been used as significant basis data for practical applications of measuring and reinforcing fragile building structures. This study presents several sensitivity analysis methods for topological optimum designs of linear elastostatic structural systems. Numerical examples for structural analyses and topological optimum modeling demonstrate the reliability of sensitivities formulated in the present study.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.270-274
• /
• 2002

본 논문은 고속 무선랜에 적용하고 있는 OFDM시스템에서 국부발진기의 위상잡음에 의해서 기저대역의 채널에서 나타나는 위상변위특성을 해석하고, 국부발진기를 포함하는 PLL시스템에서 위상잡음 변화를 수치적인 해석을 하였다. OFDM신호를 QPSK, 16QAM 변조신호로 전송하였을 경우, 위상잡음에 따른 관계를 변조신호의 성상도 및 BER관계로써 분석하였다.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.290-292
• /
• 1999

핵연료봉이나 제어봉과 같은 봉구조물의 검사를 위하여 원격장와전류 효과를 낼 수 있는 탐촉자를 설계하고 탐상주파수를 유한요소해석을 통해 설정하였다. 핵연료봉을 대상으로 한 해석에서 exciter coil 주변을 차폐하고 500kHz의 주파수를 사용한 결과 전위계곡과 위상매듭의 존재가 나타나 원격장와전류 효과가 구현되었음을 확인하였다. exciter와 sensor coil로 이루어진 탐촉자를 이동시키면서 예측한 탐상신호에서는 센서를 원격장 의치에 고정시켰을 때, 결함이 센서를 지날 때의 위상신호와 결함이 exciter를 지날 때의 위상신호가 서로 달리 나타났다. 또한, 외부결함과 내부결함이 센서를 지날 때의 위상지연은 작지만 서로 반대의 경향으로 나타났으며, 두 종류의 결함이 exciter를 지날 때는 위상지연이 상대적으로 크게 줄어들고 외부/내부 결함에 상관없이 신호가 비슷하게 나타남을 볼 수 있었다. 이러한 신호형태는 자성체 관의 탐상에서 내, 외부 결함신호가 구별이 안되고, 동일한 위상신호가 항상 쌍으로 나타나는 것과 비교할 때, 신호해석을 훨씬 수월하게 해 줄 수 있을 것이라고 판단된다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.3
• /
• pp.213-220
• /
• 2000

The method of photoelasticity allows one to obtain principal stress differences and principal stress directions in a photoelastic model. In the classical approach, the photoelastic parameters are measured manually point by point. The previous methods require much time and skill in the identification and measurement of photoelastic data. Fringe phase shifting method has been recently developed and widely used to measure and analyze fringe data in photo-mechanics. This paper presents the test results of photoelastic fringe phase shifting technique for the stress analysis of a circular disk under compression and an edge-cracked plate subjected to tensile load. The technique used here requires four phase stepped photoelastic images obtained from a circular polariscope by rotating the analyzer at $0^{\circ}$, $45^{\circ}$, $90^{\circ}$ and $135^{\circ}$. Experimental results are compared with those or FEM. Good agreement between the results can be observed. However, some error may be included if the technique is used to general direction which is not parallel to isoclinic fringe.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.574-577
• /
• 2010

이번 연구에서는 저속 비압축성 유체-구조 연성을 고려한 위상 최적화을 위해 새로운 모노리틱 해석을 개발한다. 이 새로운 해석 기법에서는 기존의 유체-구조 연성 시스템 해석 기법에서 유체와 구조 영역을 분리하고 연성 조건을 만족시키는 것과 다르게 하나의 일치된 해석 방정식을 유체 영역과 구조 영역에 동일하게 적용한다. 또한, 경계조건을 만족시키기 위하여 단일화 된 해석 방정식의 물성치를 바꾸어주는 새로운 방식을 제시하였다. 이 새로운 방법에서는 유체, 구조 영역을 분리하지 않고 Navier-Stoke's 방정식과 선형 탄성식을 동시에 사용하였다. 또한, 유체-구조 영역이 연성 해석 중 변화하는 것을 반영하기 위하여 구조 변위를 이용하여 Deformation tensor를 계산하였고 이를 이용하여 변형 후에서의 Navier-Stoke 방정식의 미분을 계산하는 방법을 제안하였다. 그리고, 정상 상태 유체를 가정하고 속도에 비례하는 마찰힘인 Darcy's force 항을 Navier-Stoke 방정식에 넣고 이 마찰 힘의 크기를 변화시킴으로 해서 유체 방정식에서의 연성 경계 조건을 만족시켰다. 선형 탄성 방정식에서 Divergence이론을 이용해서 경계에서 작용하는 외력이 하는 일을 내부 시스템에 하는 일로 계산하였다. 개발된 모노리스 해석 방법을 이용하여 저속 비압축성 유체가 구조에 미치는 압축력을 계산하였고 이용하여 컴플라이언트 미케니즘을 설계하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.649-656
• /
• 2002

This paper addresses the phase noise analysis of high-speed DH-PLL(Digital Hybrid Phase-Locked Loops) frequency synthesizer. Because of the additional quantization noise of D/A converter in DH-PLL, the phase noise of DH-PLL is increased than the conventional PLL. Three kinds of noise sources such as reference input, D/A converter, and VCO(Voltage Controlled Oscillator) are considered to analyze the phase noise. It largely depends on the closed loop bandwidth and frequency synthesis division ratio(N) so that we can decide the optimal closed loop bandwidth to minimize the phase noise of DH-PLL. It is shown that the simulation results closely match with the results of analytical approach.