• Korean Journal of Optics and Photonics
• /
• v.12 no.4
• /
• pp.327-333
• /
• 2001

Estimation of the frequency response of Ti:LiNb03 traveling-wave optical modulator with phase reversal electrodes is succinctly presented. The fact that such devices may have bandpass characteristics is demonstrated through simulations based on the derived equations. The influence of each parameter of traveling-wave electrodes on the frequency response is investigated in detail. It is shown that the center frequency and the bandwidth of response curves can be effectively adjustable by changing the MW effective index and the interaction length of the electrodes. rodes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.12
• /
• pp.16-21
• /
• 2007

In this paper, the dual-band voltage-controled oscillator (VCO) using the composite right/left-handed (CRLH) transmission line (TL) and the tunable negative resistance based on the fin diode is presented. It is demonstrated that the CRLH TL can lead to metamaterial transmission line with the dual-band tuning capability. The dual-band operation of the CRLH TL is achieved by the frequency offset and the phase slope of the CRLH TL, and the frequency ratio of the two operating frequencies can be a non-integer. Each frequency band of VCO has to operate independently, so we have used the tunable negative resistance based on the pin diode. When the forward bias has been into the pin diode, the phase noise of VCO is $-108.34\sim-106.67$ dBc/Hz @ 100 kHz in the tuning range, $2.423\sim2.597$ GHz, whereas when the reverse bias has been fed into the pin diode, that of VCO is $-114.16\sim-113.33$ dBc/Hz @ 100 kHz in the tuning range, $5.137\sim5.354$ GHz.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.531-537
• /
• 2018

A novel PLL with a delta-sigma modulator and a spur reduction circuit is proposed. delta-sigma modulator makes the LF remove noise easily by moving the spur noise to a higher frequency band. Therefore, the magnitude of spur can be reduced the reasonable bandwidth. The spur reduction circuit reduces the spur size by reducing the LF voltage change generated during the period of reference signal. The spur reduction circuit is designed as simple as possible not to increase the size of PLL. The proposed PLL with the previous two techniques is designed with a supply voltage of 1.8V in a 0.18um CMOS process. Simulation results show an almost 20dB reduction in the magnitude of spur. The spur reduced PLL can be used in narrow bandwidth communication system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.651-657
• /
• 2018

A novel PLL with a delta-sigma modulator and a spur reduction circuit is proposed. delta-sigma modulator makes the LF remove noise easily by moving the spur noise to a higher frequency band. Therefore, the magnitude of spur can be reduced the reasonable bandwidth. The spur reduction circuit reduces the spur size by reducing the LF voltage change generated during the period of reference signal. The spur reduction circuit is designed as simple as possible not to increase the size of PLL. The proposed PLL with the previous two techniques is designed with a supply voltage of 1.8V in a 0.18um CMOS process. Simulation results show an almost 20dB reduction in the magnitude of spur. The spur reduced PLL can be used in narrow bandwidth communication system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.11
• /
• pp.60-66
• /
• 2007

In this paper, a novel voltage-controlled oscillator (VCO) using the microstrip square open loop multiple split ring resonator (OLMSRR) is presented for reducing the phase noise property. The square-shaped multiple split ring resonator (MSRR) having the form of the microstrip square open loop is investigated to realize this property. Compared with the microstrip square open loop resonator and the microstrip square open loop split ring resonator (OLSRR) as well as the conventional microstrip line resonator, the microstrip square OLMSRR has the larger coupling coefficient value, which makes a higher Q value, and has reduced the phase noise of VCO. The VCO with 1.7V power suppIy has the phase noise of $-124.5\;{\sim}\;-122.0\;dBc/Hz$ @ 100 kHz in the tuning range, $5.746\;{\sim}\;5.84\;GHz$. The figure of merit (FOM) of this VCO is $-203.96\;{\sim}\;-201.6\;dBc/Hz$ @ 100 kHz in the same tuning range. Compared with VCO using the conventional microstrip line resonator, VCO using the microstrip square open loop resonator and VCO using microstrip square OLSRR, the phase noise property of VCO using the proposed resonator has been improved in 25.66 dB, 8.34 dB, and 4.5 dB, respectively.

• Korean Journal of Optics and Photonics
• /
• v.35 no.4
• /
• pp.157-163
• /
• 2024

We developed a 3-channel fiber laser with a common seed and a phase control system for laser beam combining through a diffractive optical element. Beam combining was performed by adjusting the angles of the beams incident on the diffractive optical elements, and the phase of each beam was controlled to maximize the intensity of the combined laser beam. The power of the 3-channel laser before passing through the diffractive optical elements is about 65 mW. The power of the combined beam varied between 2.9 mW and 48.3 mW depending on the phase change of each channel. Through phase control, the output of the combined beam can be maintained at 42 mW for more than 91.8% of the total time. It is expected that higher combining efficiency can be achieved by improving the transmittance of the diffractive optical elements and the performance of the phase control system.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.7-8
• /
• 2007

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.79-84
• /
• 2007

In this paper, a fully-integrated low phase noise multi-band CMOS VCO using automatic level controller (ALC) and switched LC tank has been presented. The proposed VCO has been fabricated in a 0.13-um CMOS process. The switched LC tank has been designed with a pair of capacitors and two pairs of inductors switched using MOS switch. By using this structure, four band (2.986 ${\sim}$ 3.161, 3.488 ${\sim}$ 3.763, 4.736 ${\sim}$ 5.093, and 5.35 ${\sim}$ 5.887 GHz) operation is achieved in a single VCO. The VCO with 1.2 V power supply has phase noise of -118.105 dBc/Hz @ 1 MHz at 2.986 GHz and -113.777 dBc/Hz @ 1 MHz at 5.887 GHz, respectively. The reduced phase noise has been approximately -1 ${\sim}$ -3 dBc/Hz @ 1 MHz in the broadest tuning range, 2.986 ${\sim}$ 5.887 GHz. The VCO has consumed 4.2 ${\sim}$ 5.4 mW in the entire frequency band.

• Korean Journal of Optics and Photonics
• /
• v.34 no.3
• /
• pp.99-105
• /
• 2023

The performance of astronomical telescopes can be negatively affected by atmospheric turbulence. To address this issue, techniques for atmospheric turbulence correction have been developed, requiring the simulation of atmospheric turbulence in the laboratory. The most practical way to simulate atmospheric turbulence is to use a phase plate. When measuring a phase plate that simulates strong turbulence, a Shack-Hartmann wave-front sensor is commonly used. However, the laser power decreases as it passes through the phase plate, potentially leading to a weak laser signal at the sensor. This paper investigates the need to control the laser power when measuring a phase plate that simulates strong atmospheric turbulence, and examines the effects of the laser power on the measured wavefront. For phase plates with relatively high Fried parameter r₀, the laser power causes a variation of over 10% in r₀. For phase plates with relatively low r₀, the laser power causes a variation of less than 5%, which means that the influence of the laser power is negligible for phase plates that simulate strong atmospheric turbulence. Based on the system described in this paper, a phase plate simulating strong atmospheric turbulence can be measured at a laser power of 5 mW or higher. Therefore, controlling the laser's output power is necessary when measuring a phase plate for simulating atmospheric turbulence, especially for phase plates with low r₀ values.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1A
• /
• pp.35-40
• /
• 2011

The complex-valued blind algorithm based on a set of randomly generated symbols and Euclidean distance can take advantage of information theoretic learning and cope with the channel phase rotation problems. On the algorithm, in this paper, the effect of kernel size has been studied and a kernel-modified version of the algorithm that rearranges the forces between the information potentials by kernel-modification has been proposed. In simulation results for 16 QAM and complex-channel models, the proposed algorithm show significantly enhanced performance of symbol-point concentration and no phase rotation problems caused by the complex channel models.