• Journal of Intelligence and Information Systems
• /
• v.17 no.2
• /
• pp.1-22
• /
• 2011

In this paper, we propose an adaptive genetic algorithm (aGA) approach for effectively solving the sequencing problem with precedence constraints (SPPC). For effective representation of the SPPC in the aGA approach, a new representation procedure, called the topological sort-based representation procedure, is used. The proposed aGA approach has an adaptive scheme using a fuzzy logic controller and adaptively regulates the rate of the crossover operator during the genetic search process. Experimental results using various types of the SPPC show that the proposed aGA approach outperforms conventional competing approaches. Finally the proposed aGA approach can be a good alternative for locating optimal solutions or sequences for various types of the SPPC.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.11
• /
• pp.894-901
• /
• 2017

In the existence of motion, azimuth phase error due to accuracy limitation of GPS/IMU and system delay is unavoidable and it is essential to apply autofocus to estimate and compensate the azimuth phase error. In this paper, autofocus algorithm using MWLS(Modified WLS) is proposed. It shows the robust performance compared with original WLS using new target selection/sorting metric and iterative azimuth phase estimation technique. SAR raw data obtained in a captive flight test is used to validate the performance of the proposed algorithm.

• Journal of Broadcast Engineering
• /
• v.19 no.1
• /
• pp.64-74
• /
• 2014

The primary and ambient signal decomposition of a stereo sound is a key step to the stereo upmix. The principal component analysis (PCA) is one of the most widely used methods of primary-ambient signal decomposition. However, previous PCA-based decomposition algorithms assume that stereo sound sources are only amplitude-panned without any consideration of phase difference. So it occurs some performance degradation in case of live recorded stereo sound. In this paper, we propose a new PCA-based stereo decomposition algorithm that can consider the phase difference between the channel signals. The proposed algorithm overcomes limitation of conventional signal model using PCA with phase alignment. The phase alignment is realized by using inter-channel phase difference (IPD) which is widely used in parametric stereo coding. Moreover, Enhanced Modified PCA(EMPCA) is combined to solve the problem of conventional PCA caused by Primary to Ambient energy Ratio(PAR) and panning angle dependency. The simulation results are presented to show the improvements of the proposed algorithm.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.2
• /
• pp.33-44
• /
• 2022

The simulation function by the 4D system is a representative BIM function in the construction stage. For the 4D simulation, schedule information for each activity must be created and then linked with the 3D model. Since the 3D model created in the design stage does not consider schedule information, there are practical difficulties in the process of creating schedule information for application to the construction stage and linking the 3D model. In this study, after extracting the schedule information of the construction stage using the HDBSCAN algorithm from the 3D model in the design stage, authors propose a methodology for automatically generating schedule information by identifying precedence and sequencing relationships by applying the topological alignment algorithm. Since the generated schedule information is created based on the 3D model, it can be used as information that is automatically linked by the common parameters between the schedule and the 3D model in the 4D system, and the practical utility of the 4D system can be increased. The proposed methodology was applied to the four bridge projects to confirm the schedule information generation, and applied to the 4D system to confirm the simplification of the link process between schedule and 3D model.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.1
• /
• pp.149-159
• /
• 2008

In this paper, we propose a blind watermarking algorithm of 3d mesh model using spherical parameterization. Spherical parameterization is a useful method which is applicable to 3D data processing. Especially, orthogonal coordinate can not analyse the feature of the vertex coordination of the 3D mesh model, but this is possible to analyse and process. In this paper, the centroid center of the 3D model was set to the origin of the spherical coordinate, the orthogonal coordinate system was transformed to the spherical coordinate system, and then the spherical parameterization was applied. The watermark was embedded via addition/modification of the vertex after the feature analysis of the geometrical information and topological information. This algorithm is robust against to the typical geometrical attacks such as translation, scaling and rotation. It is also robust to the mesh reordering, file format change, mesh simplification, and smoothing. In this case, the this algorithm can extract the watermark information about $90{\sim}98%$ from the attacked model. This means it can be applicable to the game, virtual reality and rapid prototyping fields.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.4
• /
• pp.302-307
• /
• 2012

Real-time systems perform periodic tasks and real-time aperiodic tasks such as alarm processing. Especially the periodic tasks included in control systems such as robots have precedence relationships among them. This paper proposes a new scheduling algorithm based on topological sort and residual time. The precedence relationships among periodic tasks are translated to the priorities of the tasks using topological sort algorithm. During the execution of the system the proposed scheduling algorithm decides on whether or not a newly arrived real-time aperiodic task is accepted based on residual time whenever the aperiodic task such as alarm is arrived. The proposed algorithm is validated using examples.

• The Journal of the Korea Contents Association
• /
• v.14 no.4
• /
• pp.407-417
• /
• 2014

An arirang is the most famous Korean folk song and was registered in UNESCO(Unitied Nations Educational, Scientific and cultural Organization) as an intangible cultural heritage in 2012. Most arirangs are composed of text and refrain parts. Genealogy of the arirang was classified in refrain patterns by using multiple sequence alignment algorithm. There are two different refrain patterns, slow and fast melodies. Of 106 arirangs, 38 and 68 arirangs contain fast and slow melodies, respectively. 73 arirangs and 104 their key words were extracted from bipartate arirang network that composed of arirangs, text works, and their relationships. The correlation among the arirangs was analyzed from the selected arirangs and key words by using pairwise comparison matrix. Also, analysis of correlation among the arirnags was performed by stepwise removal of the single degree nodes from the bipartate arirang network In this study, arirangs were analyzed in genealogy and correlation among arirangs by using informatic algorithm and network technology, in which arirang research will be constructed a stepping stone for the popularization and globalization of the arirangs.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.7
• /
• pp.560-570
• /
• 2017

Recently, well-known SAR imaging algorithms have been developed to form the focused SAR images for stationary targets. In general, the conventional methods exploit the range variation only defined by the motion of radar platform and SAR geometry. However, for SAR imaging of ground moving targets, the motion of the targets induces an additional range shift, yielding the blurred SAR images. To overcome the problem, in this paper we propose an effective motion compensation algorithm operated under a multi-channel SAR, named along-track interferometry(ATI) and phase unwrapping to directly estimate the motion parameters of the targets. In simulations, 50 Monte-Carlo simulation results show the effectiveness of the algorithm in the presence of noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.289-295
• /
• 1995

구조물의 동적부하에 대한 동적변형 응답을 정확히 예측하고, Over Design이나 Under Design이 아닌 합리적인 설계방안의 개발은 중요한 과제이다. 동적강도해석이나 소음 승차감과 같은 진동 및 충격에 기인하는 제반 문제를 복잡한 구조물을 대상으로 합리적으로 처리하기 위한 Dynamic Design Analysis는 높은 신뢰성의 추구와 더불어 필요불가결한 기술이 되고 있다. 동적해석 방법으로는 현재 유한요소법이 널리 사용되고 있으며 여러 종류의 범용 프로그램들이 보급되어 있는 실정이다. 그러나 특히 동적문제에 있어서는 형상이나 거동이 복잡한 구조물의 경우, 또는 차량의 차체와 같이 많은 장착물이 부착된 경우에는 유한요소법의 적용이 곤란하여, 지금까지 대처할 수 있는 유용한 방법이 없었다. 따라서 비교적 용이하고 간단하게 적용가능한 진동실험을 기초로 한 구조물의 동적 응답해석 및 설계 방안의 개발이 필요하다. 본 연구에서는 진동시험으로 얻어진 부분구조물의 응답특성과 결합특성으로부터 결합 후의 응답특성을 예측할 수 있는 방법을 전달함수합성이론을 기초로하여 프로그래밍 package화 한다. 그리고 평판구조물에 대하여 진동시험과 컴퓨터 시뮬레이션을 통하여 개발된 방법의 타당성을 검증한다. 또한 실제 차량에서 차체만의 진동시험과 엔진의 자유진동시험에 의한 시험데이터로부터 차체와 엔진이 마운트 결합된 후의 진동특성을 예측한다. 진동시험시에 입력과 출력에 노이즈가 필연적으로 혼입되어 주파수응답함수의 크기(magnitude)와 위상(phase)을 왜곡시킨다. 특히 위상의 왜곡은 복소수연산을 하는 전달함수합성법의 결과에 중요한 영향을 미치게 된다. 본 연구에서는 데이타 획득시 입력과 출력의 시간지연으로 생기는 위상왜곡을 보정하는 방법을 제시하고, 그 개선 정도를 조사한다.는 소견의 확실도로서 가능성을 표현한 것이다. 예를 들면, 진동진폭 스펙트럼상에 2X 성분이 상당히 크게 나타나 정렬불량의 가능성이 0.7 정도라고 판정하는 것 등은 이러한 수치적진리치를 이용하는 방법이다. 그러나 상기의 수치적 표현만으로는 확실도를 한개의 수치로서 대표하게 하는 것은 진단의 정밀도에 문제가 있을 것으로 생각된다. 따라서 언어적진리치가 도입되어 [상당히 확실], [확실], [약간 확실] 등의 언어적인 표현을 이용하여 애매성을 표현하게 되었다. 본 논문에서는 간이진단 결과로부터 추출된 애매한 진단결과중에서 가장 가능성이 높은 이상원인을 복수로 선정하고, 여러 종류의 수치화할 수 없는 언어적(linguistic)인 정보ㄷㄹ을 if-then 형식의 퍼지추론으로 종합하는 회전기계의 이상진단을 위한 정밀진단 알고리즘을 제안하고 그 유용성을 검토한다. 존재하여도 모우드 변수들을 항상 정확하게 구할 수 있으며, 또한 알고리즘의 안정성이 보장된 것이다.. 여기서는 실험실 수준의 평 판모델을 제작하고 실제 현장에서 이루어질 수 있는 진동제어 구조물에 대 한 동적실험 및 FRS를 수행하는 과정과 동일하게 따름으로써 실제 발생할 수 있는 오차나 error를 실험실내의 차원에서 파악하여 진동원을 있는 구조 물에 대한 진동제어기술을 보유하고자 한다. 이용한 해마의 부피측정은 해마경화증 환자의 진단에 있어 육안적인 MR 진단이 어려운 제한된 경우에만 실제적 도움을 줄 수 있는 보조적인 방법으로 생각된다.ofile whereas relaxivity at high field is not affected by τS. On the other hand, the change in τV does not affect low field profile but strongly in fluences on bot

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.79-86
• /
• 2001

This study shows an attempt to generate an assembly sequence and its model for a ship block assembly using the graph theory and graph algorithms. To generate the ship block assembly, we propose four levels of the ship block assembly model such as "geometry mode1", "relational model", "sequential mode1", and "hierarchical model". To obtain the relational model, we used surface and surface intersection algorithm. The sequential model that represents a possible assembly sequence is made by using several graph algorithms from the relational model. The hierarchical model will be constructed from the sequential model in order to represent the block assembly tree and so forth. The purpose of the hierarchical model is to define an assembly tree and to generate the Bill Of Material(BOM). Lastly, the validity of the method proposed in this study is examined with application to ship block assembly models of a single type and double type according to four models mentioned above.