• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.152-155
• /
• 2000

This paper presents the characteristics of phase shifter which is operating at 2 GHz band and 12 GHz band. Two types of substrate stick with different dielectric constants are considered in these bands. Dielectric constants of microstrip feed crank line is 2.6. In the case of a small substrate stick with dielectric constant of 9 in the calculation, S21 phase is linearly varied at 1.98 GHz and 2.45 GHz, and variation of the shifting angle is about 20。. The angle of S21 phase shifting at 12 GHz band if calculated about 30。

• Proceedings of the KIEE Conference
• /
• 2009.04a
• /
• pp.86-88
• /
• 2009

This article suggests an online-based remote fault current mode discrimination method in order to identify the causes of the power line faults with various causes. For that, it refers to existing cause identification methods and categorizes modes by fault causes based on statistical techniques beforehand and performs the pre-treatment process of fault currents by each cause acquired from the fault recorder into a phase space in order to extract the characteristics of fault currents by each cause. After that, for the fault mode categorization, it discriminates modes by each cause using data by each cause as leaning data through utilizing RBF network. And then it tests the validity of the suggested method as applying it to the data of the actual fault currents acquired from the fault recorder in the electric power transmission center.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.259-264
• /
• 2003

This paper suggests a material mixing method to mix several materials in a structure. This method is based on ESO(Evolutionary Structural Optimization), which has been used to optimize topology of only one material structure. In this study, two criterions for material transformation and element removal are implemented for mixing several materials in a structure. Optimal topology for a multiple material structure can be obtained through repetitive application of the two criterions at each iteration. Two practical design examples of a short cantilever are presented to illustrate validity of the suggested material mixing method. It is found that the suggested method works very well and a multiple material structure has more stiffness than one material structure has under the same mass.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.590-595
• /
• 2001

Vibration transient generated by developing localized fault in gear can be used as indicators of condition monitoring in a gear. In this paper, we propose the phase map for a fault signal using continuous wavelet transform to detect this vibration transient. Local fault induces the abrupt fluctuation of load exciting tooth and phase lag in the vibration signal measured on the gearbox. The relatively large fault like "tip breakage" easily can be detected by the clear fluctuation of exciting load. However, minor fault like "initial pitting" cannot be detected using the load fluctuation. To detect this kind of minor fault, the phase map for a fault signal is taken into account. The phase lag by minor fault is observed well in the phase map.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.339-343
• /
• 1998

Sinusoidal model 은 음성신호처리의 넓은 분야에 적용되고 있는 방법으로 고음질의 합성음을 생성해 낼 수 있고, 조작이 용이하다는 장점을 가지고 있다. 본 논문에서는 Analysis-by-synthesis/Overlap-add Sinusoidal model 이라는 방법을 이용하여 시간축 변환과 dam성 변환을 수행하였다. 특히 본 논문에서는 음질향상을 위하여 시간축 변환시에는 정적인 구간과 변화하는 구간을 구별하여 서로 다른 시간축 변환비를 이용하였고, 기존의 LPC 방법에 비해 스펙트럼 포락선을 보다 잘 추정하는 Improved Cepstrum을 이용하여 음정변환에 적용하였다. 또 서로 다른 문맥에서 얻어진 음성단위들을 결합할 때 생기는 위상차이를 극복하기 위하여, 기본주파수 성분이 일치하도록 시간축을 이동하여 합성하였다. 실험결과 본 논문에서 적용한 방법들을 통해 기존 방식에 비해 개선된 음질을 얻을 수 있었다.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2192-2195
• /
• 2003

This parer proposes a power-line phase measurement algorithm which is based on the recursive implementation of sliding-DFT. Usage of the single DFT coefficient in the conventional sliding-DFT based power-line phase measurement brings a significant error propagation when implemented in hardware with finite word-length arithmetic operations. The proposed algorithm utilizes all the N-point DFT coefficients in the recursion. Performance degradation caused by the finite word- length implementation of the algorithm is analyzed and verified with computer simulations. The robustness of the proposed phase measurement algorithm against the erroneous implementation is also confirmed by the performance analysis and simulation.

• Journal of Astronomy and Space Sciences
• /
• v.3 no.2
• /
• pp.93-102
• /
• 1986

For a geostationary satellite east-west station keeping maneuvers must control both the mean longitude and the orbit eccentricity simultaneously. The effect on the orbit eccentricity of maneuvers may be reprensented by a phse plane of $e_{c}$ verse $e_{s}$, since these eccentricity elements give the projection of the orbit center onto the equatorial plane in units of the semimajor axis. The evolution of the mean longitude and the orbit eccentricity are obtained.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.498-503
• /
• 2003

Dynamic analysis of a plate with non-linearity due to large deformation is performed in the study. There have been many researches about the non-linear dynamic behavior of plates examining by means of theoretical or numerical analyses. But it is important how exactly model the actual system. In this respect, the Continuous-Time system identification technique is used to generate non-linear models, for stiffness and damping terms, to explain the observed behaviors with single mode assumptions for the simplicity after comparing the experimental results with the numerical results of a linear plate model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.230-231
• /
• 2011

There is a merit a planetary gear set disperses a delivery load, and to decrease loss of friction and noise. But, in addition to meshing this internal and external gear simultaneously and phase difference by the tooth contact point and the time difference occurs asymmetric and symmetric sideband noise and vibration caused by the modulation in the vehicle. Existing planetary gear set research have progressed to reduce the cause of the sideband as run-out, pitch error and imbalance. In this paper presents a method for the design of the carrier phase difference by developing various theorys and experiments for gear noise.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.133.1-133.1
• /
• 2011

태양풍이 지구 전파통신에 미치는 영향을 예측하고 대응하기 위해 전파연구소와 협력하여 태양풍의 운동을 모니터할 수 있는 시스템을 개발하고 있다. 태양풍이 일으키는 섬광(scintillation)에 의해 태양풍 배후에 있는 전파원 밝기가 변하는 것을 측정하여 역으로 태양풍의 이동속도, 전자밀도 등을 유도하는 원리를 이용한다. 포물면형의 전파망원경 대신 시야가 넓은 다이폴 안테나를 24개 단위로 묶은 타일 32개를 동서-남북으로 수백미터 넓이의 부지에 배열하고 전자빔조향으로 원하는 천체를 추적한다. 타일은 수동으로 남북방향으로 움직일 수 있어 계절별로 태양근처의 전파원을 잘 볼 수 있도록 하였다. 각 타일에서 나온 신호는 약 10MHz의 대역폭으로 디지털화되어 컴퓨터에 기록되고 실시간에 가깝게 각 타일간의 천체 위치별 위상차를 보정한 후 합성되어 전파원의 세기를 측정한다. 이 신호들을 교차상관시키면 야간에는 천문용 간섭계로도 사용할 수 있다. 기본적으로는 MWA를 참고해서 설계한 것이나, 동작을 입증하기 위해서 타일 3개로 이루어진 시제품도 제작하였다. 현재 각 부분별로 제작이 진행되고 있으며 하드웨어는 올해 말까지 완성될 것이다.