• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.909-916
• /
• 2009

This paper presents the automatic vision algorithm to generate and calibrate reference phase plane to improve the accuracy of 3D measuring machine of using phase shifting projection moire method, which is not traditional N-bucket method, but is based on direct image processing method to the pattern projection image. Generally, to acquire accurate reference phase plane, the calibration specimen with well treated surface is needed, and detailed calibration method should be performed. For the cost reduction of specimen manufacturing and the calibration time reduction, on the specimen, not specially designed, with general accuracy level, an efficient calibration procedure for the reference phase generation is proposed. The proposed vision algorithm is developed to extract the line center points of the projected line pattern from acquired images, derive the line feature information consisting of its slope and intercept by using sampled feature points, and finally generate the related reference phase between line pairs. Experimental results show that the proposed method make reference phase plane with a good accuracy under noisy environment and the proposed algorithm can reduce the total cost to make high accurate calibration specimen, also increase the accuracy of reference phase plane, and reduce the complex calibration procedure to move grid via N-bucket algorithm precisely.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.3
• /
• pp.81-86
• /
• 2010

Since CORDIC (COordinate Rotation DIgital Computer) is able to carry out the phase operation, such as vector to phase conversion or rotation of vectors, with adders and shifters, it is well suited for the design of the frequency synchronization unit in OFDM receivers. It is not easy, however, to fully utilize the CORDIC in the OFDM demodulator because of the non-linear characteristics of the direction sequence (DS), which is the representation of the phase in CORDIC. In this paper a new representation method is proposed to linearize the direction sequence approximately. The maximum phase error of the linearized binary direction sequence (LBDS) is also discussed. For the purpose of designing the hardware, the architectures for the binary DS (BDS) to LBDS converter and the LBDS to BDS inverse converter are illustrated. Adopting LBDS, the overall frequency synchronization hardware for OFDM receivers can be implemented fully utilizing CORDIC and general arithmetic operators, such as adders and multipliers, for the phase estimation, loop filtering of the frequency offset, derotation for the frequency offset correction. An example of the design of 22 bit LBDS for the T-DMB demodulator is also presented.

• Korean Journal of Optics and Photonics
• /
• v.33 no.6
• /
• pp.317-323
• /
• 2022

In this investigation, we describe a chromatic confocal sensor based on a geometric phase lens for measuring the thicknesses of transparent plates. In order to design a compact sensor, a geometric phase lens, which has diffractive and polarizing characteristics, is used as a device to generate chromatic aberration, and a fiber optic module is adopted. The systematic error of the sensor is reduced with wavelength peak detection by Gaussian curve fitting and the common error compensation obtained by the repeatedly consecutive experimental results. An approach to calculate the plate thickness is derived and verified with sapphire and BK7 plates. Because of the simple and compact design of the proposed sensor with rapid measurement capability, it is expected to be widely used in thickness measurements of transparent plates as an alternative to traditional approaches.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.97-103
• /
• 2018

In satellite communication, modulated beacon signal is spreaded by gold sequence and the modulated beacon is transmitted via linear phase modulation. Due to the difference in characteristics of the satellite and the receiver on the ground, frequency offset (FO) occurs. An existing modulated beacon receiver is a method of synchronizing the frequency of a modulated beacon signal using FFT(Fast Fourier Transform), which not only increases the delay and complexity in terms of system implementation but also has a separate circuit for compensating the phase difference due to FO and phase offset from FFT points. In order to overcome this problem, this paper proposes and analyzes a scheme for compensating and demodulating the coarse FO and phase offset at one time using the 2-phase shaped characteristics of the modulated beacon signal. Also, through the simulation, the modulation index suitable for the proposed method is analyzed and the appropriate cumulative number is also analyzed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.143-148
• /
• 2013

This paper study about multi-beam for ditection of arrival estimation in wireless system. estimate a direction of arrival of target in multi input-output array antennas system. Beam steering method are divided by beam steering method of elevation angle or beam forming method, stack beam steering, frequency steering, phase steering radar and digital beam forming radar. Proposed algorithm is combined SVD method and antenna weight error compensation method with phase and amplitude compensation to effectivity beam steering. Through simulation, we were analysis of performance that general algorithm and proposed target estimation algorithm in this paper. It was proved to improved proposal algorithm than general algorithm in target direction of arrival estimation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.1 s.13
• /
• pp.41-52
• /
• 1999

In order to correct mismatches between neighboring digital maps, the middle line method has been widely used. However, it may result in not only a corruption of the topological consistency between the objects near to boundaries but also degeneration of accuracy. In this paper, we propose two edge-matching methods to overcome the problem of the middle line method. The first method is based on the rubber sheeting, which performs an elastic transformation for the objects located around the boundaries. The second method transforms the geometry of objects by the function of the distance from the boundary. These methods have important advantages that they preserve the topology of the original maps and improve tile accuracy, compared with the previous methods.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.397-398
• /
• 2014

Phase Shifted PWM은 각각의 셀이 동일한 스위칭 주파수로 PWM을 수행하므로 전압지령의 크기와 관계없이 셀 간의 전력은 동일하나, 각 셀 출력 전압의 위상이 다르므로 무부하 운전이나 부하의 급변동 시 발생하는 회생이 특정 셀에 집중되고 전압지령과 실제 출력전압 사이의 위상 차이가 존재하는 단점을 가지고 있다. 반면 기존 Level Shifted PWM은 전압지령의 크기에 따라 각 셀 간의 스위칭 조건이 다르고 동일 전력 분배가 되지 않는 문제를 가지고 있어 이를 개선하는 Level Shifted PWM 방법에 대해서는 이미 연구가 진행된 상태이다. 본 논문에서는 제어기가 분산화된 H-브릿지 멀티레벨 인버터에 각 셀의 스위칭 조건을 동일하게 유지하는 Level Shifted PWM을 적용하기 위해서 전압지령을 보정하는 방법을 사용하였고 시뮬레이션과 시험을 통해 제어기가 분산화된 H-브릿지 멀티레벨 인버터에 적용 가능함을 증명하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.2
• /
• pp.67-73
• /
• 2005

The thickness of a Si3N4 thin film with a 100m nominal thickness was measured by use of a Mach-Zehnder interferometer. The map of the phase-delay through the thin film was obtained by an interframe intensity-correlation-matrix method that could elliminate phase-shifting errors. After the spatial phase-shifting errors were treated with a least-squares method, the reference to surface of the phase map was estimated. The overall accuracy of the method was found to be 5nm.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.382-385
• /
• 2006

한국지질자원연구원은 1997년부터 새로운 에너지 자원으로 활용 가능성을 포함하고 있는 가스 하이드레이트를 조사하기 위해 동해 일원에서 탄성파탐사를 실시하고 있다. 탄성파 반사 자료로부터 가스 하이드레이트 부존여부를 확인하는 방법은 해저면과 평행하면서 위상이 반대로 나타나는 고진폭 반사파 BSR (Bottom Simulating Reflection)과 BSR상부에서의 진폭감소, 하부에서 진폭증가와 구간속도 감소 등을 들 수 있다. 여기에서는 가스 하이드레이트 탐사자료에 대한 일반자료처리와 함께 BSR을 포함하고 있는 탄성파 반사자료에 대해 코드 병렬화된 PSPI를 이용하여 깊이영역 구조보정을 실시하였다. 고용량 탐사자료로 구성된 탄성파 반사자료에 깊이영역 구조보정을 적용하기 위해서는 고성능 컴퓨터와 병렬처리 기술이 필요하다. PSPI(Phase Shift Plus Interpolation)법은 적은 컴퓨터 계산량과 효율성 그리고 주파수 영역에서 구조적으로 병렬화가 용이한 특성을 지니고 있어 구조보정에 많이 이용되고 있다. 여기에서는 MPI(Message Passing Interface)-LAM을 이용하여 병렬코드화된 PSPI를 개발하고 인공합성모델과 동해 가스 하이드레이트 깊이영역 구조보정에 적응하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.414-423
• /
• 2015

Array error analysis and correction of active array antenna are described in this paper. Array elements composed of radiator and TR(Transmit & Recive) module have error(magnitude and phase difference among array elements) which affects SLL(Side Lobe Level). Error affectedness level depends on ideal SLL according to antenna aperture weighting, number of array elements and antenna effective aperture. To satisfy required SLL, correction of array elements is necessary; adopted differently per errors, and weighted differently per shapes of antenna and required SLL. Errors of every individual element had been defined, performance of the antenna with or without error correction had been estimated and proved through near field test.