• Korean Journal of Optics and Photonics
• /
• v.32 no.4
• /
• pp.172-179
• /
• 2021

A near-normal-incidence ellipsometer (NNIE) is suggested as an optical critical dimension (OCD) measurement system that is highly sensitive to the bottom defect of a sample with high-aspect-ratio structured patterns. Incident light passes through a polarizer and a phase retarder in sequence, and the reflected light from the sample also passes through them, but in reverse order. The operating principle of this NNIE, where a single polarizer and a single phase retarder are shared by the incident and reflected light, is studied, and a method to determine the ellipsometric constants from the measured intensities at proper combinations of the azimuthal angles of polarizer and retarder is presented.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.5
• /
• pp.40-50
• /
• 1994

In this paper, the sensitivity compensation method for three-dimensional acoustic intensity probe in the higher frequency range has been studied. The measurement error in the higher frequency range is generated from the phase mismatch between microphone's signals of the probe. If the wavelength of sound signal measured is less than those of the distance between microphones of the probe, that is, the higher frequency of the sound signal, the bigger measurement error is generated. In this study, we proposed the compensation methods for one-dimensional acoustic intensity probe with two-microphones, and the efficiency of those methods were investigated by numerical calculation of computer. It was most effective method to compensate the phase mismatch between microphone for the acoustic intensity probe was investigated for the sound estimated. and the efficiency of this method in a three-dimensional probe was investigated for the sound wave travelling in the arbitrary direction by numerical calculation of computer. In this result, the efficiency was proved that, for the measurement error of 1dB or less with the three-dimensional probe of 60mm space, the frequency should be less than 1.2kHz without the error compensation method, but the frequency increased up to 2.8kHz with the error compensation method.

• Geophysics and Geophysical Exploration
• /
• v.14 no.3
• /
• pp.234-241
• /
• 2011

Recently, exploration and development of oil sands are thriving due to high oil price. Because oil sands reservoir usually exists as a thin layer, multicomponent VSP, which has the advantage of the high-resolution around the borehole, is more effective than surface seismic survey in exploring oil sand reservoir. In addition, prestack phase-screen migration is effective for multicomponent seismic data because it is based on an one-way wave equation. In this study, we examined the applicability of the prestack phase-screen migration for multicomponent RVSP data to image the thin oil sand reservoir. As a preprocessing tool, we presented a method for separating P-wave and PS-wave from multicomponent RVSP data by using incidence angle and rotation matrix. To verify it, we have applied the developed wavefield separation method to synthetic data obtained from the velocity model including a horizontal layer and dipping layers. Also, we compared the migrated image by using P-wave with that by using PS-wave. As a result, the PS-wave migrated image has higher resolution and wide coverage than P-wave migrated image. Finally, we have applied the prestack phase-screen migration to the synthetic data from the velocity model simulating oil sand reservoir in Canada. The results show that the PS-wave migrated image describe the top and bottom boundaries of the thin oil sand reservoir more clearly than the P-wave migrated image.

• Journal of KIISE:Software and Applications
• /
• v.31 no.4
• /
• pp.411-419
• /
• 2004

When the imaging object rotates in image plane during MRI scan, its rotation causes phase error and non-uniform sampling to MRI signal. The model of the problem including phase error non-uniform sampling of MRI signal showed that the MRI signals corrupted by rotations about an arbitrary center and the origin in image plane are different in their phases. Therefore the following methods are presented to improve the quality of the MR image which includes the artifact. The first, assuming that the angle of 2-D rotational motion is already known and the position of 2-D rotational center is unknown, an algorithm to correct the artifact which is based on the phase correction is presented. The second, in case of 2-D rotational motion with unknown rotational center and unknown rotational angle, an algorithm is presented to correct the MRI artifact. At this case, the energy of an ideal MR image is minimum outside the boundary of the imaging object to estimate unknown motion parameters and the measured energy increases when the imaging object has an rotation. By using this property, an evaluation function is defined to estimate unknown values of rotational angle at each phase encoding step. Finally, the effectiveness of this presented techniques is shown by using a phantom image with simulated motion and a real image with 2-D translational shift and rotation.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.3
• /
• pp.715-719
• /
• 1998

In this paper, we propose a color enhancement system which is based on the improvement of transition time problem and specific color detection stability. The proposcd system apply the time difference correction step to corrects time difference which is taken place at the transimission process between color signal and color subcarrier signal and to reduce detection errors. And also, we proposed stability method to improve transition time problem and detection efficiency as the control of reference color. The proposed system controls specific color when the mean difference value of detected voltages greater than the value of minimum discriminate voltages of two adjacent color signals. Thus, the color enhancement system improves detection efficiency and controls specific color from the color signal without overlapping of correction range.

• Korean Journal of Optics and Photonics
• /
• v.11 no.1
• /
• pp.19-24
• /
• 2000

Optical transmission characteristics of retardation film for obliquely incident light is calculated by using extended Jones calculus and it is geometrically interpreted on Poincare sphere representation as rotational transformation. The characteristics of a retardation film is that while the rotation axis is fixed at a point on the Equator of the Poincar sphere, the rotation angle varies with the direction of incidence. This property can be compensated by using a tandem arrangement of the two optical films whose optic axes do not coincident, and this method can be used for the improvement of the viewing angle characteristics of BTN cells. cells.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1784-1785
• /
• 2011

PS(Phase Shift) 방식을 이용하여 3차원 이미지 형상복원 시스템을 구현하였다. PS 방식은 위상을 이동시켜서 얻어진 강도를 arctan 시킴으로써 $-{\pi}{\sim}{\pi}$ 범위의 접혀진(wrapped) 위상을 얻을 수 있으며, 이러한 wrapped 위상을 위상 펼침(unwrapping) 알고리즘을 이용하여 불연속을 제거할 수 있다. 얻어진 위상 정보는 물체의 높이 정보에 비례하기 때문에 위상 분포로써 3차원 형상을 복원할 수 있다. Unwrapping 알고리즘에는 다양한 방식이 있지만 본 연구에서는 LabVIEW 프로그램을 이용하여 Goldstein 알고리즘을 구현하였으며, 감마(Gamma) 효과에 의한 노이즈를 줄이기 위하여 프로젝트와 카메라의 보정(calibration) 프로그램을 개발 및 적용하였다. 이와 같은 실험을 통하여 효과적으로 3차원 형상 정보를 얻을 수 있었다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.44-45
• /
• 2000

Shack-Hartmann 센서로부터 얻어진 기울기 정보로부터 파면을 재구성하고 분석하기 위해서는 각각의 점 영상에 대한 위상 구배로부터 파면의 위상을 재구성할 수 있는 수학적인 알고리즘이 필요하다. 파면의 위상을 재구성하기 위한 알고리즘은 Hudgin, Fried, Southwell이 제시한 세 가지 방법에 대한 연구결과가 가장 많이 알려져 있다. 본 연구에서는 CCD 카메라로부터 전송된 디지털 영상에서 각각의 점 영상의 중심점을 추출하여 점 영상의 이동정보로부터 수평과 수직방향의 기울기를 계산하고, 이를 바탕으로 최소제곱법(least-square fitting)을 사용하여 위상을 재구성하였다. 파면의 기울기 정보로부터 파면을 재구성하기 위해 기존의 이론을 바탕으로 행렬계산법을 사용하여 각각의 경우를 일반화하였고, 위상의 복구와 파면의 보정에 따른 해석적인 오차의 관계를 논의하였다. (중략)

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.347-349
• /
• 2010

탄성표면파 필터에 관한 여러 가지 모델링이 연구된 이후, 다양한 필터와 공진기가 신호처리용으로 사용되어, 많은 다른 모델들이 이를 분석하고 통합하기위해 유도되어 왔다. 탄성표면파 필터는 크기가 소형이고 제작이 간편하며, 주변의 전자회로와 조합하기 쉬운 장점이 있다. 비대칭의 진폭특성과 비선형 위상특성을 갖는 필터를 설계하고, 설계된 필터의 설계오차를 보정하기 위해서는 임의의 진폭 및 위상특성을 갖는 필터의 설계방법을 연구한다.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.222-225
• /
• 2003

본 논문에서는 six port 를 사용한 실시간 디지털 직접 변환 수신기를 소개하고 실제 six port 구조를 이용해 구현된 직접 변환 수신기의 성능을 분석한다. 제안한 알고리즘은 송신단과 수신단의 위상 오류를 보정하고 랜덤한 채널 잡음 환경에서도 성능의 저하가 크지 않다. 다음으로는 위상 오류 추정 방법을 사용하여 수신기에서의 성능 향상을 컴퓨터 시뮬레이션을 통해서 살펴보았다.