• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2007년도 한국컴퓨터종합학술대회논문집 Vol.34 No.1 (C)
• /
• pp.432-435
• /
• 2007

본 논문은 신원확인 수단으로 부각되어 관심이 높은 홍채인식에 대한 연구이다 홍채인식 시스템의 경우 홍채영역에 따라 각 영상들의 특징 값이 차지하는 비중이 서로 다르게 분포되어 있고 눈썹이나 조명에 의한 잡음으로 인하여 인식성능에 영향을 미친다. 이 경우 기존에 등록되어 인증된 사용자의 홍채영상일지라도 제대로 인식하지 못하거나 인증에 실패할 수 있으며, 실세계에서의 홍채영역 사용이 원활하지 못하게 된다. 그러므로 단일 생체인식 시스템에서 홍채인식을 할 경우, 중요한 특징을 그대로 유지하고 인식성능을 향상시키기 위해서 획득된 홍채 영상의 정규화와 전처리 과정을 거친 다음 홍채영역을 분할한 후 각 영역에서의 보정치 적용을 통한 특징추출 방법을 제안한다. 또한 웨이블릿 변환과 주성분 분석을 이용하여 인식 성능이 개선된 특징추출 방법임을 보인다.

• 감성과학
• /
• 제5권3호
• /
• pp.53-59
• /
• 2002

The surface fibers on the fabric is one of decisive factors which affects human sensory evaluation as well as heat and moisture transfer characteristics. In this study the length and distribution of surface fibers that are extruded from the fabric surface of the wool/wool blend fabrics (14 wool fabrics and 10 wool blend fabrics) and its contribution to subjective sensory evaluation were investigated. In order to quantify the length and distribution of surface fibers, image analysis and wavelet transform technique were introduced. Instant warm-cool feeling of touch, Q$\_$max/, and contact area were also measured and related to the quantified surface fibers. To figure out the effect of surface characteristics on sensory evaluation, human sensory responses to three adjectives which represent surface characteristics and warm-cool feeling of touch were obtained and analyzed. The relationship between the quantified surface fibers assessed by wavelet energy and both warm-cool reeling of touch, Qmax, and human sensory response were discussed.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2003년도 추계학술발표대회(상)
• /
• pp.183-186
• /
• 2003

인터프레임 웨이블렛 부호화(Interframe Wavelet Coding)는 3D 서브밴드 부호화라고도 하며, 기존의 DCT 기반 동영상 부호화 방식에 비해 압축 효율이 우수하고, 특히 스케일러빌리티 기능이 뛰어난 부호화 방법이다. 본 논문에서는 기존의 인터프레임 웨이블렛 부호화 방법에서 시간 밴드 영상에 대해 동일한 웨이블렛 필터를 사용하여 공간 웨이블렛 필터를 적용하던 것을, 시간 밴드 영상의 특성을 고려하여 로우 밴드와 하이 밴드에 서로 다른 웨이블렛 필터를 적용하는 방법을 제안하였다. 본 논문에서는 로우밴드에는 9/7 필터를 적용하고 하이 밴드에는 Haar필터를 적용하여 보았다. 이렇게 적용함으로서 부호과정에서 가장 많은 연산량을 필요로하는 역 웨이블렛 변환이 간단하게 되어 복호기의 복잡도가 감소하는 효과가 있다. PSNR 실험에서 기존의 9/7 필터만을 사용하는 경우와 비교한 결과 거의 차이가 없었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.172-174
• /
• 2005

Recently, a concern of power qualify increases because of electronic device development and well-being generation. Power quality problems such as voltage sag, harmonics, flicker etc. have adverse effects on electric devices. Therefore, power quality problems have been monitored. This paper studies a detection of voltage sag that is more severer than the others. A voltage sag has been monitored using rms or wavelet method. This paper proposes an advance detection method using wavelet. An error Of Start Point differs error of ending point. We use this difference. So, we respectively revise detection error. Also, we revise multiplying average error rate.

• 대한임베디드공학회논문지
• /
• 제7권5호
• /
• pp.277-284
• /
• 2012

To meet the usage of discrete wavelet transform (DWT) on potable devices, this paper implements 2-level DWT using a reference many-core processor architecture and determine the optimal many-core processor. To explore the optimal many-core processor, we evaluate the impacts of a data-per-processing element ratio that is defined as the amount of data mapped directly to each processing element (PE) on system performance, energy efficiency, and area efficiency, respectively. This paper utilized five PE configurations (PEs=16, 64, 256, 1,024, and 4,096) that were implemented in 130nm CMOS technology with a 720MHz clock frequency. Experimental results indicated that maximum energy and area efficiencies were achieved at PEs=1,024. However, the system area must be limited 140mm2 and the power should not exceed 3 watts in order to implement 2-level DWT on portable devices. When we consider these restrictions, the most reasonable energy and area efficiencies were achieved at PEs=256.

• 대한임베디드공학회논문지
• /
• 제7권4호
• /
• pp.173-179
• /
• 2012

In this paper, we propose an efficient architecture for 2D IWT using an existing 1D IWT. Lifting based IWT is the architecture of which a multiplier is replaced by adders and shift registers. The structure is relatively simple and modular. The proposed architecture to process an image size with 256x256 pixels consists of 16 adders, 8 shift registers, and some memories. By processing two rows at the same time, 2D sub-band coefficients can be calculated immediately after 1D sub-band coefficients have been processed. The architecture is designed so that each image can be inputted consecutively. The number of adders and shift registers is increased by twice comparing the existing architecture, but the memory size and the execution time are decreased by half. The proposed architecture is implemented using Verilog-HDL and simulated using iSim. It is synthesized and demonstrated at ISE for xc5vlx330 in RPS3K board.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.151-154
• /
• 2002

The objective of this study is to find the change of signal characteristics of matrix cracks due to the different specimen shapes. As the concept of the smart structure, monitoring of acoustic emission (AE) can be applied to inspect the fracture of the structures in operating condition using built-in sensors. To understand the characteristics of matrix crack signals, we performed tensile tests by changing the thickness and width of the specimens. This paper describes the implementation of time-frequency analysis such as wavelet transform (WT) fur the quantitative evaluation of fracture signals. The experimental result shows the distinctive signal features in frequency domain due to the different specimen shapes.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.170-173
• /
• 2003

음향방출 신호를 이용하여 목재 섬유판(fiberboards)의 위치표정의 유용성 유무를 실험적으로 검증하였다 위치표정의 정확도를 향상하기 위해 신호처리 방법중의 하나인 웨이블릿 변환 디노이징 기법을 활용하여 저주파수인 대칭모드(굽힘파)를 활용하고, 고주파수인 비대칭모드(팽창파)를 제거하여 신호를 재구성함으로써 섬유관의 위치표정시 문턱값 통과방법을 사용할 때 발생하는 도달시간차를 최소화 할 수 있음을 확인하였다. 디노이징 기법을 활용한 섬유판의 위치 표정과 굽힘강도에 대한 사상총수를 기초로 하여 목재 구조물 및 문화재의 건전성을 평가 할 수 있을 것으로 기대된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권1호
• /
• pp.95-102
• /
• 2007

The issues of preventive and condition-based maintenance, online monitoring, system fault detection, diagnosis and prognosis are of increasing importance. This study introduces a technique to detect and identify faults in induction motors. Stator currents were measured and stored by time domain. The time domain is not suitable for representing current signals, so wavelet transform is used to convert the signals onto frequency domain. The raw signals can not show the significant feature, therefore difference values between the signal of the health conditions and that of the fault conditions are applied. The difference values were transformed by wavelet transform and the features are extracted from the transformed signals. The dynamic time warping method was used to identify the fault type. This study describes the results of detecting fault using wavelet analysis.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.391-398
• /
• 2001

This paper presents the application method of a wavelet theory for identification of the structural dynamic properties of a bridge, which is based on the ambient vibration signal caused by the traffic loadings. The method utilizes the time-scale decomposition of the ambient vibration signal , i . e. the continuous wavelet transform using the Morlet wavelet is used to decompose the ambient vibration signal into the time-scale domain. The applicability of the proposed approach is verified through the reduced scale bridge and automobile system in the laboratory. The results of verification shows that the use of the Morlet wavelet to identify the structural dynamic properties is reasonable and practicable.