• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.6
• /
• pp.140-146
• /
• 2008

The damage evaluation method for framed structures using continuous wavelet transform (CWT) is proposed. CWT is applied to the response acceleration of a structure subjected to earthquake load to decompose the response acceleration corresponding to each scale, then the normalized energy value for each scale is calculated. The difference between the normalized energy curvature (NEC) in each node before and after damage indicates a damaged element, which makes it possible to assess the soundness of structural elements. As damage becomes more severe the difference in normalized energy curvature becomes larger. The NEC calculated from the signal corresponding to high scale in CWT analysis is found to be a good index that shows the location and severity of damage.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.55-62
• /
• 2012

EZW, also known as Embedded Zerotree Wavelet, is a technique that allows transforming original images into wavelet, then again compressing images using the transformed data. This algorithm demonstrates a simple structure and remarkable effectiveness. This paper has reformed the EZW to improve a compression efficiency. Fundamentally, EZW evaluates the priority level of wavelet-transformed data and stores them into four different categories considering the priority level of the data as well as their location information. The four categories are represented as the symbols P, N, Z, and T. Here, P and N correspond to the volume of data and the priority level whereas Z and T show the location information of data. Each letter is stored through the process of dominant pass. However, here is when the data of Z and T are stored redundantly which lead to unnecessary increase of data volume. In this paper, we propose a modified version of Embedded Zerotree Wavelet algorithm, which is designed to efficiently reduce the volume of redundantly stored data using four additionally inserted symbols. We name it EEZW, Extended Embedded Zerotree Wavelet. The proposed algorithm demonstrates the efficiency verified by a number of image and confirms an outstanding result through the PSNR(Peak Signal To Noise Rate) values, which measure their quality of images.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.525-534
• /
• 2013

Recently, mura defect inspection techniques are receiving attention in LCD production procedure since demands of TFT-LCD are growing. In this paper, we propose an automatic mura defect inspection method using gabor wavelet transform and DCT. First, we generate a reference panel image using DCT based method. For original panel image and generated reference panel image, we apply a gabor wavelet transform to eliminate texture information in images. Then, we extract mura defect regions from the difference image between gabor wavelet transform image of original panel and generated reference panel image. Finally, all mura defect regions are quantified to detect accurate mura defects. Experimental results show that our method is more accurate and efficient than previous methods.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.4
• /
• pp.310-319
• /
• 2010

In this paper, digital watermarking method using wavelet transform and quad-tree algorithm is proposed. The proposed algorithm transforms the input image by DWT(Discrete Wavelet Transform) and AWPT(Adaptive Wavelet Packet Transform), inserts the watermark by quad-tree algorithm and the Cox's algorithm. The simulation for performance analysis of the proposed algorithm is implemented about the effect of embedding watermark in each subband coefficient (HH, LH, HL) of DWT, each DWT level, and each AWPT level. The simulation result by using DWT is compared with that using AWPT in the proposed algorithm. In addition, the effect of embedding watermark in the lowest frequency band (LL) is simulated. As a simulation result using DWT, the watermarking performance of simultaneously embedding in HH, LH, and HL band of DWT(6 level) is better than that of different cases. The result of AWPT(3 level) improves the correlation value compared to that of DWT(3 level). In addition, insertion the watermark to the LL band about 30~60% of all watermarks improves the correlation value while PSNR performance decreases 1~2dB.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.1
• /
• pp.69-79
• /
• 2008

Prediction of ground condition ahead of tunnel face might be the most important factor to prevent collapse during tunnel excavation. In this study, a non-destructive method to evaluate the phase velocity in model rock mass using wavelet transform of surface wave was proposed aiming at ground condition assessment ahead of tunnel face. Model tests using gypsum as a rocklike material composed of two layers were performed. A Piezoelectric actuator with frequencies ranging from 150 Hz to 5 kHz was selected as a harmonic source. The acceleration history was measured with two accelerometers. Wavelet transform analysis was used to obtain the dispersion curves from the measured data. The experimental results showed that the near-field effects can be neglected if the distance between two receivers is chosen to be three times the wavelength. A simple inversion method using weighted factor based on the normal distribution was proposed. The inversion results showed that the predicted phase velocity agreed reasonably well with the measured one when the wavelength influence factor was 0.2. The depth of propagation of surface wave was from 0.42 to 0.63 times the wavelength. The range of wavelength varying with phase velocity in dispersion curve matched well with that estimated by inversion technique.

• Journal of KIISE:Software and Applications
• /
• v.27 no.10
• /
• pp.1046-1053
• /
• 2000

본 논문에서는 정규화된 웨이블렛 방법에 기반한 얼굴 인식 방법을 제안한다. 추출된 얼굴 영역의 크기를 정규화하고. 배경 영역을 제거하기 위해 이진화된 가우시안 윈도우를 사용하였으며, 또한 조명의 영향을 줄이기 위해 얼굴 영역의 히스토그램을 상세화하고, 왼쪽 부분의 밝기와 오른쪽 부분의 밝기를 평균하였다. 정규화된 얼굴 영역은 극좌표계로 표현하여 사각형의 형태를 가지게 하였다. 특징으로는 가보 웨이블렛 계수를 사용한다. 가보 웨이블렛 변환은 매개 변수와 정규화된 얼굴 영역의 해상도를 바꾸어 가며 여러 차례 적용하였다. 인식에 유용한 계수들을 선택하기 위해 FD 분석을 수행하였다. 선택된 특정들은 FD 값과 함께 인식에 사용되었다. 실험 결과를 보면 제안된 방법이 매우 유망하다는 것을 알 수 있다.

• Journal of IKEEE
• /
• v.13 no.1
• /
• pp.77-86
• /
• 2009

A wavelet Electrocardiogram(ECG) detector and its analog-to-digital converter(ADC) for low-power implantable cardiac pacemakers are presented in this paper. The proposed wavelet-based ECG detector consists of a wavelet decomposer with wavelet filter banks, a QRS complex detector of hypothesis testing with wavelet-demodulated ECG signals, and a noise detector with zero-crossing points. To achieve high-detection performance with low-power consumption, the multi-scaled product algorithm and soft-threshold algorithm are efficiently exploited. To further reduce the power dissipation, a low-power ADC, which is based on a Successive Approximation Register(SAR) architecture with an on/off-time controlled comparator and passive sample and hold, is also presented. Our algorithmic and architectural level approaches are implemented and fabricated in standard $0.35{\mu}m$ CMOS technology. The testchip shows a good detection accuracy of 99.32% and very low-power consumption of $19.02{\mu}W$ with 3-V supply voltage.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.279-282
• /
• 2007

본 논문에서는 컨투어렛과 주성분분석기법을 이용한 융합기법에 의한 얼굴인식 시스템을 제안한다. 제안된 방법은 우선적으로 컨투어렛변환에 의해 얼굴영상을 대역별, 방향성분별로 분해한 후, 주성분분석기법을 이용하여 방향성분별로 분할된 부영상에서 특징벡터를 각각 추출한다. 최종 단계에서는 각각의 대역별로 산출된 매칭도를 효과적으로 융합할 수 있는 융합기법을 이용하여 얼굴인식이 수행된다. 제안된 방법의 유용성을 보이기 위해 ORL 얼굴데이터베이스를 대상으로 실험하여 기존 방법인 PCA나 웨이블렛변환을 이용한 방법에 비해 향상된 결과를 보임을 확인한다.

• The Korean Journal of Applied Statistics
• /
• v.23 no.3
• /
• pp.595-607
• /
• 2010

This paper addresses the problem of reducing the speckle noise in SAR images by wavelet transformation, using a non-local means(NLM) filter originated for Gaussian noise removal. Log-transformed SAR image makes multiplicative speckle noise additive. Thus, non-local means filtering and wavelet thresholding are used to reduce the additive noise, followed by an exponential transformation. NLM filter is an image denoising method that replaces each pixel by a weighted average of all the similarly pixels in the image. But the NLM filter takes an acceptable amount of time to perform the process for all possible pairs of pixels. This paper, also proposes an alternative strategy that uses the t-test more efficiently to eliminate pixel pairs that are dissimilar. Extensive simulations showed that the proposed filter outperforms many existing filters terms of quantitative measures such as PSNR and DSSIM as well as qualitative judgments of image quality and the computational time required to restore images.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2636-2644
• /
• 2013

This paper is proposed a wavelet-based the order statistics MAD(Median Absolute Deviation) method of image fusion of Multi-image contaminated with visible image and infrared image. also The method of compared and defined the threshold the wavelet coefficients using MAD of the wavelet coefficients of the detail subbands was proposed to effectively fusion which of selected the high quality image of the two images. The existed fusion rule may be possible to get the distorted fusion image especially by the distortion in the relation between the pixel and indicator of two images in the existed fusion rules. In order to complement the disadvantage, the threshold of the proposed method sets up the image statistic and excludes the distortion. The hardware design is used FPGA of Xilinx and DSP system for the image fusion and compressed encoding of the proposed algorithm. Therefore the proposed method is totally verified by comparing with the several other multi-image and the proposed image fusion.