• Title/Summary/Keyword: 원환

Search Result 54, Processing Time 0.022 seconds

An Experimental Study on Reduction Effect of Scour Depth arounding Uniform Cylindrical Pier with Various Size of Circular Collar (원환 크기의 변화에 따른 균등원통교각 주위의 세굴심 감소효과에 관한 실험적 연구)

  • Sim, Ou-Bae;Song, Jai-Woo
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.3 no.2 s.9
    • /
    • pp.139-145
    • /
    • 2003
  • This study is to propose reduction effect of scour depth and a optimum size of circular collar through experimental analyses with various collar sizes. To do so, we carried out hydraulic model experiments. In the case of with considering the collar, the effect of reduction of scour depth increased according to the increase of collar size. When size of collar is 2 as the ratio of collar diameter(W) to pier diameter(D), scour depth is decreased about 67% and deposition height is increased about 70%. The optimal size of collar proposed in this study is W/D=2 by analyzing reduction effect of scour depth, size of scour hole, and deposition height.

Variation of Hydraulic Characteristics around a Cylindrical Bridge Pier with Circular Collar (원환 설치에 의한 원형교각 주위의 수리특성변화)

  • Jin, Byoung-Ho;Sim, Ou-Bae;Song, Jai-Woo
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.3 no.2 s.9
    • /
    • pp.147-154
    • /
    • 2003
  • In this study, hydraulic characteristics around bridge piers were analyzed with and without collar through a hydraulic model experiment. The analysis of stage variation in front and back side of pier showed that collar installation did not function as obstacle to the stream flow. Little variation of water level between front and back sides of pier was observed before and after collar installation(0.2cm in front side and 0.1cm in back side of pier). Also, result that analyze velocity variation in front and back side of pier, lateral velocity(u) and transverse(v) before and after collar installation exhibited no alteration in the front and back side of pier. About 16.72% and 15.83% of vertical velocities(w) were reduced for the condition of y/d=0.33 in the front side of pier and y/d=0.67 in the back side of pier, respectively. This experimental results suggest that the collar installation around pier can minimize the local scouring depth by preventing the downflow that cause the pier scour.

Experimental Study for Protection of Local Scouring around Bridge Pier in a Curved Channel (만곡부에 위치한 교각주위의 국부세굴 보호공에 관한 실험적 연구)

  • Choe, In-Ho;Park, Yeong-Jin;Song, Jae-Woo
    • Journal of Korea Water Resources Association
    • /
    • v.31 no.3
    • /
    • pp.269-277
    • /
    • 1998
  • Laboratory flume experiments to investigate the characteristics of the flows and local scour around circular bridge pier in a curved channel are performed. In this study, the effect of a circular collar device for controlling the depth of scour is examined. The scour depth with a collar is about 40% of the scour depth without collar in the straight course of the flume while it is about 44% of the scour depth without collar at the location of 150' in the curved channel. As the results of experiments using the collar of which diameter is twice of pier, the reduction of scour depth is the most effective in a straight channel when the location of collar is 0.2h( h:depth) below the channel bottom. And, the reduction of scour depth is the most effective in a curved channel when the location of collar is 0.1h below the channel bottom.

  • PDF

Synthesis, Design and Polymerization of 5-membered exo methylene Cyclic Acetals (이중결합을 가지는 5원환 고리화합물의 합성 및 중합)

  • Park, Jae-kyeung
    • Journal of the Korean Society of Industry Convergence
    • /
    • v.6 no.1
    • /
    • pp.17-21
    • /
    • 2003
  • 5원환 고리아세탈 화합물인 4-methylenes(4,5)을 합성하고 저온조건 하에서 중합반응을 조사한 결과, 선택적인 개환중합이 일어났다. 보통의 양이온 개시제를 사용한 결과 $-78^{\circ}C$에서 가교체가 얻어졌으며, $CH_3SO_3H$를 개시제로 사용하면 같은 조건에서도 주사슬과 곁사슬에 이중결합을 가지는 개환중합체가 얻어진다. 이 중합체는 반응성을 가지는 불포화기를 포함하고 있으므로 prepolymer로써 널리 사용될 수 있다.

  • PDF

Ring-opening Polymerization of an aliphatic seven-membered Cyclic Acetal (7원환 고리화합물의 개환중합)

  • Park, Jae-kyeung
    • Journal of the Korean Society of Industry Convergence
    • /
    • v.4 no.3
    • /
    • pp.253-255
    • /
    • 2001
  • 기능성고분자재료 중의 하나인 7원환 고리아세탈 화합물인 1,3-dioxepan-2-one(1)을 합성하고 고온조건 하에서 중합반응을 조사한 결과 선택적인 개환중합이 일어났다. 그러나 낮은 농도에서 작은 분자량을 가지는 고분자가 얻어졌으며 넓은 분자량 분포와 낮은 수율이 얻어지며 이것은 중압반응 도중에 분자 내에서 상호반응을 일으킴을 보여준다.

  • PDF

Catalytic Application of Metal-Organic Frameworks for Chemical Fixation of CO2 into Cyclic Carbonate (CO2로부터 5원환 탄산염의 화학적 고정화 반응을 위한 Metal-Organic Frameworks의 촉매적 응용)

  • Ji, Hoon;Naveen, Kanagaraj;Kim, Dongwoo;Cho, Deug-Hee
    • Applied Chemistry for Engineering
    • /
    • v.31 no.3
    • /
    • pp.258-266
    • /
    • 2020
  • The chemical fixation of CO2 into cyclic carbonates is considered to be one of the most promising way to alleviate global warming and produce fine chemicals. In this work, the catalytic applicability of metal-organic frameworks (MOFs) as porous crystalline materials for the synthesis of five-membered cyclic carbonate from CO2 and epoxides was reviewed. In addition, we have briefly classified the materials based on their different structural features and compositions. The studies revealed that MOFs exhibited good catalytic performance towards cyclic carbonate synthesis because of the synergistic effect between the acid sites of MOFs and nucleophile. Moreover, the effect of structure of designed MOFs and mechanism for the cycloaddition of CO2 were suggested.

Free vibrational analysis of a circular ring with a concentrated mass (집중질량을 가지는 원환의 자유진동 해석)

  • 홍진선;김석현;이장무
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.11 no.1
    • /
    • pp.170-176
    • /
    • 1987
  • This study is concerned with dynamic characteristics of a circular ring with a concentrated mass attached. The equations of motion are set up and are solved by using Laplace transformation. The ratio of a concentrated mass to the mass of circular ring is used as a parameter. Experiment was performed by employing impulse test and the results show good agreement with those of analysis. The results of this study can be utilized in vibrational analysis of axisymmetric shells with slight asymmetries.