• Journal of Korean Society of Steel Construction
• /
• v.14 no.1
• /
• pp.31-40
• /
• 2002

Free vibration of a thin-walled laminated composite beam is studied. A general analytical model applicable to the dynamic behavior of a thin-walled channel section composite is developed. This model is based on the classical lamination theory, and accounts for the coupling of flexural and torsional modes for arbitrary laminate stacking sequence configuration. i.e. unsymmetric as well as symmetric, and various boundary conditions. A displacement-based one-dimensional finite element model is developed to predict natural frequencies and corresponding vibration modes for a thin-walled composite beam. Equations of motion are derived from the Hamilton's principle. Numerical results are obtained for thin-walled composite addressing the effects of fiber angle. modulus ratio. and boundary conditions on the vibration frequencies and mode shapes of the composites.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.12
• /
• pp.1132-1139
• /
• 2008

The aim of this study is to apply shape optimization technique for the repair of aging airframe components, which may extend fatigue life substantially. Free-form optimum shapes of a cracked part to be reworked or replaced are investigated with the objective to minimize the peak local stress concentration or fatigue-damage. Iterative non-gradient method, which is based on an analogy with biological growth, is employed by incorporating the robust optimization method to take account of the stochastic nature of the loading conditions. Numerical examples of optimal hole shape in a flat plate are presented to validate the proposed method. The method is then applied to determine the reworked or replacement shape for the repair of a cracked rib in the rear assembly wing body of aircraft.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.124-129
• /
• 2011

An improved NDIF method is introduced to efficiently extract eigenvalues of two-dimensional, arbitrarily shaped acoustic cavities. The NDIF method, which was developed by the authors for the eigen-mode analysis of arbitrarily shaped acoustic cavities, membranes, and plates, has the feature that it yields highly accurate eigenvalues compared with other analytical methods or numerical methods (FEM and BEM). However, the NDIF method has the weak point that the system matrix of the NDIF method depends on the frequency parameter and, as a result, a final system equation doesn't take the form of an algebra eigenvalue problem. The system matrix of the improved NDIF method developed in the paper is independent of the frequency parameter and eigenvalues can be efficiently obtained by solving a typical algebraic eigenvalue problem. Finally, the validity and accuracy of the proposed method is verified in two case studies, which indicate that eigenvalues and mode shapes obtained by the proposed method are very accurate compared to the exact method, the NDIF method or FEM(ANSYS).

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.10
• /
• pp.960-966
• /
• 2011

An improved NDIF method is introduced to efficiently extract eigenvalues and eigenmodes of two-dimensional, arbitrarily shaped acoustic cavities. The NDIF method, which was developed by the authors for the eigen-mode analysis of arbitrarily shaped acoustic cavities, membranes, and plates, has the feature that it yields highly accurate eigenvalues compared with other analytical methods or numerical methods(FEM and BEM). However, the NDIF method has the weak point that the system matrix of the NDIF method depends on the frequency parameter and, as a result, a final system equation doesn's take the form of an algebra eigenvalue problem. The system matrix of the improved NDIF method developed in the paper is independent of the frequency parameter and eigenvalues and mode shapes can be efficiently obtained by solving a typical algebraic eigenvalue problem. Finally, the validity and accuracy of the proposed method is verified in two case studies, which indicate that eigenvalues and mode shapes obtained by the proposed method are very accurate compared to the exact method, the NDIF method or FEM(ANSYS).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.9
• /
• pp.773-779
• /
• 2014

A qualitative and quantitative analysis on flame dynamics is required to model combustion instability characteristics in gas turbine lean premixed combustors. The current paper shows the flame transfer function modeling results using CFD(Computational Fluid Dynamics) techniques for the flame dynamics study. It is generally known that flame shapes determine the basic characteristics of the flame transfer function. The comparisons of the modeled flame shapes with the measured ones were made using the optimized heat transfer conditions. Modeling results of the flame transfer function show the close behaviors to the measured data with a reasonable accuracy if the flame geometry can be exactly captured.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.6
• /
• pp.607-613
• /
• 2009

A new formulation of NDIF method to the algebraic eigenvalue problem is introduced to efficiently extract natural frequencies of arbitrarily shaped plates with the simply supported boundary condition. NDIF method, which was developed by the authors for the free vibration analysis of arbitrarily shaped membranes and plates, has the feature that it yields highly accurate natural frequencies compared with other analytical methods or numerical methods(FEM and BEM). However, NDIF method has the weak point that it needs the inefficient procedure of searching natural frequencies by plotting the values of the determinant of a system matrix in the frequency range of interest. A new formulation of NDIF method developed in the paper doesn't require the above inefficient procedure and natural frequencies can be efficiently obtained by solving the typical algebraic eigenvalue problem. Finally, the validity of the proposed method is shown in several case studies, which indicate that natural frequencies by the proposed method are very accurate compared to other exact, analytical, or numerical methods.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.137-137
• /
• 2011

펄스 직류 $BCl_3$ 플라즈마의 전기적 특성과 GaAs의 건식식각을 연구하였다. 공정변수는 펄스 직류 전압 (350~550 V), 펄스 직류 주파수 (100~250 kHz), 리버스 시간 (0.4~1.2 ${\mu}s$)이었다. 전기적 특성은 오실로스코프를 이용하여 분석하였다. 펄스 직류 전원의 경우 평균 전압이 일정하더라도 주파수가 커지거나 리버스 시간이 커지면 peak-to-peak 전압이 증가한다는 사실을 이해하였다. GaAs 식각 실험 후 샘플의 식각률, 식각 선택비, 표면 형상을 비교, 분석하였다. GaAs의 식각 결과는 식각 속도, 식각 선택비, 표면 형상, 잔류 물질 분석을 실시하엿다. 본 실험에서는 1대의 기계적 펌프만을 상ㅇ하여 진공 압력을 유지하였다. GaAs의 식각 속도는 10 sccm $BCl_3$를 사용한 경우 최대 0.4 ${\mu}m$까지 얻을 수 있었다. 감광제에 대한 최대 식각 선택비는 약 2.5 : 1이었다. BCl₃ 플라즈마의 경우 75 mTorr의 저진공 조건에서는 500 V, 250 kHz, 0.7 ${\mu}s$의 실험에서 가장 좋은 식각 특성을 얻을 수 있엇다. X-레이 광전 분석기 데이터에 의하면, 식각된 GaAs의 표면을 깨끗하였으며, 염소와 관련된 잔류 물질은 거의 발견되지 않았다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.581-581
• /
• 2012

나노스케일에서의 자구체(magnetic domain), 자화벽(magnetic domain wall)에 대한 연구가 활발하게 진행되고 있으며 특히 자화벽의 위치를 임의로 제어할 수 있는 기술을 응용한 메모리 소자에 대한 연구가 활발하다. 반면에 이러한 연구에 필수적인 자구체, 자화벽 이미징 장비는 매우 미비한 상황이다. 이와 같은 자성이미징(magnetic domain image), 자화벽(magnetic domain wall)을 연구하는데 있어 가장 핵심적인 장비가 SEMPA(Scanning Electron Microscopy with Polarization Analysis)이다. 일반적으로 SEM의 경우 고 에너지 빔의 전자 빔을 주사 시키고 이때 발생되는 이차 전자의 수를 2차원상의 영역에 따라 달라지는 비로 형상을 측정하게 된다. 이때 전자의 수 뿐만 아니라 이들의 spin polarization을 측정할 수 있다면 형상뿐 만 아니라 표면에서의 스핀 상태를 동시에 측정할 수 있게 된다. 기 개발된 W-filament source를 이용한 SEMPA는 field emission source에 비하여 전자빔의 세기가 약하며 이차 전자의 수도 적어 spin polarization 감도가 현저히 떨어진다. 또한 초고진공($1{\times}10^{-10}torr$)에서 사용할 수 없어 측정시료의 contamination을 방지할 수 없다. 이러한 문제점들을 보안하기 위하여 field emission source를 이용한 FE-SEMPA를 개발 중이며 2차전자의 spin polarization감도를 증가시키기 위하여 monte carlo simulation과 전산시늉등울 통해 스핀 검출기를 개발 및 연구결과를 발표하고자 한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.5
• /
• pp.48-57
• /
• 1994

The specific power output and thermal effeciency of any two-stroke engine are dependent on its scavenging behavior. Among the many factors which influence on the scavenging process, the cylinder head shape is one of the important factor. Hence in this study three different type models of cylinder head shape which are the cylindrical, the spherical and the arbitrary shape are studied to show the effects of the turbulent scavenging process in the cylinder with one inlet port, two side ports and one exhaust port. A modified version of KIVA-II which strip out of or add planes of cells across the mesh above the piston for flow simulation of two-stroke engine is used. The $k-{\varepsilon}$ turbulent model is used. The results show that the flow in a two-stroke engine cylinder of the spherical head shape among the three different type model is a desirable for efficient scavenging.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.8-13
• /
• 2018

Zirconium potassium perchlorate(ZPP) is an igniter composed of potassium perchlorate as an oxidizing agent and zirconium as a fuel with a Viton binder. ZPP has been used to provide an ignition source in the aerospace, propulsion, and automotive industries. This study investigates the manufacturing process and characteristics of ZPP, such performance and shape/calorimetry/pressure characteristics with respect to pyrotechnic mechanical device(PMD). During the production of ZPP, the mixing process was designed to produce uniform particle size and shape by mixing the raw materials at high speed.