References
- Lincoln, J. W., 1997, Aging Aircraft-USAF Experience and Actions, Proc. The First Joint DoD/FAA/NASA Conf. on Aging Aircraft, Ogden, UT.
- McDonald, M. and Heller, M., 2004, “Robust Shape Optimization of Notches for Fatigue-Life Extension,” Struct and Multidisc Optim, Vol. 28, No. 1, pp. 55-68 https://doi.org/10.1007/s00158-004-0437-5
- Wu, Z., 2007, “On the Optimization Problem of Fillets and Holes in Plates with Curvature Constraints,” Struct and Multidisc Optim, Published Online
- Kristensen, E. S. and Madsen, N. F., 1976, “On the Optimum Shape of Fillets in Plates Subjected to Multiple in-Plane Loading Cases,” Int J Numer Methods Eng, Vol. 10, pp. 1007-1019 https://doi.org/10.1002/nme.1620100504
- Xie, Y. M. and Steven, G. P., 1992, “Optimal Design of Multiple Load Case Structures Using an Evolutionary Procedure,” Finite Element Analysis Research Centre, University of Sydney, Australia
- Herskovit, J., Dias, G. P. and MotaSoares, C. M., 1996, “A Full Stress Technique for Structural Optimization,” Appl Math Comp Sci J Shape Optim Sci Comp, Vol. 6, No. 2, pp. 303-319
- Fanni, M., Schnack, E. and Grunwald, J., 1994, “Shape Optimization of Dynamically Loaded Parts,” Int J Press Ves Pip, Vol. 59, pp. 281-297 https://doi.org/10.1016/0308-0161(94)90162-7
- Grunwald, J. and Schnack, E., 1997, “A Fatigue Model for Shape Optimization,” Struct and Multidisc Optim, Vol. 14, No. 1, pp. 36-44 https://doi.org/10.1007/BF01197556
- Chaperin, P., Jones, R., Heller, M., Pitt, S. and Rose, F., 2000, “A Methodology for Structural Optimization with Damage Tolerance Constraints,” Engineering Failure Analysis, Vol. 7, pp. 281-300 https://doi.org/10.1016/S1350-6307(99)00014-X
- Yu, Y. and Kwak, B. M., 2003, “Development of a CAD-Based General Purpose Optimal Design and Its Application to Structural Shape for Fatigue Life,” The 2003 Autumn Conference of KSME, pp. 1340-1345
- Park, J. K., Lee, C. J. and Lee, S. S., 2002, “Weight Reduction and Fatigue Life Estimation of Aircraft Structure Through Optimization Design,” The 2002 Association Symposium of KSME, pp. 42-47
- Mattheck, C. and Burkhardt, S., 1990, “A New Method of Structural Shape Optimisation Based on Biological Growth,” International Journal of Fatigue, Vol. 12, Issue 3, pp. 185-190 https://doi.org/10.1016/0142-1123(90)90094-U
- Norman, E. D., 1999, Mechanical Behavior of Materials, Pearson Prentice Hall, pp.443-454
- Haugen, E. B., 1980, Probabilistic Mechanical Design, Wiley, New York, Appendix 10-B
- Baker, A. A., Rose, L. R. F. and Jones, R., 2002, Advances in the Bonded Composite Repair of Metallic Aircraft Structure, Elsevier, Boston