• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.835-837
• /
• 2017

In this paper, manufacturing processes of cylindrical composite lattice structures using filament winding method was described. Cylindrical composite lattice structures were manufactured in accordance with four major steps. Silicon mold of lattice shape was installed on mandrel and then continuous fiber was wound on silicon mold. After winding process, in order to ensure the same thickness for all regions, compression process was done for its intersection parts. Finally, the composite lattice structure was demoulded after curing in oven. It was found that the manufactured cylindrical composites lattice structure had 2.4% of dimensional error compared to the design requirements.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.217-218
• /
• 2011

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.435-436
• /
• 2010

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.10a
• /
• pp.10-10
• /
• 1999

금속성형공정은 칩의 발생 없이 금속의 모양을 큰 소성변형으로 유용한 임의의 형태로 변화시키는 금속가공의 한 분야로써 제품을 생산함에 있어서 생산에 소요되는 시간을 최소로 줄이면서 기계적 성질이 우수한 제품을 생산하는 방법이다. 소성가공 공정에서 성형하중은 금형의 파손 및 마모에 영향을 미치고, 금형이 과도한 탄성변형으로 인한 제품의 치수 정밀도 저하시키기 때문에 성형하중 저감 설계는 소성가공 공정 설계에서 중요한 인자로 작용하고 있다. 원통형 제품을 성형하는데 주로 이용되고 있는 압출공정은 펀치 진행 방향과 동일한 방향으로 제품이 성형되는 전방압출 공정과 펀지 진행 방향과 반대로 제품의 성형되는 후방압출 공정으로 구분된다. 후방압출공정은 튜브 형성의 제품, 포장용 캔 및 변속장치 부품등을 생산하는데 주로 사용되는 공정으로서, 우수한 표면상태, 치수정밀도 및 향상된 기계적 성질을 얻을 수 있으며 높은 생산성과 낮은 제조원가를 얻을 수 있는 장점이 있다.

• Design & Manufacturing
• /
• v.2 no.2
• /
• pp.33-37
• /
• 2008

This paper describes the optimization of injection molding conditions to minimize sink marks. Sink marks, which refer to a small depression on the surface opposite a thick wall thickness, are often encounted in injection molded plastic parts. Part geometry, material properties and processing conditions during injection molding can affect the sink mark depth. We designed the runner system which is possible balanced filling to cavities using CAE program and then obtained optimal processing conditions by Taguchi's Robust Design technique. By actual injection molding using optimized mold and molding conditions, it confirmed that sink mark depth decreased zero compared to 1mm level in the conventional mold and process.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.10
• /
• pp.1144-1148
• /
• 2012

Process conditions for generating nano patterns handle different process according to the pattern characteristics, and different process data according to patterns in questions. To efficiently find optimal process conditions for generating nano patterns, process data by experiment is needed consideration of the pattern characteristics concerning the equipment. In particular, coating methods of a cylindrical mold differ from it of a flat plate because of viscosity of coating materials. Also the coating thickness affects nano process and pattern line width. So coating method of coating thickness for cylindrical mold is very important on nano pattern generating. In this study, a method is proposed for coating Photo Resist through the spray in order to coat cylindrical mold and measuring the thickness of coating using measuring tip considering the size of cylindrical mold because there is no method in the existing SEM. The proposed method is applied to a real printed electronics system to verify its accuracy and efficiency.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.10
• /
• pp.1021-1028
• /
• 2015

Subminiature lenses are currently widely used in mobile phone cameras and are usually produced by injection molding. The lens molding process has the unique feature of a runner volume that is much larger than the part volume, and this feature should be considered when determining the mold design and molding conditions. In this study, a shell-type runner was proposed as an alternative to the conventional cylindrical runner used for lens molding. An injection molding simulation was performed by applying the proposed shell runner, and the simulation results were compared with those from the cylindrical runner case. It was found that the shell runner could considerably reduce the runner cooling time with only a slight increase in the injection pressure. The effect of the runner thickness was then investigated numerically in terms of the mold filling and cooling characteristics, from which an optimal runner thickness could be determined.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.95-95
• /
• 2003

특정한 마찰 또는 윤활조건 하에서 변형율 속도가 마찰인자에 미치는 영향을 관찰하기 위하여, 약 1$\times$$10^{-3}$/sec, 1$\times$$10^{-2}$/sec, 1$\times$$10^{-1}$/sec에 해당되는 3종류의 변형율 속도에서 평활금형, 흑연계윤활제 및 2황화 몰리브덴계 윤활제에 대한 마찰인자를 상온에서 각각 측정하였다. 측정방법으로서는 외경, 내경 및 높이 비가 6 : 3 : 2인 Al 6061 연주재 ring시편을 공칭변형율 65%까지 약 10% 씩 단속적으로 압축한 후 재윤활 하여주는 단속적 상온 압축시험 방법을 적용하였다. 측정결과, 변형율 속도가 증가함에 따라 윤활제를 사용하지 않은 평활금형에서의 마찰인자는 0.25에서 0.31로 증가, 흑연계 윤활제 적용시에는 0.23에서 0.15로 감소하는 경향을 각각 나타내었고, 2황화 몰리브덴계 윤활제 적용시에는 각각의 변형속도에서 측정된 인자는 0.09-0.10 범위 내로써 마찰인자에 미치는 변형율속도 영향이 아주 미미함을 보여주었다. 본 연구 결과에서는 이 측정결과로부터 각각의 변형속도에서 Al 6061 연주재의 원통형 압축시편으로부터 구한 압축측정응력으로부터 상온유동응력을 구하여 상호 비교하고자 하였다.

• Design & Manufacturing
• /
• v.15 no.3
• /
• pp.13-18
• /
• 2021

In plate forming technology, cylindrical drawing process is widely used in industry due to technological development. In this study, we used stainless steel 3042B and stainless steel 304J1, which are the most commonly used materials in the production of cold and hot water tanks for water purifiers, among cylindrical drawing products. Under the same conditions, the thickness of the sidewall of the product formed by drawn experiment was studied. As a result of the experiment, the bottom thickness of stainless steel 304J1 was considered to be thick. It is judged that the defect rate can be reduced by changing the breaking phenomenon of the floor surface of the cold and hot water bottles to the material of stainless steel 304j1. Stainless steel 304 2B material shows a sharp change in thickness from punch corner R to sidewall position, while stainless steel 304J1 material showed a uniform change from punch corner R to sidewall position. Stainless steel 304J1 material is considered to improve the clamping of the product in the process of extracting the product after hand drawing. The appearance of stainless steel 3042B products is considered to produce more wrinkles in the flange, which exerts greater tensile force on the sidewall during molding, resulting in uneven sidewall thickness.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.556-561
• /
• 1988

Shrink-rings (Stress-rings) are used in the fabrication of dies for cold forming and powder compaction processes to increase the allowable pressures for a given die material. Optimum procedures are to minimize a die thickness under the conditions that the stress distributions in the die and stress-rings utilize fully the strength available in each of the die elements. This paper proposes a new approach, where the maximum allowable shrinking pressures are calculated on shrinkage plans in the radial direction and the fractional shrinking pressures below the maximum allowable pressures are used as the design values. Two criteria for the optimal die design are used: Maximum shear stress limit for one-piece dies and zero tensile stress limit for combined dies. A computer program, DIECOM, is developed for illustrating the computer-aided design procedures. Finally, examples for each case are presented in this paper.