• 한국안전학회지
• /
• 제33권3호
• /
• pp.52-57
• /
• 2018

The pile construction method is changing from the pile driving operation to the injected precast pile method. It is to prevent environmental damage and to minimize complaints caused by noise. Therefore, economic alternatives optimized for the injected precast pile method are required. In this study, the enhanced spun reinforced concrete piles manufactured by high strength materials were proposed. Experimental tests were conducted to evaluate their structural safety and nonlinear finite element analysis was performed to improve the reliability of experimental results. The experimental results and the analytical results were in good agreement with each other and the proposed enhanced spun reinforced concrete pile has better performance than that required by the design. However, the performance of the joint using the existing method used in the PHC pile was considered to be insufficient.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 가을 학술발표회 논문집
• /
• pp.228-233
• /
• 1992

The objective of this report is to investigate the effect of factors on the centrifugal compaction of concrete piles with design of experiments. The analysis of sludge and measurement of compressive strength of specimens compacted by centrifugal of vibration were performed. As a result, there were some effective factors like unit content of cement, high and middle centrifugal force and time. It was considered that the process of centrifugal compaction of concrete piles could be optimized with these results.

• 대한기계학회논문집B
• /
• 제28권4호
• /
• pp.467-474
• /
• 2004

A large-eddy simulation is performed for turbulent flow in a concentric annulus with the inner wall rotation at Re$\sub$Dh/=8900 for three rotation rates N=0.2145, 0.429 and 0.858. Main emphasis is placed on the inner wall rotation effect on near-wall turbulent structures. Near-wall turbulent structures close to the inner wall are scrutinized by computing the lower-order statistics. The anisotropy invariant map for the Reynolds stress tensor and the invariant function are illustrated to reveal the altered anisotropy in turbulent structure. Probability density functions of the splat/anti-splat process are explored to develop a sufficiently complete picture of the contributions of the flow events to turbulent production. The present numerical results show that the altered turbulent structures may be attributed to the centrifugal instability, which leads to the augmentation of sweep and ejection events.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.503-506
• /
• 2002

BSCCO 2212 HTS was fabricated by CFP(centrifugal forming process). The powder was initially ground in the mixing ratio of 2:2::1:2 with 10% of SrSO$_4$. The temperature increased up to 1035$^{\circ}C$ and 1200$^{\circ}C$ for melting. The melt was poured into the preheated and rotating copper mould from 200 to 600$^{\circ}C$. The specimen was not broken by thermal impact when the melting temperature was over 1050$^{\circ}C$ and copper mould was preheated over 400$^{\circ}C$ for 30min. A tube type of specimen was annealed at 840$^{\circ}C$ or 860$^{\circ}C$ in oxygen atmosphere for 24hours. Typical microstructure was analyzed in terms of CFP parameters by XRD, SEM, and EDS and also superconducting characteristics were compared.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.211-215
• /
• 2000

Bi-2212 HTS tube was fabricated by CFP(Centrifugal Forming Process). Slury was prepared in the mixing ratio of 8:2 between powder and binder and ball-milled for 24 hrs. Slurry was initially charged into the rotating mold with 300${\sim}$450 rpm and heated at the temperature ranges of 840${\sim}$860$^{\circ}$C for partial melting to finally obtain a uniformly textured tube shape. It was observed the plate-like grains with more than 20 ${\mu}$m were well oriented along the rotating axis and the measured T$_c$ was around 67K. In this paper we will discuss and analyze the tube characteristics depending on many different processing parameters such as, powder composition, binder mixing ratio between powder and binder, motor speed, heating temperature and etc.

• 한국전기전자재료학회논문지
• /
• 제13권9호
• /
• pp.801-804
• /
• 2000

High-temperature superconductor of Bi-2212 system was fabricated by CFP(Centrifugal Forming Process). To make a uniform specimen slurry was prepared in the ratio of 7:3(powder : binder) and ball milled for 24 hours. Milled slurry was charged into a rotating mold with 450 rpm and dried at room temperature. Then the specimen was performed binder burn-out at 35$0^{\circ}C$ and heated for partial melting to 86$0^{\circ}C$. XRD analysis of most specimens were shown 2212 phase and observed a local plate shped microstructure with a well aligned c-axis direction from SEM images. Measured T$_{c}$(Critical temperature) was about 64 K.K.

• 한국분말재료학회지
• /
• 제19권4호
• /
• pp.304-309
• /
• 2012

The purpose of our study was to develop the fabrication method of porous diatomite ceramics with a porosity gradient by centrifugal molding. The processing variables of centrifugal molding were derived from Stoke's law of sedimentation, which were the radius of the particles, the acceleration due to centrifugal molding and the dynamic viscosity of the slurry. And these could be controlled by ball-milling conditions, centrifugal conditions, and the addition of methyl cellulose, respectively. The effects of processing conditions on the gradient pore structure of diatomite were investigated by particle size analysis, scanning electron microscope, and mercury porosimeter.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.189-192
• /
• 2000

High-temperature superconductor of Bi-2212 system was fabricated by CFP(centrifugal forming process). To make a uniform specimen slurry was prepared in the ratio of 7:3(powder:binder) and ball milled for 24 hours. Milled slurry was charged into a rotating mold with 450 rpm and dried at room temperature. Then the specimen was performed binder burn-out at 35$0^{\circ}C$ and heated for partial melting to 86$0^{\circ}C$. XRD analysis of most specimens were shown 2212 phase and observed a local plate shaped microstructure with a well aligned c-axis direction from SEM images. T$_{c}$(Critical temperature) of Bi-2212 was 64K.K.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.37-40
• /
• 2008

최근 급속한 속도로 변화하는 현대 사회에서의 건설 현장에서는 공기 단축 및 자재의 절감을 통한 공사비 절감이 절실히 요구되고 있는 실정이다. 현재 현장에서의 거푸집 공사기간이 전체 공사기간의 1/4정도 차지하고 있으며, 공사비는 전체 공사비의 $15{\sim}20%$를 차지하고 있다. 이에 공기단축, 거푸집 자재의 절감 및 거푸집 폐자재의 처리에 대한 어려움을 줄일 수 있는 중공PC 반건식 기둥의 사용성 및 구조적 성능을 평가하고자 한다. 중공PC기둥은 전단보강근이 배근된 상태로 피복두께 만큼 공장에서 제작되어 지므로 품질관리 및 부재의 정밀도 등 여러 이점이 있지만, 코아 부분은 현장에서 후 타설 하여야 하므로 중공PC와 코아 콘크리트 간의 부착성능이 기둥의 압축거동에 미치는 영향에 대한 검증이 필요하다. 따라서 본 연구에서는 중공PC와 코아 콘크리트 간의 부착성능 및 압축거동성능을 평가하고자 기존 철근콘크리트 기둥 1개와 코아 콘크리트의 압축강도가 다른 중공PC 기둥2개를 제작하여, 철근 콘크리트 기둥과 중공PC기둥의 압축거동성능에 대하여 비교 분석 하고자 한다.

• 한국건설순환자원학회논문집
• /
• 제6권3호
• /
• pp.222-227
• /
• 2018

최근 콘크리트 전주의 20~30년 이상 경과로 인한 노후화와 각종 자연재해로 인하여 전주의 손상/파괴로 인해 유지 보수에 대한 요구가 증가하고 있다. 이를 위해 최근 전 세계적으로 구조물에 발생한 균열을 스스로 치유하여 유지보수비용을 감소시킬 수 있는 자기치유 콘크리트 기술의 연구가 활발하게 이루어지고 있다. 이에 본 논문에서는 Fly ash, GGBS, CA 등이 혼입된 변수의 균열자기 치유 콘크리트를 이용하여 10m 크기의 실제 전주 10개를 제작하여 휨강도실험을 수행하였다. 고로 슬래그를 첨가한 콘크리트의 압축강도가 우수한 것으로 나타났으나, 플라이 애시를 첨가한 콘크리트는 기준강도에 다소 미달하는 것으로 나타났다. 또한 실험체의 균열하중은 KS F 4304 기준을 만족하였으며, 하중-처짐 및 변형률 관계의 경우, 플라이 애시를 첨가 실험체의 경우에는 유사한 거동을 보였지만, 고로 슬래그가 함유된 실험체의 경우 균열발생 후 결정촉진제가 혼입된 실험체는 대량의 변형률이 발생하는 것으로 나타났다.