• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.245-254
• /
• 2007

The on-board telemetry system of KSLV-1 transmits telemetry signal for the launch vehicle and satellite to ground telemetry system in real time. In ground telemetry system, antenna system acquires telemetry signals and transfers these to data processing system. Data processing system processes and recordes telemetry data and distributes it to each mission operator in order to monitor it the operation goes well or not. This document describes the configurations and functions of data processing system designed for efficient and appropriate processing of telemetry data.

• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.107-115
• /
• 2011

The line-telemetry data processing system is necessary for monitoring the status of each onboard systems of KSLV-I upper stage during the ground tests and launch preparation. The mission of line-telemetry system is to provide reference telemetry data and to monitor the status of upper stage. The line-telemetry data processing system consists of a PCM acquisition/processing server, a system management server, and 9 monitoring consoles. In this paper, we will describe the overview of onboard remote measurement system, the design of the line-telemetry data processing system, anomaly setup information for indicating alarm signal in case of abnormal occurrence, and the result of the ground test and flight test.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.167-178
• /
• 2003

The design on the Telemetry Ground System for launch of KSLV(Korea Space Launch Vehicle) in the korean Space center has been conducted in this study. For the optimized system design, first of all, the system deployment plan reflecting the topographic and geographic environments of the space center and launch vehicle characteristics has been developed. The RF link budget analysis for the maximum tracking range, requirement for receiving subsystem including antenna subsystem, requirement for data processing subsystem are also analyzed based on the On-Board Telemetry characteristics and launch vehicle parameters. Based on those analysis, telemetry ground system containing tracking/receiving subsystem, recording subsystem and data processing subsystem, timing subsystem, calibration subsystem and monitoring and control subsystem are designed. Futhermore, the analysis for the maximum permissible data latency and communication protocol between each telemetry station and control center are conducted and the entire system is designed so that the major telemetry parameters selected to the best quality are provided in real time to the control center(RCC, RSC) for the launch mission operation.

• Journal of Advanced Navigation Technology
• /
• v.26 no.1
• /
• pp.1-8
• /
• 2022

Telemetry system is a system that measures and transmits status information in the aircraft to the ground. The data received from the ground is information for monitoring the state of the aircraft, and can be checked and analyzed in real time through the test program. Data processing test system for telemetry currently in operation is built to transmit data using wired communication and perform test. As smart devices become popular due to the continuous development of information and communication technology, wireless communication networks are becoming important, and technologies for improving performance are steadily being developed. In this paper, we suggests and builds data processing ground test system for telemetry using wireless communication(Wi-Fi) that can be checked through smart devices such as tablets, in order to break away from the existing method and apply future-oriented technology. Finally, the suggested test system performance was proved by testing in various environments by linking test equipment and test program.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.73-79
• /
• 2012

Because the contact time between satellite and ground station is very limited in LEO (Low Earth Orbit) satellite, all telemetry data generated on spacecraft bus are stored in a mass memory and downlinked to the ground together with real time data during the contact time. The mass memory is initialized in the first system initialization phase and the page status of each memory block is generated step by step. After the completion of the system initialization, the telemetry data are continuously stored and the stored data are played back to the ground by command. And the memory scrubbing is periodically performed for correction of single bit error which can be generated on harsh space environment. This paper introduces the mass memory operation method for telemetry processing of LEO satellite. It includes a general mass memory data structure, the methods of mass memory initialization, scrubbing, data storage and downlink, and mass memory management of primary and redundant mass memory.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.200.1-200.1
• /
• 2012

저궤도 위성은 크게 탑재체(Payload) 와 본체(Bus System)로 구성된다. 버스시스템은 다시 여러 서브시스템으로 나뉘는데 그 중의 하나가 원격측정명령계이다. 원격측정명령계는 위성의 각 서브시스템에 대한 정보를 텔레메트리를 사용하여 지상으로 전송하고 지상으로부터 커맨드를 받아서 이에 대한 명령을 수행한다. 이 때 S 대역 송수신기를 통해 RF로 변복조 되어 지상과 통신을 하게 된다. 보통 저궤도 위성의 송수신기는 레인징 기능을 제공하는데 이는 위성의 궤도를 예측하는데 사용된다. 위성의 궤도를 예측하기 위해서는 위치를 알아야 하는데 이 때 지상국에서 일정한 톤 신호를 위성으로 보내 되돌아오는 신호를 측정하여 위상차를 통해 거리를 측정하게 된다. 위성에 탑재되는 송수신기는 설계상 고유의 레인징 신호 지연 값을 가지게 되는데 이는 위성 발사 후 위성과의 거리측정 시 계산에 영향을 미치게 된다. 때문에 이에 대한 정확한 값을 미리 획득하여 발사 후 위성 궤도 예측에 사용되어야 한다. 본 논문에서는 한국항공우주연원에서 개발한 저궤도 위성의 송수신기를 사용하여 정확한 레인징 측정방법을 통해 결과 값을 제시하여 레인징 성능을 확인하고 또한 장기간에 걸친 모니터링을 통해 경향을 파악하여 송수신기의 성능을 확인하여 추후 이를 지상국과 위성사이의 통신에 활용할 수 있게 한다.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.53-53
• /
• 2003

과학위성 1호는 기존의 우리별 1,2,3호의 개발경험을 바탕으로 기술 습득과 독자 개발의 단계를 거쳐 기술의 최적화와 동시에 원자외선 분광기, 우주과학 탑재체, 원격 자료 수집 등의 우주 환경 측정 및 지상 생명체 탐사의 임무를 수행하기위한 최초의 국내 위성이다. 과학위성 1호 지상국 시스템은 과학위성 1호의 맡은바 임무를 원활히 수행할 수 있도록 각종 명령이나 프로그램을 위성으로 송신하여 위성을 조정하고, 위성의 건강상태를 파악할 수 있는 원격검침정보와 탑재체로부터 측정된 실험자료를 수신하며, 수신된 모든 자료를 저장, 처리 및 관리하여 위성의 상태를 정상적으로 유지하고 수신 자료를 요구하는 사용자들에게 분배하기 위한 목적으로 개발되었다. 본 연구에서는 과학위성 1호 지상국 시스템의 개발 및 설치에 관한 전반적인 사항에 대하여 살펴보았다.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.45-50
• /
• 2002

A conceptual design on the link budget of TC&R RF subsystem which transfers command and telemetry data as RF signal between the ground system and the 2005SAT spacecraft is presented in this paper. In order to perform the analysis of the link budget, we divided the analysis process into two processes, i.e., uplink and downlink process. For the uplink the power flux density at the spacecraft and the margin of the command receiver are calculated. In the case of the downlink the downlink EIRP and the margin of C/ No and Eb / No at the ground station are calculated. Through the uplink performance analysis, the power at the command receiver has well efficient margin, and the margin of C/ No and Eb / No is also fully proper for the downlink case.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.2
• /
• pp.3-9
• /
• 1994

Telemetry system which is mounted on the scientific sounding rocket KSR-420S transmits the informations about the performance of flighting rocket - distribution of the strain and temperature, accleration, pressure, velocity,attitude etc. - , the status of onboard circuit operating and measured data for scientific research such as ozone, ionosphere, x-ray etc. In this paper, PCM / FM telemetry system which was mounted on the KSR-420S is described.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.96-101
• /
• 2003

Korea Sounding Rocket(KSR)-III onboard telemetry system has acquired various data from subsystems and sensors in the rocket, and radiated PCM/FM data using two S-band antennas during the flight. Simultaneously， it is necessary that the ground receiving systems track the rocket, and receive and decode telemetry data. Also post processed telemetry data are needed to be broadcasted on ethernet network in real time. Range safety display system displays flight trajectory using telemetry data in mission control center, and so flight manager makes a decision for flight termination from the trajectory This paper describes operating technique about telemetry reception, the development for the realtime data processing system, and the results for telemetering reception on fight test. We telemetered, processed, and broadcasted numerous telemetry data during the flight test successfully.