• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.1
• /
• pp.83-88
• /
• 2011

There are various environmental conditions under which ship may navigate over ocean or in harbor. Ship's torque and speed change frequently under the voyage conditions. In this case, harmonics is created in the electrical power systems. The major adverse impacts of voltage and current harmonics in the electrical power systems on generator, transformer, converter, inverter and propulsion motor lead to the increase of machine heating caused by iron and copper losses which are dependent on frequency. In this paper, an analysis of THD(total harmonic distortion) for currents and voltages in the propulsion equipment was carried out. The THD and torque ripple in the input currents of the propulsion motor have been confirmed by the simulation results.

• Journal of Navigation and Port Research
• /
• v.38 no.1
• /
• pp.59-64
• /
• 2014

As global warming continues, the rate of ice melting in polar regions is increasing rapidly. The interest related to north polar route is increasing among not only countries near Arctic ocean but also the other countries, In the past, the classification society rule related to a design and operation of ship operating in polar area has been primarily amended by Russia, Norway and Finland located near Artic area. However recently International Maritime Organization decided to legislate the Polar Code to ensure safety of a ship operating in Arctic and Antarctic Ocean, and it is scheduled to be completed until 2014. The present paper focuses on the survey of the current enactment trends of Polar Code and suggests the confrontational strategy in related organization.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.4
• /
• pp.111-116
• /
• 2007

This study is aimed to analyze the accuracy of depth information of reservoir using the robot-ship equipped with GPS and echosounder. The accuracy of depth measurements by sounding data was analyzed according to change of robot-ship's speed in the water. The field experiment results showed that as robot-ship's speeds were slow, accuracy of sounding data were increased. Until Robot-ship's speed was up to 5 km/hr, the accuracy of sounding data were included reliable section of normal distribution.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.369-377
• /
• 2014

In this paper, to recognize the collision behavior between a submerged floating tunnel(SFT) and underwater navigation vessel(UNV), both structures are modeled and analyzed. The SFT of collision point is modeled tubular section using concrete with steel lining. The other part of SFT is modeled elastic beam elements. Mooring lines are modeled as cable elements with tension. The under water navigation vessel is assumed 1800DT submarine and its total mass at collision is obtained with hydrodynamic added mass. The buoyancy force on SFT is included in initial condition using dynamic relaxation method. The buoyancy ratio (B/W) and the collision speed are considered as the collision conditions. As results, energy dissipation is concentrated on the SFT and that of the UNV is minor. Additionally, the collision behaviors are greatly affected by B/W and the tension of mooring lines. Especially, the collision forces are shown different tendency compare to vessel collision force of current design code.

• Journal of Advanced Navigation Technology
• /
• v.19 no.5
• /
• pp.389-394
• /
• 2015

This paper considers the transfer alignment in the inertial navigation system which has lever-arm and the time delay in the velocity measurement. We suggest a method to improve the performance of the velocity matching. First, we analyze the estimation performance of the velocity matching through the tuning of the two covariance matrices of process noise and measurement noise. Next we provide some maneuvering conditions of the vehicles to improve the estimation performance using the observability analysis. The analysis results are verified using the computer simulations, which show that cruise movements do not provide the azimuth estimation of the vehicles, while east or north accelerating movement can provide.

• Journal of the Korean Institute of Navigation
• /
• v.16 no.2
• /
• pp.1-19
• /
• 1992

A Study for the relation between design parameters in conceptual stage and freight cost in operation of ocean-going bulk carrier was presented by economic criterial. Ship design procedure was followed to traditional method and programmed. The measure of merit is the Required Freight Rate(RFR). Parametric method used insteady of optimization technique due to easy to illustrate the results. Calculation results to the relation ship dimension, speed and operating cost in this paper show the influence of oil price is very important. Particularly, when oil price estimated as go up, owner choose a ship which lengh is long , breadth/draft is near 2.0 and speed is low. This program is useful for shipyard, consultant officer and owner all together.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.977-985
• /
• 2011

Airborne separation assurance is a key requirement for Free Flight Airspace operations, This paper study the feasibility of airborne separation assurance for free flight Airspaces operations by evaluating the efficiency measurement models. Three qualitatively different methods are utilized; one based Ground and Air conflict probability model, other based Dynamic Density model. the other based Direct operating cost model. The evaluation is Direct Operating Cost model and Two metrics are utilized for the efficiency measurements; airborne separation assurance performed quite well in the Free Flight evaluation; (1) 2 scenario of the conflict situations are resolved; (2) The MD-80 flight peformed separation assurance and efficiency, Not only appling for geometric method algorithm is more efficiently than potential method, but also the most efficiently geometric combined method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.276-284
• /
• 2013

This paper considers the transfer alignment in the inertial navigation system and the observability analysis is performed for velocity matching. The state variable of the Kalman filter is modeled including the lever arm error and the measurement equation is obtained. The SOM(Stripped Observability Matrix) method is used for the observability analysis for various maneuvering conditions of the vehicle, which gives the full state observability condition as a specific maneuver sequence of the vehicle. While the observability analysis of a lever arm effect in the existing papers is mainly performed by simulations, we performed it analytically by the observability analysis method. The analysis result is verified using the computer simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3B
• /
• pp.248-253
• /
• 2011

Collision avoidance algorithm of vessels have been studied to avoid collision and grounding of a vessel due to human error. In this paper, We propose a collision avoidance algorithm using bayesian estimation theory for safety sailing and reduced risk of collision accident. We calculate collision risk for efficient collision avoidance using bayesian algorithm and determined the safest and most effective collision risk is predicted by using re-planned with re-evaluated collision risk in the future(t=t'). Others ship position is assumed to be informed from AIS. Experimental results show that we estimate the safest and most effective collision risk.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.2
• /
• pp.1-8
• /
• 2019

Optimal path planning refers to find the safe route to the destination at a low cost, is a major problem with regard to autonomous navigation. Sampling Based Planning(SBP) approaches, such as Rapidly-exploring Random Tree Star($RRT^*$), are the most influential algorithm in path planning due to their relatively small calculations and scalability to high-dimensional problems. $RRT^*$-Smart introduced path optimization and biased sampling techniques into $RRT^*$ to increase convergent rate. This paper presents an improvement plan that has changed the biased sampling method to increase the initial convergent rate of the $RRT^*$-Smart, which is specified as m$RRT^*$-Smart. With comparison among $RRT^*$, $RRT^*$-Smart and m$RRT^*$-Smart in 2 & 3-D environments, m$RRT^*$-Smart showed similar or increased initial convergent rate than $RRT^*$ and $RRT^*$-Smart.