• Journal of Korea Water Resources Association
• /
• v.49 no.9
• /
• pp.761-771
• /
• 2016

The GloSea5 (Global Seasonal forecasting system version 5) is provided and operated by the KMA (Korea Meteorological Administration). GloSea5 provides Forecast (FCST) and Hindcast (HCST) data and its horizontal resolution is about 60km ($0.83^{\circ}{\times}0.56^{\circ}$) in the mid-latitudes. In order to use this data in watershed-scale water management, GloSea5 needs spatial-temporal downscaling. As such, statistical downscaling was used to correct for systematic biases of variables and to improve data reliability. HCST data is provided in ensemble format, and the highest statistical correlation ($R^2=0.60$, RMSE = 88.92, NSE = 0.57) of ensemble precipitation was reported for the Yongdam Dam watershed on the #6 grid. Additionally, the original GloSea5 (600.1 mm) showed the greatest difference (-26.5%) compared to observations (816.1 mm) during the summer flood season. However, downscaled GloSea5 was shown to have only a -3.1% error rate. Most of the underestimated results corresponded to precipitation levels during the flood season and the downscaled GloSea5 showed important results of restoration in precipitation levels. Per the analysis results of spatial autocorrelation using seasonal Moran's I, the spatial distribution was shown to be statistically significant. These results can improve the uncertainty of original GloSea5 and substantiate its spatial-temporal accuracy and validity. The spatial-temporal reproducibility assessment will play a very important role as basic data for watershed-scale water management.

• Journal of the Korean earth science society
• /
• v.24 no.4
• /
• pp.315-324
• /
• 2003

The characteristics of particles were evaluated through the measurement data of PM$_{2.5}$, PM$_{10}$ and TSP instruments located in air quality monitoring stations installed and operated by Seoul Metropolitan city. The data of particulate mass on the filter was collected bv a high volume air sampler during the sand storm period. The number of days of sand storm in Seoul showed a different pattern from 1990 to November 2002, We can see a trend of increased occurrence and duration of sand storms. The ratio of PM$_{10}$ to TSP was shown as 52.9% and 59.4% during the sand storm period in 2000 and 2001. respectively. It was indicated that the particles larger than 10${\mu}$m increased by approximately 10% in sand storm periods compared to no sand storm period. While PM$_{10}$ size fraction reached 71.4% in 2002, the contribution of sand storm to total particulate concentration was estimated to be 11.9% for PM$_{2.5}$, 23.1% for PM$_{10}$, 19% for TSP in 2002, respectively and sand storms highly correlated with annual total particulate concentration.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.5
• /
• pp.53-64
• /
• 2013

Resistivity monitoring is based on the fact that a change in the porosity leads to the changes in water content and fine particles, which alter the electrical resistivity. At every embankment dam, internal erosion always occurs as time passes. The internal erosion generally develops into piping over a long time by backward erosion and concentrated leak, and finally leads to dam failure. Resistivity is known to be very sensitive to the changes in porosity in embankment dams. Thus resistivity monitoring is a reasonable method to find out the leakage zone. However, resistivity is strongly influenced by seasonal variation of temperature, TDS of reservoir water and water level. In this paper. we first installed electrodes permanently at the center of the crest. The electrical resistivity monitoring data was acquired every 6 hours from Apr. 3, 2011 to July. 31, 2012. To analyze the characteristics of monitoring data, each resistivity data was calculated from up to 2,950 data sets. The result indicated a seasonal resistivity variation due to related temperature. Finally, a quantitative method to estimate porosities of the embankment dam from the resistivity monitoring data was analyzed. The applicability and reliability were verified and the importance of electrical resistivity monitoring for obtaining reliable result was emphasized.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.329-331
• /
• 2018

In this paper, we propose a monitoring system that starts with the supply of raw materials for threading, is processed into a lathe machine, and checks for defects of the product are automatically performed by the robot with Smart Factory technology through assembly and disassembly. Completion check according to the production instruction quantity and production instruction is made by checking the production status according to whether or not the raw material is worn by the displacement sensor, and checking the pitch and the contour of the processed female and male to determine OK and NG. The robotic system acts as a relay for loading and unloading of raw materials, pallet transfer, and overall process, and it acts as an intermediary for organically driving. The location information of the threaded products is collected by using the non-contact wireless tag and the energy saving system Production efficiency and utilization rate were checked. The environmental sensor collects the air-conditioning environment data (temperature, humidity), measures the temperature and humidity accurately, and checks the quality of product processing. It monitors and monitors the driving hazard level environment (overheating, humidity) of the product. Controls for CNC and robot module PLC as a heterogeneous system.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.4
• /
• pp.76-86
• /
• 2016

Recently, the Contracts of International Construction Business has been decreased from the beginning of 2015 in Korea, although it has been steadily increased until 2014. This trend could be caused by Low-Price Contracts, the lack of Know-how and experience in operating, the poor management of Claims and Low-Profitability in Business. It has been recognized that the qualitative improvement of Business Contacts are necessary for successful Projects. In the Bidding Process, therefore, Experience data as In-House Data and Lessons Learned for projects should be strategically involved to assure riskless offers. Accordingly the Proposal Process are needed to be organized and enhanced by including processes for risks review about technical, marketing and commercial part during the bidding. This paper proposes a Risk Management Process model during Bidding Phase, using Risk Evaluation Method through the project life-cycle. The Concept of Model is to define CSF (Critical Success Factor) in the bidding process and Risk Factors are linked to CSF and Organization based on RAM (Responsibility assignment matrix).

• Clean Technology
• /
• v.20 no.1
• /
• pp.13-21
• /
• 2014

Because of the water scarcity caused by the increase of salinity in the underground water, seawater desalination stands out as one of the most promising solution. As there are so much energy costs in operating desalination plants, new hybrid process which is more effective should be researched. A geothermal VMD (vacuum membrane distillation) hybrid process is a competitive alternative for seawater desalination. Because geothermal energy has significant characteristics of high capacity factor to operate the power plant at full capacity for 24 hour per day, it can be a priority heat source of VMD superior to any other renewable energies such as solar and wind power. In this study, we design a geothermal VMD hybrid process, analyze it economically and finally compare the result with a case of conventional VMD process. Geothermal VMD hybrid process generates $23,822,409 of NPV (net present value) more than the conventional VMD process in case of 5% discount rate. The break-even point between these processes is 5.36 year. Sensitivity analysis indicates that steam cost is the most decisive influence variable to the economic outcome.

• Journal of Digital Convergence
• /
• v.15 no.2
• /
• pp.47-58
• /
• 2017

Career and academic Counseling is often viewed as the catalyst for frequent and consistent interaction with students, but it is more than simply advising students about which majors, universities or jobs to consider. Ongoing, personal contact of career and academic counselors with students is an essential component in long-term career-related efficacy. But statistics show that high schools in non-urban or rural areas face significant issues different from those schools in metropolitan or suburban contexts, failing to maintain the significant number of teachers enough for effective career and academic counseling. This article proposes an alternative model of career and academic counseling, provided by MBA(Master of Business Administration) alumni based social enterprise in Seoul. This service explores the skills, knowledge and capabilities which MBA alumni gained from their jobs and MBA programs within the context of a career-competency framework. This paper concludes with the social and educational aspect of this shared responsibility strategy that may enhance student motivation and persistence in non-urban high schools.

• Journal of Industrial Convergence
• /
• v.18 no.5
• /
• pp.88-96
• /
• 2020

The rate of admission to facilities for people with developmental disabilities in Korea is very high for other types of disabilities. Therefore, 'community care', which supports life in the community for people with developmental disabilities, is very important compared to other types of disabilities. However, in Korea, families with disabilities are the problem of care and are appealing for the burden of support. This study analyzed practical cases through welfare institutional visits and interviews on support for community independence in Japan. As a result of the study, the transition of people with developmental disabilities to communities in Japan was centered on group home. The private sector is providing support for people with severe disabilities in group home to live in communities, and Sapporo City Hall is conducting private connections to solve the problem of caring for the developmentally disabled elderly parents. Accordingly, as Korean policy recommendations, it is proposed to expand group home, switch functions of living facilities for the disabled, cope with the problem of caring for the disabled by elderly parents, and provide preventive services through surveys on the actual condition of adults living alone. As practical suggestions, it is necessary to develop and distribute educational textbooks such as pictures to improve daily life skills for self-reliance, expand sufficient manpower and facilities in vocational training for self-reliance, and operate shelters for adults with developmental disabilities and their guardians.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.3
• /
• pp.64-129
• /
• 1992

최근 초지중심 사양형태의 증가와 초지면적의 확대에 따라 단순한 사료로서가 아니라 영양가치가 높고 기호성이 높은 목초생산이 요구되고 있다. 그러나, 고위생산을 위해 다량으로 사용된 질소질비료에 의하여 질산태 중독 등의 문제가 야기되고 있어 목초의 생리 및 영양에 관한 연구가 필요하게 되었다. 사료성분 혹은 영양가치에 대한 연구는 이미 일찍부터 다루어져 왔으나, 주로 야초류, 청예작물 및 농가부산물 등의 일반성분 특히, 조단백질과 조섬유함량의 연구가 주가 되었고 다년생 목초류에 대한 연구는 1975년경부터 본격화 되기 시작하였다. 그동안 한국초지학회지와 축산학회지($1972\sim1991$)에 게재된 총 151편의 생리 및 영양에 관한 연구 중에서 다년생 목초류를 취급한 것은 불과 63편에 머물고 있다. 이 분야의 연구는 각종 목초 사료작물에 대한 재배조건과 생육단계에 따른 생리생태학적 연구와 사료성분, 소화율 및 가소화양분 함량의 일반적인 변화, 경향을 검토하여 사료 가치 평가를 위한 기준으로 삼았다. 그러나 다년생 목초류는 물론 사료 작물에 있어서 육종 생리분야의 연구는 매우 미흡한 상태로써 단지 발아, 생육, 저장탄수화물 및 유독성분 등 단편적인 연구만이 행해지고 있을 뿐이다. 또한 사료 성분이 가축의 기호성에 미치는 영향을 구명하기 위한 연구는 거의 이루어지고 있지 않으므로 금후 탄수화물과 미량 요소에 대한 자세한 연구 검토가 필요하다고 생각된다. 특히 목초와 사료작물의 화학적인 조성과 가축의 생리에 관련한 여러가지 문제들도 앞으로 보다 깊이 연구되어야 할 과제라고 생각된다.권을 잡기 위해 10년지기였던 IBM과 MS사는 각각 OS/2와 윈도즈를 내세우고 양보할 수 없는 힘겨루기에 들어갔다. 또 이들 양사는 펜컴퓨터,멀티미디어등 차세대제품의 운영체제 시장을 둘러싸고 일찍부터 격전에 들어갔으며 IBM과 MS사의 혼전을 틈타 썬마이크로시스템을 필두로한 워크스테이션 업체 및 유닉스진영까지 고성능 PC시장을 겨냥한 OS를 속속 개발, 90년대의 OS 전쟁은 한치 앞을 내다볼 수 없는 안개국면으로 접어들고 있다. DOS에서 32비트시대,펜컴퓨터, 멀티미디어에 이르는 차세대제품을 둘러싼 업계의 OS 쟁탈전을 통해 OS의 발전동향과 미래를 전망해 본다. results in the large change of the objective function, the sum of squares of deviations of the observed and computed groundwater levels. 본 논문에서는 가파른 산사면에서 산사태의 발생을 예측하기 위한 수문학적 인 지하수 흐름 모델을 개발하였다. 이 모델은 물리적인 개념에 기본하였으며, Lumped-parameter를 이용하였다. 개발된 지하수 흐름 모델은 두 모델을 조합하여 구성되어 있으며, 비포화대 흐름을 위해서는 수정된 abcd 모델을, 포화대 흐름에 대해서는 시간 지체 효과를 고려할 수 있는 선형 저수지 모델을 이용하였다. 지하수 흐름 모델은 토층의 두께, 산사면의 경사각, 포화투수계수, 잠재 증발산 량과 같은 불확실한 상수들과 a, b, c, 그리고 K와 같은 자유모델변수들을 가진다. 자유모델변수들은 유입-유출 자료들로부터 평가할 수

• Archives of design research
• /
• v.15 no.3
• /
• pp.5-14
• /
• 2002

The amusement design of a large amusement park, including theme park, largely consists of attraction design, the main facilities, and auxiliary facilities design. The purpose of this study was to discuss the physical motion characteristics of major ride, a recently highlighted representative ride attraction, modern people's thirst for stronger stimuli, and some of the right future directions for amusement design. In theme park, there is an growing trend for rides, especially major rides, to be more thrilling, and Newton's Law motion is basically applied. The rides we can often see provides a thrilling experience that is different from that offered by vehicles we use everyday, due to a variety of speed change, namely of acceleration. Every entertainment facilities, including ride attractions, are externally cutting edge with the use of new technology. but internally, poor theme or concept not only makes it difficult to function properly as attraction but poses a severe threat to theme park survival itself. Theme park will be able to exist as a comprehensive entertainment entity, when attractions are designed to have a perfect harmony among story, method and environment with cultural universality.