• Journal of Aerospace System Engineering
• /
• v.11 no.4
• /
• pp.22-29
• /
• 2017

A study is performed for the effective detection method of a fault which is occurred during operation in a small turbojet engine with non-linear characteristics used by unmanned air vehicle. For this study the non-linear dynamic model of the engine is derived from transient thermodynamic cycle analysis. Also for inducing real operation conditions the controller is developed associated with unscented Kalman filter to estimate noises. Sequential probability ratio test is introduced as a real time method to detect a fault which is manipulated for simulation as a malfunction of rotational speed sensor contaminated by large amount of noise. The method applied to the fault detection during operation verifies its effectiveness and high feasibility by showing good and definite decision performances of the fault.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.2
• /
• pp.149-155
• /
• 2015

MEMS-based louver and shutter type conventional variable emissivity radiators change their emissivity properties in accordance with a temperature condition to achieve efficient thermal control performance. However, there are some drawbacks such as a structural safety of the mechanical moving parts under sever launch environment and constant power consumption to maintain the intended emissivity. In this study, to overcome above drawbacks, we proposed a MEMS-based variable emissivity radiator, which can change the emissivity property according to the polarity change of electrodes by using electric charge of the bead. The effectiveness of the optimized radiator design has been demonstrated through the comparison of efficiency with the fixed emissivity radiator.

• Journal of Aerospace System Engineering
• /
• v.11 no.5
• /
• pp.42-49
• /
• 2017

The solid rocket motor(SRM) consists of a motor case, igniter, propellants, nozzle, insulation, controller, and driving device. The liquid rocket propulsion systems(LRPSs) cools the nozzle by the fuel and oxidizer but SRM does not cool the nozzle. The nozzle of SRM is high temperature condition and high velocity condition so occurs the erosion by combustion gas. This erosion occurs the change of nozzle throat and reduces thrust performance of rocket. The material of Rocket nozzle is minimization of erosion and insulation effect and endure the shear force, high temperature and high pressure. The purpose of this study is to investigate the erosion characteristics of solid rocket nozzles by each combustion time. Through the structure inspection of Graphite and C-C composite, identify the characteristics of the microstructure before and after erosion.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.164.2-164.2
• /
• 2012

인공위성레이저추적(SLR, Satellite Laser Ranging) 시스템은 인공위성까지 레이저를 발사하여 되돌아오는 시간간격을 측정함으로서 위성까지의 거리를 측정하는 시스템으로 현존하는 인공위성 궤도결정 시스템으로는 가장 정밀하다. 한국천문연구원은 우주추적 및 감시의 필요성이 증가함에 따라 2008년부터 40cm급 이동형 인공위성레이저추적 시스템을 개발을 시작하였고, 현재 개발을 완료하여 시험운영 중에 있다. 시스템 개발 과정 중에 발생할 수 있는 문제점들을 최소화하기 위해, 설계 단계에서 부품을 포함한 광기계 구조물에 대한 구조해석과, 실험실 프로토타입 구성 등을 실시하였다. 제작된 각 서브시스템별 조립 및 평가는 한국천문연구원이 보유한 광학계 조립 및 평가 시설을 이용하였다. 개발된 이동형 레이저 추적 시스템의 광학부는 추적마운트에 장착되었고, 현장 시험관측을 통해 수신광학계 및 광신호유도계의 정렬 및 제어항목 교정 등을 실시하였으며, 성공적으로 시험 영상 관측을 완료하였다. 이 발표에서는 이동형 레이저 추적 시스템 광학계의 개발 과정과 그 결과에 대해 보고한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.2
• /
• pp.147-154
• /
• 2021

In this paper, the configuration and design of the test equipment are presented to examine the impact of rapid temperature change in cooling-air that may occur during the operation of the fixed wing aircraft Environmental Control System (ECS) on avionic electronic equipment. At the start of the ECS, the temperature of the air supplied by the aircraft ECS may be increased to 5.0℃ per second. In order to ensure operating of the avionic electronic equipment that is mounted on the aircraft and receives cooling-air from the ECS, testing equipment that can implement the cooling-air characteristic test environment is required. During design of test equipment was verified cooling-air rapid rate of temperature change by performing a thermal/flow analysis, performance of the test equipment implemented was verified by applying an avionic electronic equipment.

• Journal of Welding and Joining
• /
• v.12 no.1
• /
• pp.7-15
• /
• 1994

알루미늄합금의 용도가 우주 항공기 부품에서 자동차, 선박, 건축 등 다양화되면서 이들 재료에 대한 용접기술 또한 산업현장의 주요한 과제로 등장하게 되었다. 알루미늄합금은 극히 활성이 높고, 열전도율이나 열팽창계수가 매우 큰 물리적 특성 및 액상과 고상간의 매우 큰 수소 용해도 차이 등의 특이한 성질을 가지고 있기 때문에 용접에 있어서는 기공이나 미세한 융합 불량이 발생하기 쉽고, 또 용접변형의 제어에도 세심한 배려를 요하는 등 우수한 용접부를 만들기 위해서 고려해야 할 문제를 가지고 있다. 특히 기공이 후판 알루미늄 합금 용접에 있어서 보수공사의 대부분을 차지하고 있으므로 기공 방지법을 확립하는 것은 매우 중요하다. 알루미늄 합금의 용접에 있어서 기공의 발생원인은 수소에 의한 것이라고 정립되어 있으나 그 방지법에 대해서는 많은 연구검토가 행해지고 있음에도 불구하고 수소의 공급경로가 매우 다양하고 복잡하기 때문에 아직 체계적으로 확립되어 있지 못한 실정이다. 본 해설에서는 후판 알루미늄 용접시 가장 큰 문제가 되는 기공의 발생 원인과 방지대책을 기 발표된 자료를 기초로 하여 요약 정리함으로써 앞으로 여러 생산현장에서의 알루미늄합금 용접 특히 MIG 용접 관련 문제점 해결에 도움이 되고자 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.10
• /
• pp.875-887
• /
• 2015

The optimal layout design is used in the development of various areas of industry. In the field of space systems, components must be placed properly in the limited space of spacecraft by considering mechanical, thermal and electrical interfaces. When applying optimal layout design, a proper, even ideal placement of components is possible in the limited space of a satellite platform. Through the optimal placement design, the minimized moment of inertia enhances efficient attitude control, rapid maneuver and mission performance of the satellite. This paper proposes 3D optimal layout design that minimizes the spacecraft's moment of inertia and effect of thermal dissipation between inner components as well as interference between inner components based on a cubic-structure satellite platform. This study proposes the new genetic algorithm for 3D optimal layout design of the satellite platform.

• Journal of Aerospace System Engineering
• /
• v.12 no.5
• /
• pp.8-15
• /
• 2018

The geostationary satellite uses a liquid apogee engine, to obtain a required velocity increment to enter a geostationary orbit. However, as the liquid apogee engine operates in the vacuum, a considerable disbursement of exhaust plume flow, from the liquid apogee engine can trigger a backflow. As this backflow may possibly collide with the satellite directly, it can cause adverse effects such as surface contamination, thermal load, and altitude disturbance, that can generate performance reduction of the geostationary satellite. So, this study investigated exhaust plume behavior of 400 N grade liquid apogee engine numerically. To analyze exhaust plume behavior in vacuum condition, the DSMC (Direct Simulation Monte Carlo) method based on Boltzmann equation is used. As a result, thermal fluid characteristics of exhaust plume such as temperature and number density, are observed.

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.57-65
• /
• 2002

The Electrical Power System (EPS) shall supply required power to maintain spacecraft and payload during the mission. The EPS sizing are based on space environment, satellite mission and lifetime, and allocated budgets. The type of the primary and secondary power is determined according to satellite design-level and allocated subsystem budgets. The design of EPS has closely related to system and others' subsystems design. To supply the sufficient power to the satellite, the implementation of the larger power source and energy storage is impossible actually. And there will be some problems of the attitude control of the satellite, the handling power capability of the electronic boxes, and launch vehicle selection caused by EPS oversizing. Also, the thermal control is not easy in the space by extra power. And the maintenance of the satellite within the specific orbit from orbit-drag is a big design burden of the thruster. So the various technologies have been developed to optimize the EPS sizing and to operate the power system efficiently.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.44-52
• /
• 2003

Shape memory alloys (SMA) are often used in smart structures as active components. Their ability to provide large recovery forces and displacements has been useful in many applications, including devices for artificial muscles, active structural acoustic control, and shape control. Based on the 3-dimensional SMA constitutive equation in this paper, the radial displacement control of externally pressurized circular and semicircular composite cylinders under external pressure with a thin SMA layer bonded on its inner surface or inserted between composite layers in investigated using 3-dimensional finite element analysis. Upon actuation through resistive heating, SMAs start to transform from martensitic into austenitic state, simultaneously recover the prestrain, and thus cause the composite cylinders to go back to their original shapes of the cylinder cross-sections.