• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2013

A liquid-monopropellant hydrazine thruster has several outstanding advantages such as relatively-simple structure, long/stable propellant storability, clean exhaust products, and so on. Therefore hydrazine thruster has such a wide application as orbit and attitude control system (ACS) for space vehicles. A hydrazine thruster with the medium-level thrust to be used in the ACS of space launch vehicles (SLV) has been developed, and its ground firing test result is presented in terms of thrust, impulse bit, temperature, and chamber pressure. It is verified through the performance test that the response and repeatability of thrust are very excellent, and the thrust efficiencies compared to its ideal requirement are larger than 93%.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.89-97
• /
• 2021

STEP Cube Lab-II (Cube Laboratory for Space Technology Experimental Project-II) is a 6U Cube satellite equipped with optical and infrared cameras for monitoring Mt. Paektu volcanic eruption signs and earth observation in the Korean peninsula. To guarantee successful mission operation of the cube satellite in orbit, thermal design is essential for the electronic equipment, and must be kept within the allowable temperature range during the mission period. Thus, it is necessary to analyze the predictable orbital thermal environment. The STEP Cube Lab-II is launched through the KSLV-II, however, the operation orbit has not been determined due to the unknown launch time. In this study, we performed a thermal analysis of the satellite and investigated the heat flux according to launch time to analyze the worst orbital conditions that could occur.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.368-369
• /
• 2010

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.64-71
• /
• 2011

In this study, steady and unsteady aerodynamic analyses of a huge rocket configuration have been conducted in a transonic flow region. The launch vehicle structural response are coupled with the transonic flow state transitions at the nose of the payload fairing. The developed fluid-structure coupled analysis system is applied for aeroelastic computations combining computational structural dynamics(CSD), finite element method(FEM) and computational fluid dynamics(CFD) in the time domain. It can give very accurate and useful engineering data on the structural dynamic design of advanced flight vehicles. For the nonlinear unsteady aerodynamics in high transonic flow region, Navier-Stokes equations using the structured grid system have been applied to the rocket configurations. Also, it is typically shown that the current computation approach can yield realistic and practical results for rocket design and test engineers.

• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.155-169
• /
• 2004

Space launch vehicles and reentry vehicles are exposed to extreme heating conditions due to high aerodynamic heating while flying at high Mach numbers in the atmosphere. To protect the vehicle itself or the payload from the aerodynamic heating, the thermal load imposed on the surface should be exactly predicted and proper thermal protection should be applied based on the prediction results. But this requires rigorous thermal analysis and testing to prevent loss of payload capacity caused by excessive heat shielding, and the amount of thermal protection material to be applied is determined through aerodynamic heating tests. Various design points to be considered to upgrade the prototype aerodynamic thermal simulation facility(ATSF) used for the KSR-series sounding rocket development to the one suitable for the KSLV(Korean Space Launch Vehicle)-series launch vehicle are considered in this research. The need and limitation for the facility are first considered, and the functions required for KSLV testing are determined. The specifications of the upgraded facility are briefly suggested and these results will be used for the future fabrication and installation of the facility.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.245-254
• /
• 2007

The on-board telemetry system of KSLV-1 transmits telemetry signal for the launch vehicle and satellite to ground telemetry system in real time. In ground telemetry system, antenna system acquires telemetry signals and transfers these to data processing system. Data processing system processes and recordes telemetry data and distributes it to each mission operator in order to monitor it the operation goes well or not. This document describes the configurations and functions of data processing system designed for efficient and appropriate processing of telemetry data.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.107-121
• /
• 2020

The performance analysis of the small satellites launch vehicle using the electric pump cycle as the upper stage engines was performed. The first stage is the launch vehicle that uses the test launch vehicle of the Korea Space Launch Vehicle II and the second stage employs elecpump cycle engine that uses liquid methane and kerosene (RP-1) as fuel. A model for the mass estimation was presented and the analysis was conducted for the range of thrust of 20 to 40 kN and combustion pressure of 3 to 6 MPa with a nozzle expansion ratio of 60 to 100. The mixture ratio with the maximum velocity increment was calculated and the performance of the LEO and SSO payload were calculated from the stage mass estimation. In both the cases, liquid methane, and RP-1 showed maximum payload for 20 kN thrust, 3 MPa combustion pressure, and the nozzle expansion ratio of 100, with a mixture ratio of 3.49 for liquid methane and 2.75 for RP-1. In addition, the ditching points of the first stage and the fairing in the LEO mission were analyzed using ASTOS.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.9
• /
• pp.55-63
• /
• 2003

An attitude control system using reaction thrusters for the upper stage of a launch vehicle is considered. The thruster configuration (position and direction) determines control system response, fuel consumption, effective torque and system fault tolerance. We propose a procedure for finding the optimal thruster configuration with desired control effectiveness over the range of selected torque commands. An optimization technique called Particle Swarm Optimization is used for the numerical experiments. The validity of the solution is checked through computer simulations.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.125-128
• /
• 2010

A pyrotechnic igniter with a relatively simple configuration was developed to secure the stable and reliable ignition of the gas generator in space launch vehicles. It was designed not only to provide a sufficient heat flux for the propellant ignition but also to ensure a structural safety under the conditions of very high temperatures and pressures. The burning tests of the igniters have been performed to decide several design parameters, and consequently the performance tests have proved that the pyrotechnic igniter developed in this study meets the design requirements.

• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.134-142
• /
• 2004

This is a survey report of Japan's geo-stationary satellite development. Owing to Japanese government's ambitious space development efforts since 1950's, Japan became the fourth country that launched successfully its own satellite by using its own launch vehicle with the launch of Japan's first satellite, Ohsumi, in 1970. Since then Japan is maintaining a world leader's position in space development with continuous technology accumulation. Japan is injected 97 satellites into orbit(third in the world) by the end of 2003 including 18 science satellite series, 7 technology experiment satellite series, 5 meteorological satellites, and numerous telecommunication and broadcasting satellites, etc. With successful delivery of Optus C1 satellite to Sing Tel Optus Pty., Ltd. in Australia in June 2003 by MELCO, Japan is capable of competing in the international geo-stationary satellite market.