• Title/Summary/Keyword: 용량보정계수

Search Result 44, Processing Time 0.041 seconds

Estimation of Tunnel Factor from Capacity Reduction of Successive Tunnels (연속되는 터널의 도로교통용량 감소특성에 의한 터널보정계수 산정에 관한 연구)

  • 조현우;장명순
    • Journal of Korean Society of Transportation
    • /
    • v.16 no.3
    • /
    • pp.7-14
    • /
    • 1998
  • 터널의 경우 도로교통용량이 일반구간에 비해 감소하는 것으로 나타나고 있다. 그러나 연속되는 터널의 경우에 있어 도로교통용량감소에 대한 연구는 아직 이루어지지 않고 있다. 본 연구에서는 고속도로의 2지점에서 연속되는 터널의 도로교통용량의 감소특성을 이용한 터널보정계수를 산정하여 다음과 같은 결과를 도출하였다. (1) 터널을 통과하는 경우의 도로교통용량은 통과전보다 감소하는 것을 알 수 있으며, 연속되는 터널을 통과하는 경우 감소량은 이보다 큰 것으로 나타났다. (2) 터널보정계수$(f_{tu})$를 도출한 결과 하나의 터널을 통과하는 경우의 터널보정계수$(f_{tu1})$는 0.95, 연속되는 터널을 통과하는 경우의 터널보정 계수$(f_{tu2})$는 0.90으로 산정되었다.

  • PDF

Adjustment Factor for Heavy Vehicles in Estimating Capacity at Unsignalized Intersections (비신호 교차로의 중차량 용량 보정계수에 관한 연구)

  • 이용재;김석근
    • Journal of Korean Society of Transportation
    • /
    • v.19 no.2
    • /
    • pp.89-98
    • /
    • 2001
  • The objective of this Paper is to derive an adjustment factor for the presence of heavy vehicles when estimating capacity at unsignalized intersections (and/or at modern roundabouts). According to the 1997 and 2000 Highway Capacity Manual (HCM), potential capacity in such cases is estimated by simply adjusting base critical gap and base follow-up time. However, the procedure suggested in the HCM may lead to some errors in the adjustment, hence resulting in poor evaluation and design for the intersections, because it determines the value of adjusting factors by only the number of lanes on main streets regardless of the types of heavy vehicles. This paper shows a simple formula for making the adjustment. This formula is much like the HCM formula used for heavy vehicles in estimating highway capacity by the adoption of passenger car units (PCU). In contrast to the traditional approaches seen in the HCM, the PCU value of this case is explicitly expressed by the flow rate in the major streams and the gap difference in critical gaps chosen by passenger cars and particular heavy vehicles. Computational results of the adjustment factor are graphically illustrated.

  • PDF

Cost Scaling Factor according to Power Plant Capacity Change (발전소 용량변경에 따른 비용보정계수)

  • Ha, Gak-Hyeon;Kim, Sung-Hwan
    • Journal of Energy Engineering
    • /
    • v.22 no.3
    • /
    • pp.283-286
    • /
    • 2013
  • The existing nuclear power plants have been often redesigned by increasing or decreasing electrical power without changing design concept by the request of utility, economic factors or other factors. When the cost of power plant equipment redesigned by changing reactor power and electrical power is estimated, if its quotation is not available in the market place, cost scaling factor(CSF) applies to the cost of existing plant equipment and then the new-designed equipment cost can be calculated. In this paper, we review CSFs according to plant capacity change cases in United State DOE, EPRI, ABB, SWEC and introduce the results applied to Korean PWR 1000MWe and 1400MWe.

Development of Adjustment Factors for The Shared Left-turn Lane with U-Turn at the Signalized Intersection (신호교차로에서 좌회전.유턴 공용차로 보정계수 산정)

  • 안형기;오영태
    • Journal of Korean Society of Transportation
    • /
    • v.18 no.5
    • /
    • pp.43-56
    • /
    • 2000
  • 본 연구의 목적은 우리 나라의 주요 간선도로상에서 운영되고 있는 좌회전 ·유턴 공용차로에 대한 적절한 보정계수를 산정하는 것이다. 이에 본 연구에서는 좌회전 2차로(1차로 유턴공용) 3개 지점 및 좌회전 ·유턴 공용 1타로 3개 지점에 대해서 연구를 수행하였으며, 유턴 전용차로 2개 지점에 대해서도 연구를 수행하였다. 좌회전 유턴 공용차로에서의 유턴 비율에 따른 포화교통류율의 변화를 분석하였으며, 회귀모형을 도출하였다. 본 연구의 연구 결과는 다음과 같다. 첫째, 중앙분리대로 분리된 유턴 전용차로를 대상으로 분석한 유턴 포화교통류율은 2,105(pcphgpl)로 산정되었다. 둘째, 좌회전 2차로(1차로 유턴공용)에 대하여 3개지점을 대상으로 유턴 비율에 따른 포화교통류율의 살펴보고 적절한 보정계수를 산정하였으며 각 차로별 좌회전 포화교통류율은 1차로는 2,105(Pcphgpl), 2차로는 2,023(Pcphgpl)이 산정되었다. 또한 유턴 비율과 포화교통류율에 따른 회귀모형을 산정하였다. 셋째, 좌회전 ·유턴 용 1차로에 대하여 3개지점을 대상으로 유턴 비율에 따른 포화교통류율의 변화를 살펴보고, 적절한 보정계수를 산정하였으며, 좌회전 포화교통류율은 2,143(Pcphgpl)으로 산정되었다. 또한 유턴 비율과 포화교통류율에 따른 회귀모형을 산정하였다. 넷째, 회귀모형의 산정결과 좌회전 ·유턴 공용차로에서는 유턴 비율에 따라서 포화교통류율이 감소하는 것으로 나타났다. 본 연구의 기대효과로는 유턴 비율에 따른 좌회전 유턴 공용차로의 포화교통류율 감소에 대하여 용량분석시 적용할 수 있는 보정계수를 제시함으로서 보다 정확한 신호교차로의 운영분석을 할 수 있다고 판단된다. 또한 신호시간 설계시에도 유턴 수요에 따른 적절한 설계에 도움을 줄 수 있으며 따라서 신호교차로의 운영효율을 증대시키는데 기여할 것으로 판단된다.

  • PDF

Capacity and Saturation Flow Rate of Permissive Left-Turn Lane: in case for the Exclusive Use of Permissive Left-Turn Movements (비보호(非保護) 좌회전(左回轉)의 간격수락(間隔受諾)과 용량(容量) 및 보정계수(補整係數)에 관한 연구)

  • Do, Cheol Ung
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.14 no.6
    • /
    • pp.1273-1279
    • /
    • 1994
  • There are 3 cases that only permissive left-turn(PLT) vehicles use the possible lane for PLT. In these cases, left turn and through movements can not be included in the same lane group, hence saturation flow rate and left turn adjustment factor of PLT are obtained separately from through movement. In capacity analysis procedures at signalized intersection with PLT phasing, PLT capacity should be known to discriminate among 3 cases stated above. The capacity is directly used not only to get saturation flow rate and left turn adjustment factor, but as a threshold for the feasibility of PLT control. This study calculated through field data the critical gap and minimum headway of left turn which affect the PLT capacity. The capacity was obtained by using theoretical models, which consequently could be used to calculate the saturation flow rate and left turn adjustment factor.

  • PDF

A study on the restoration of transient voltage deformed by the measuring system (과도고전압 측정에서 측정값 보정에 관한 연구)

  • 이복희;이국중;전덕규;백승권;임동묵
    • Electrical & Electronic Materials
    • /
    • v.6 no.3
    • /
    • pp.255-260
    • /
    • 1993
  • 본 논문은 과도고전압 측정시스템의 단위계단응답으로부터 구한 보정계수를 사용하여 수치계산에 의해 출력값을 보정하는 방법에 대하여 기술하였다. 또한 실규모 용량성분압기의 분압비와 상승시간을 갖는 모의등가회로를 구성하여 측정한 바, 본 연구에서 제안된 보정방법은 급준파 및 차단파 등의 어떠한 입력에도 유용하게 사용할 수 있다.

  • PDF

A Study on the Capacity Analysis of 8-lane basic section Freeway (8차로 고속도로 기본구간 용량분석에 관한 연구)

  • 김상구;서영선
    • Journal of Korean Society of Transportation
    • /
    • v.17 no.3
    • /
    • pp.87-96
    • /
    • 1999
  • It is very important to analyze the capacity of basic freeway section in terms of planning, design, and operation of roads. Capacity, in Korean Highway Capacity Manual was Published in 1992, had been determined by data collected in only 4-lane freeway. But, Korea is continuously planning and constructing multi-lane roads for increasing traffic demand. For this reason, it is necessary to determine the capacity for multi-lane freeways. This study goals are two-fold the determination of lane capacity for 8-lane freeway; and the development of methodology determining total capacity using lane friction factor This study utilized the data collected by loop detectors at a station of FTMS in Kyungbu expressway. For determining capacities, this study analyzed maximum flow rate in various aspects such as collecting period, each lane, and total lane in one-way. In addition, this study evaluated the breakdown in traffic flow relations in order to find out interrelation of breakdown among lanes. Through this analysis, this study determined lane friction factors, critical speed, and critical density. Finally, this study expressed a new methodology of capacity analysis for multi-lane freeways using some findings from this analysis.

  • PDF

Analyses of Capacity and Lest-Turn Adjustment Factors for Permitted Left-Turn (비보호좌회전 보정계수 및 용량 분석)

  • 김경환;강남기
    • Journal of Korean Society of Transportation
    • /
    • v.16 no.1
    • /
    • pp.129-150
    • /
    • 1998
  • 신호교차로에서의 효율적인 교통운영을 위해서는 비보호좌회전의 활성화가 필요하며 이를 위해서는 비보호좌회전이 허용되는 신호교차로에서의 교통운영의 정확한 분석이 가능해야한다. 본연구에서는 국내신호교차로에서의 운전자의 행태에 기초하여 USHCM의 비보호 좌회전 분석에서 요구되는 $g_f$, $g_q$, $P_L$, 의 현실적인 값을 산정하기 위한 모형이 제안되었으며 이에 기초하여 비보호좌회전 보정계수 및 용량분석 기법을 제시하였다. 본 연구의 결과는 다음과 같다. 첫째, 공용차로를 가진 비보호좌회전 신호교차로에서 주기당 좌회전교통량(LTC)이 5대까지의 범위에서 G(녹색신호시간)와 LTC를 변수로 한 $g_f$모형이 개발되었다. 둘째, $v_{olc}$$qr_o$를 변수로 한 $g_q$모형이 개발되었으며 제안된 모형에 의한 $g_q$값이 진주 및 광주에서의 현장관측치와 거의 일치함을 볼 수 있었다. 셋째, 1994 USHCM의 $P_L$모형이 LTC가 증가할수록 $P_L$값이 감소하는 비현실적인 모형의 구조를 가지므로 현실적인 모형의 구축을 위해 국내 현장자료에 기초하여 LTC를 변수로하여 $P_L$산정을 위한 단순화된 모형이 개발되었다. 넷째, 대향교통류를 통해 좌회전할 수 있는 유효녹색시간의 부분의 $g_u$를 산정하여 비보호좌회전 포화교통류율($S_{LT}$)에 주기 대 $g_u$의 비를 곱한 비보호좌회전 용량산정식이 제안되었다.

  • PDF

A Study on the Continuous Permissible Current Rating Calculation Methodology of Transmission Cable in Underground pipe Using a DTS Data (DTS 계측자료를 이용한 지중관로에서의 송전 케이블 허용전류 산정 방법론에 관한 연구)

  • Kim, Seong-Eun;Youn, Seok-Min;Jung, Woo-Jin;Lee, Hong-Kwan;Kim, Jung-Hoon;Kim, Sang-Tea;Son, Chun-Myoung
    • Proceedings of the KIEE Conference
    • /
    • 2015.07a
    • /
    • pp.422-423
    • /
    • 2015
  • 현재 허용전류는 가장 열악한 조건과 여유분을 주어 계산하기 때문에 지중 송전 케이블의 실제 송전용량은 설계보다 상당히 큰 용량을 사용할 수 있다. 송전용량을 증대시키는 방법 중 하나로 DRS(Dynamic Rating System)를 도입하는 방법이 떠오르고 있다. DRS는 이미 상용화 되어있으나 지중관로의 경우 기존에 포설되어 있는 케이블에 DTS를 설치하기가 곤란하여 관로조건에서는 동적 허용전류를 산정하기에 어려움이 있다. 따라서 본 논문에서는 DTS 계측자료를 이용하여 보정계수법을 통한 허용전류 산정 방법론을 제안한다. 또한 지중관로의 맨홀부에서 측정한 케이블의 표면 온도를 이용하여 관로 내 케이블의 분포 표면 온도를 추정하고 보정계수를 통한 허용전류를 산정하는 방법론을 제안한다.

  • PDF

Calculation of Passenger Car Equivalents on National Highway using Time Headway (차두시간을 이용한 일반국도의 승용차 환산계수 산정)

  • Kim, Tae-woon;Oh, Ju-sam
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.14 no.4
    • /
    • pp.52-61
    • /
    • 2015
  • PCE(Passenger Car Equivalents) is used to analysis of road capacity and LOS(Level of Service). In this study calculates PCE by number of lane and 12 vehicle type by MOLIT(Minister of Land, Infra Structure and Transport) using individual vehicle data. The results of the calculation, PCEs are increased when high vehicle classification level, many number of lanes and weekend. Heavy vehicle factors are smaller than KHCM on 4, 6 lane. Also, In this study estimates of PCE variation model by heavy vehicle percentage. Impact of Heavy vehicles on PCEs is the most sensitive on 2 lane. The results of the study, heavy vehicles low impact on PCE on multi-lane and business trips are a little in weekend.