• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.163-173
• /
• 2014

In this study, a modeling method is based on representing a road generation system with several rigid bodies, i.e, pad, shaft, torsional damper, oneway-clutch, gear system, and electricity generator. The simulation software is developed to evaluate the performance of a road generation system. It is used to determine parametric dimension for optimal design with the theoretically calculated results from the simulation software. The parametric dimensions are included as capacity, length, and angle of equipment. The transient responses at the conditions of low and high vehicle speed are compared with the calculated results as torque, power, out energy etc. Consequently, before manufacturing system, the analysis of simulation results shows that the proposed concept and system has efficiency and confidence.

• Korean journal of applied entomology
• /
• v.48 no.1
• /
• pp.101-108
• /
• 2009

For biological control of larva of Cnaphalocrocis medinalis and Naranga aenescens do considerable damage to crops by folding and scraping the leaf tissue of rice, a large number of Bacillus thuringiensis isolates have been obtained from soil samples in Korea and the pesticidal activity was assayed against two insect pest species described above. Among 53 Bt isolates tested in bioassay, 18 and 13 isolates showed over 90% mortality against C. medinalis and N. aenescens, respectively. Some isolates (11 isolates including CAB141) presented dual activity against C. medinalis and N. aenescens. These isolates showed over 96% control effect in pest control in laboratory against larvae of C. medinalis. Also, it was investigated that pupation, pupal length, and adult emergence of larvae exposed to Bt suspension decreased. Especially, the pupal length of C. medinalis after being fed corn seedling leaves treated Bt suspension for 10 days, were much smaller than that of control.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11A
• /
• pp.891-901
• /
• 2003

This paper presents low-power asynchronous barrel shifters for variable length encoders and decoders useful in portable applications using multimedia standards. Our approach is to create multi-level asynchronous barrel shifters optimized for the skewed shift control statistics often found in these codecs. For common shifts, data passes through one level, whereas for rare shifts, data passes though multiple levels. We compare our optimized designs with the straightforward asynchronous and synchronous designs. Both pre- and Post-layout HSPICE simulation results indicate that, compared to their synchronous counterparts, our designs provide over a 40% savings in average energy consumption for a given average performance.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.227.2-227.2
• /
• 2010

본 연구에서는 양극산화된 $TiO_2$ 전극(anodized tubular $TiO_2$ electrode, ATTE)을 수소제조용 PEC(Photoelectrochemical)시스템에서 광어노드와 기존의 백금전극을 대체하고 $H^+$ 환원능을 향상시키기 위하여 엔자임(Pyrococcus furiosus, Pfu)을 고정화한 후 캐소드로 동시에 활용하였으며, 엔자임 고정을 위한 crosslinker 종류 및 금속담지 여부, ATTE 길이를 통한 수소발생양에 미치는 영향을 연구하였다. ATTE 표면과 엔자임의 amine group의 연결을 위하여 heterobifunctional crosslinker로써 사슬 길이가 상대적으로 짧은 Sulfo-SDA가 유리하였으며, 금속담지의 경우 짧은 튜브의 경우 1% 내에서 효과가 증진되었으나 긴 튜브의 경우는 오히려 광전류 및 궁극적으로 수소발생속도에 불리하게 작용하였다. 또한, 튜브 길이가 긴 ATTE가 짧은 ATTE 보다 수소발생양에서 더욱 효율적임을 알 수 있었다. 텅스텐산화물 담지의 가시광감응에의 담지 효과는 예비 실험 결과로 나타나지 않아, 추가적인 연구가 필요한 것으로 판단된다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.11
• /
• pp.57-62
• /
• 2011

In this paper, an efficient architecture for MFVLD(Multi-Format Variable Length Decoder) which can process H.264, MPEG-2, MPEG-4, AVS, VC-1 bitstream is proposed. The proposed MF-VLD is designed to be adapted to the MPSOC (Multi-processor System on Chip) architecture, uses bit-plane algorithm for the processing of inverse quantized data to reduce the width of AHB bus. External SDRAM is used to minimize the internal memory size. In this architecture, the adding or removing each variable length decoder can be easily done by using multiplexor. The designed MF-VLD can be operated in 200MHz at 0.18um process. The gate size is 657K gate and internal memory size is 27Kbyte.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.1
• /
• pp.1-5
• /
• 2009

In this paper, a novel wideband crossed planar monopole antenna with the multiple resonance characteristics is proposed. The proposed monopole antenna can be designed by a wideband crossed planar monopole antenna with L-shaped slits. In order to generate multiple resonance characteristics on the proposed monopole antenna, the length of L-shaped slit and the number of L-shaped slits are determined at an interesting frequency. The proposed antenna having an omnidirectional radiation pattern and a high gain over the multiple resonance frequency bands, respectively, is suitable for a mobile antenna.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2357-2363
• /
• 1997

In this paepr, we show that the length of the test sequence can be reduced using non-minimal multiple UIO instead of minimal multiple UIO. Our test sequence generation method starts from the observation that Shen's approach cannot optimize the length of the test sequence whtn the difference between the number of incoming edge and that of outgoing edge is large. Usig the property, we propse a more efficient method to generate a UIO-based test sequence in terms of the length, and compares our method with other existing methods in terms of execution time for comformancetesting and time for generation of test sequence.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.343-347
• /
• 2011

하천 내 설치하는 수제는 제방보호 및 유로변경의 목적으로 하천내 시공되는 구조물 중의 하나로서 하천복원과정에 있어 필수불가결한 구조물 중의 하나로 인식되고 있다. 수제는 대개 하나 이상의 일련의 군집형태로 수로 자체의 특성을 고려하여 설치가 되고 있다. 그러나 이러한 수제의 무분별한 설치는 주변 경관을 저해하는 요소로 나타날 수 있을 뿐만 아니라 시공에 따른 비용에 적지 않은 부담을 야기 시키기 충분하다.본 실험에서는 하향수제($\theta=135^{\circ}$)를 대상으로 수제간격에 대한 이동상 실험을 수행하여 수제주변 및 수제역 내에서 발생하는 하상변동특성을 검토하고자 하였다. 실험은 폭 1.2m, 길이 50m, 높이 1.5m 인 직선수로에서 수로폭의 15%길이를 갖는 하향수제($\theta=135^{\circ}$) 2개를 대상으로 각각 수제길이의 2~ 8배의 간격 조절을 통해 하상변동실험을 수행 하였다. 실험용입자는 중간입경($d_{50}$)이 0.15mm 인 모래를 사용하였으며 6시간 동안 통수하였다. 실험 결과 수제의 간격이 4배 미만으로 설치되었을 때 전면부 수제에서 발생하는 세굴의 영향이 후면부 수제 설치지점에 연장되어 나타나는 것이 확인 되었으며 수제간격이 7배 일 경우 전면부 수제에서 발생하는 최대세굴과 같은 세굴심이 관측되었다. 또한 수제간격이 4배이상으로 설치될 경우 후면부 수제에서 독립적인 세굴이 발생하고 있었는데 이는 직각수제 세굴과 동일한 현상으로 나타났다.

• Journal of the Korean Geosynthetics Society
• /
• v.6 no.2
• /
• pp.21-26
• /
• 2007

The tensile properties of geogrid are affected by such factors as temperature, specimen length, gauge length, testing speed and measuring equipment. The tensile strength of geogrids can be determined by ASTM 06637 and ISO 10319. The main differences between two testing methods are testing speed and specimen length. This paper presents the results of the wide-width tensile tests for three geogrids according to different specimen length and tension speed.

• Korean Journal of Optics and Photonics
• /
• v.12 no.4
• /
• pp.300-304
• /
• 2001

We suggest a method to measure and correct bending deformation in piezoelectric ceramics displacement. The angle and direction of the bending deformation are measured by monitoring the position of a laser beam reflected on a mirror which is attached to the piezoelectric ceramics with the uncertainty of the angle measurement of $0.36\mu$rad. We divided the electrode of a piezoelectric ceramic into 3 parts and connected 3 capacitors to each electrode in order to apply different voltage to each electrode with one voltage supplier. The deformation was corrected by adjusting the capacitance of each capacitor and was reduced to 6.3%, comparing to the uncorrected case. By using this corrected piezoelectric ceramic to modulate the length of the ringdown cavity, the fluctuation of the decay time caused by the change in optic axis of the cavity was removed.emoved.