• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.122-129
• /
• 2014

Due to remarkable market growth of smart devices, higher performance and more functionalities are required for a core system-on-chip (SoC), and thus the power demand is rapidly increasing. However, aggressive shrink of CMOS transistor have brought severe process variations thereby adversely affected the performance and power consumption under strict power constraint. Voltage binning (VB) scheme is one of the effective post silicon tuning techniques, which can reduce parametric yield loss due to process variations by adjusting supply voltage. In this paper, an optimal supply voltage tuning based voltage binning technique is proposed to reduce average power without an additional yield loss. Considering the different LVCC margins of process corners along with speed and leakage characteristics, the proposed method can optimize the deviation of voltage margin and thus save power consumption. When applying on a 30nm mobile SoC product, the experimental results showed that the proposed technique reduced average power consumption up to 6.8% compared to traditional voltage binning under the same conditions.

• The Journal of the Korea Contents Association
• /
• v.5 no.1
• /
• pp.201-208
• /
• 2005

Tn this paper, we evaluate the peak-to-average power ratio (PAPR) performance in a space-time block code (STBC) multi-input multi-output orthogonal frequency division multiplexing (MIMO-OFDM) system using selected mapping (SLM) and partial transmit sequences (PTS) approaches. SLM and PTS methods are used to decrease the nonlinear distortion and to improve the power efficiency of the nonlinear high power amplifier(HPA) in the MIMO-OFDM system. In simulation result, when compared with the existing MIMO-OFDM system using QPSK, the PTS method reduces the PAPR about 5dB while the SLM method can reduce about 3.5 dB. Also, we find the BER performance of the MIMO-OFDM system with and without the predistorter in front of the HPA. When the predistorter is used, the input back-off (IBO) of 4 dB is required in the PTS method, and IBO of 6 dB in the SLM method to closely conform to the linear amplifier. If the method of improving the PAPR is not used, the value of IBO of 8 dB is required.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.7
• /
• pp.29-36
• /
• 2007

According to the using of electric power source such as solar cell, fuel cell and wind energy, consumer is supplied from distributed generator and electric power company. Therefore, it is required that the real-time measurement and control instrument for those distributed generator. In this paper, describes the development of measuring equipment for the power system with distributed generator. The equipment has real-time measure function and communication with PC via USB port, which is used for various purposes such as investigation of transient state, and is compared with measurement instrument to verify the reliability.

• Clean Technology
• /
• v.23 no.4
• /
• pp.441-447
• /
• 2017

The economic analysis for the power plant developed in the conceptual design phase is becoming more important and, research on process optimization for process development that meets the target economic is actively carried out. In the filed of power generation systems, economic assessment methods to predict the levelized cost of electricity (LCOE) has been widely applied for comparing economic effect quantitatively. In this paper, the platform that design criteria of key component required to optimize economic of power cycle can be calculated reversely was established roughly and design criteria of the key equipment (Compressor, turbine, heat exchanger) required to meet the target LCOE (the LCOE of supercritical steam Rankine cycle) was derived when the supercritical $CO_2$ power cycle is applied to the coal-fired power plant.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.148-155
• /
• 2002

A study on the installation angle of solar panels is conducted as a conceptual study on solar-RFC(regenerative fuel cell) system for stratospheric airships. The airship heads for the west in winter days and the east in summer days according to wind directions. Considering this, it is found that when the solar panel is installed with the center angle of 30 degree the energy output of solar panels is maximized on winter solstice and satisfies the required energy of summer days as well. Although with the optimized solar panel installation angle, efficiency of the regenerative power system needs be improved to 47% to provide required energy of a 170m-long airship. And the required amount of efficiency improvement decreases as the airship size increases.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.151-155
• /
• 2004

Millimeterwave OFDM wireless LAN system has been modeled for ACPR analysis. With simple AM-to-PM modeling for power amplifier and system simulation technique, power amplifier ACPR is simulated for OFDM modulation, Also, amplifier back-off value satisfying the required ACPR and the ACPR degradation have been predicted with the measured and modeled AM-tn-PM distortion.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.3
• /
• pp.86-93
• /
• 2008

The multi-mode terminal modem which is capable of accommodating a variety of wireless communication standards needs versatile arithmetic units for processing a variety of word lengths and wide range of data rates. Since the target hardware is usually designed to meet the required highest performance, it is often wasteful in power consumption especially when low rate data processing cases. Thus, a speed and power adaptability of the arithmetic unit is a desirable feature for the wireless applications. In this paper, we propose a power efficient versatile adder architecture with carry skip logic as a basic building block constructed in hierarchical manner. The validity of the architecture is shown with respect to size, performance, and power efficiency in diverse operating modes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7A
• /
• pp.557-567
• /
• 2005

We evaluate the BER performance of OFDMA system for Wibro services in frequency selective Rayleigh fading channel, considering the carrier frequency offset and the nonlinear high power amplifier. In the uplink OFDMA, nonlinear amplifier and frequency offset introduce larger BER degradation than in the downlink. We explain the reason and obtain the required output back-off of the nonlinear amplifier and value of frequency offset for good BER performance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.4
• /
• pp.425-432
• /
• 2014

Necessity of compact X-band solid-state weather radar is required to provide weather data, which generate locally in a lot of Korea's mountainous area, rather than tube-type radar. Solid State Power Amplifier (SSPA) for using Dual-polarization method in weather radar is able to obtain desired high output by combining many low output power devices in parallel. Thus, Power combiner applying to high-output power amplifier has disadvantages such as path loss, ballast resistance problem by high frequency and high power, heat release. Therefore, In this paper we demonstrated the excellence of isolation, which is the result from modified Gysel power combiner. As a result, we designed X-band 250W solid state power amplifier with peak power 54dBm, 25% power efficiency for weather radar.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8A
• /
• pp.868-878
• /
• 2004

In this paper, we analyse feasibility of Zone-based Power Control (ZPC) scheme introduced for CDMA forward link(1) in the reverse link. To operate ZPC scheme in the CDMA systems the maximum power level that can be allocated to each traffic channel should be determined. Because all the service channels share the whole power resource in the forward lint a specific mechanism that determines Maximum power resource to each traffic channel is required to operate ZPC scheme in the forward link. However, ZPC scheme can be easily adopted to the reverse link, because of the fact that the whole power resource of service terminal is only confined to its traffic channel. In other words, we need not to determine the maximum power resource to be allocated in the reverse traffic channel. Simulation results show that ZPC scheme adopted to the reverse link yields a significant performance improvement compared with the conventional TPC(IS-95 TPC) scheme in terms of the power consumption and the traffic capacity of Portables, especially with the increasing number of high-rate data traffics. With the proposed scheme, not only be extended the service coverage of high-rate data traffic to the entire cell service coverage, but also the QoS of low-rate traffic can keep going through the service time, especially, in the situation that the incoming interference is much larger.