• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.233-235
• /
• 2003

The realization for power measurement system to analyze and improve the external distortion with DSP is presented. The system is composed of RF, DSP and communication module, and take the Wigner distribution algorithm to remove the external distortion. The experiment result has SNR as $\pm$0.5dB to be improved than existing system.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.309-313
• /
• 1998

고성능 서보 전동기 시스템을 구축하기 위해서는 저속영역과 고속영역을 포함하는 넓은 속도영역에서의 정확한 속도검출을 통한 정밀한 속도제어기 필수적이며, 관성모멘트와 같은 전동기의 파라메터 변동에 대해 강인한 속도제어와 외란 억제능력도 중요한 요소로서 고려되어야 한다. 변동하는 부하의 관성모멘트을 식별하여 PI 속도제어기를 실시간으로 적응 동정하고, 플랜트 잡음과 측정잡음을 고려하는 상태 관측기인 칼만필터의 부하관성에 대한 민감성을 제거하기 위해 이를 적응 동정하여 적응 상태 추정기를 구현함으로써 우수한 속도 추정 성능을 얻었다. 또한 외란과 불확실한 모델링은 등가 외란으로 추정되어 전향적으로 보상된다. 본 논문에서는 이러한 특징을 이용하여 전동기의 고성능 속도제어를 구현하고 유도전동기를 이용한 실험을 통하여 연구결과의 유효성을 확인한다.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.51-52
• /
• 2007

이 논문에서는 다중입출력 선형 시스템에 대한 외란 관측기설계 방법을 제안하고자 한다. 제안된 방법을 특이 섭동(Singular Perturbation) 이론을 사용하여 해석하며, 그 결과 Q 필터의 상수가 매우 작다면 외란 제거와 시스템 불확실성에 대한 보상을 통하여 실제 시스템을 공칭 시스템으로 근사화 시켜주는 것을 볼 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.1
• /
• pp.103-109
• /
• 2007

A new steel sheet pile of wide hat-type was developed. Advantage of using wide type of sheet pile is reducing steel weight and consequently cutting down construction cost. Field driveability tests were conducted in order to verifying vibro-driveability of wide hat-type sheet pile. As a result of the tests, penetration rates of newly developed sheet piles were less than those of U-type sheet piles. Axial stresses developed in sheet pile during driving were fur less than yield stress of sheet pile. Futhermore, initial penetration rates of sheet piles were much larger than those obtained from WEAP program.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1203-1211
• /
• 2017

This paper proposes a robust controller for flexible joint robots to achieve tracking performance and to improve robustness against both matched and mismatched disturbances. The proposed controller consists of a disturbance observer(DOB), passivity-based controller, and integral sliding mode controller(ISMC) in a backstepping manner. The DOB compensates the mismatched disturbance in the link-side and formulates the reference input for the motor-side controller. Interconnection and damping assignment passivity-based controller (IDA-PBC) performs tracking control of motor-side, and it is integrated to nominal control of ISMC to guarantee the over-all stability of the nominal system, while, matched disturbances are decoupled by the discontinuous control of ISMC. In the design of the link-side controller, PD type impedance controller is designed with DOB and this leads the continuous control input which is suitable to the reference input for the motor-side.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.173-179
• /
• 2017

This paper proposes a robust impedance controller for high-DOF robots. The model-based control of a higher DOF robot uses a numerical dynamic model because the analytical dynamic model is difficult to be derived and this means that modeling error is inevitable. The impedance control in the task space is affected by joint motions and has more difficulties in the higher DOF robots. In addition, the disturbances must be decoupled in the control of high DOF robot. This paper proposes a robust impedance controller based on integral sliding mode control (ISMC) and disturbance observer(DOB) for high-DOF robot manipulator. The ISMC is used to improve the robustness of the impedance control and to preserve its nominal performance. DOB is also employed to cancel the effects of input disturbances and to reduce the maximum gain of the ISMC which eventually determines the input chattering size.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.135-142
• /
• 2005

This paper presents an adaptive repetitive control scheme for optical disk drives to track a variable periodic reference signal. Periodic disturbances can be adequately attenuated using the concept of repetitive control, provided the period is known. Because optical disk drives support various speeds, they have the varying periodic disturbances. Based on repetitive control to change sampling frequency to follow the change of reference period, an adaptive repetitive control is proposed in order to deal with such disturbances. The proposed control consists of the repetitive controller and the frequency generator. The former uses a varying sampler operating at fixed multiple times of the disturbance frequency and the latter generates the changeable sampling frequency based on the disturbance frequency. The experimental results on the control of an optical disk drive demonstrate the effectiveness of the proposed schemes and the improvement of random access time as well.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.2
• /
• pp.237-244
• /
• 2012

This paper studies the design of a two-DOF optimal controller for the strip gauge-tension of cold tandem mill processes, that uses a reference shaping filter and a disturbance observer. First, a mathematical model of the strip gauge and tension system is constructed using the gauge meter equation and Hooke's law, respectively. Next, a two-DOF controller considering of a feedforward controller and a feedback controller is designed. The former is based on the reference shaping filter and the disturbance observer, and the latter is based on the ILQ optimal control algorithm. Finally, it is shown through a computer simulation that the proposed optimal controller is able to improve the strip gauge accuracy and the tension variation more than the conventional MV-AGC controller.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.5
• /
• pp.16-20
• /
• 1973

The most important thing in locating disturbances in optimal rapid traffic singnal control is to collect information cocerning toraffit flow by means of a detection method. In order to set up an optimal traffic singnal period, the analysis of a delay time phenomena in the signal period must also be considered. In fact, each of the distributed traffic quantities on the road are not similar factors in view of speeds and distances of succeeding cars. The causing factors are analyzed by the method of control engineering analysis, and they are coincident with disturbance. Thus distubances cause errors. Distubances are fuctions of time, and are classified into three conditions: Natural road state and weather are the first. The second is structures and function of vehicles, and the third is inducedbydrivers. This thesis deals with the last two cases except the first one for maximum utilization of the existing road state and weather conditions. The first condition remains constant, and then there exist some relations between vehicles and drivers. In the long run, it can be shown that the scheme for minimizing whole errors in the optimal traffic signal time setting is definitely presented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.173-174
• /
• 2008