• Journal of Conservation Science
• /
• v.33 no.3
• /
• pp.155-165
• /
• 2017

As interest in the public display of art and outdoor sculptures is increasing, the conservation and treatment of these sculptures is becoming increasingly crucial. Long-term exposure to the natural elements and atmospheric pollution can cause corrosion and deterioration in outdoor sculptures. In the case of Kim Chan Shik's "Feeling", which was exhibited in the outdoor sculpture park at the National Museum of Modern and Contemporary Art (MMCA), the patina of the sculpture was damaged during a long outdoor exhibition. Therefore, the treatment process was as follows: recording of condition, sanding, repatination, and wax coating. Consequently, the sculpture was restored similar to the original. Chemical analysis revealed that the sculpture was crafted from bronze and was cast from a quaternary alloy of Cu-Pb-Sn-Zn. The welding is lower in Zn, Sn, and Pb content than the metal used in the sculpture itself. Bright strains contain about 13.0 wt% Sn and 10.5 wt% Pb. The strains are higher in Sn and Pb content than the rest of the metal in the sculpture (7.0 wt% Sn and 4.4 wt% Pb). As a result of component analysis and microstructure observation, the material is estimated to have been made by casting without artificial treatment.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.12 no.1
• /
• pp.53-62
• /
• 2010

This study was designed to examine whether 'Hongro' apples packaged with natural calcium-coated package papers was fresher maintained than fruit held in not-packaged tray, and whether postharvest physiology of the fruits was affected by calcium-coated papers, or not. The summarized results were as follows; Soluble solids contents and firmness of fruit were higher room temperature(20~25℃) after 4 week and 14 week in cold storage(0~1℃) by calcium-coated package papers. but total acid contents in juice and Hunter a value of peel were trended to decrease in room temperature and cold storage. Weight loss of fruit, decay fruit and CO₂ evolution were decreased by calcium and wax-coated package papers in room temperature storage condition. Also, excellent fruits increased. Ethylene evolution in fruit were not different by package paper and storage condition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.167-167
• /
• 2013

최근 발수 특성은 자동차 표면, 건축 구조물, 가전제품 및 모바일 기기 등 여러 분야에서 사용되고 점차 그 필요성이 대두되고 있다. 이러한 발수성의 표면은 연 잎이나 곤충의 날개, 도마뱀의 발바닥 등 자연계의 여러 곳에서 관찰 할 수 있다. 특히 연 잎의 표면에서 나타나는 초발수 특성이 마이크로와 나노 크기의 돌기 구조와 표피 왁스 성분에 기인한다는 것이 밝혀지면서 이를 응용한 다양한 연구가 진행되고 있다. 본 연구에서는 물리적인 표면처리로 마이크로와 나노 구조물을 형성하고 그 위에 표면에너지를 낮출 수 있는 물질을 증착하여, 발수 특성을 가지는 표면을 개발하였다. 알루미늄 표면에 마이크로 크기의 알루미나(Al2O3) 분말을 이용한 블라스트(blast) 공정으로 마이크로 구조를 형성하고, 선형 이온 소스(LIS)를 이용한 Ar 이온 빔 에칭으로 나노 구조를 형성하였다. FE-SEM 분석을 통해 수~수십 마이크로 구조 위에 나노 크기의 구조가 형성 된 것을 관찰하였다. 마이크로와 나노 구조가 형성된 알루미늄의 표면에너지를 낮추기 위해 trimethylsilane (TMS) 및 Ar을 이용한 플라즈마처리로 표면에 기능성 코팅막을 형성하였다. 그 결과 TMS처리 전에 비해 표면에너지가 99.75 mJ/m2에서 9.05 mJ/m2으로 급격히 낮아지고 접촉각이 $54^{\circ}$에서 $123^{\circ}$로 향상되었다.

• KSBB Journal
• /
• v.27 no.5
• /
• pp.319-323
• /
• 2012

Vitamin C or L-ascorbic acid, an essential nutrient for humans with antioxidative property, was coated with natural wax to be used as functional additives for cosmetics. Coating of vitamin C was performed using carnauba wax and olive wax in self-designed reaction chamber for 60 min. The yield of coated vitamin C with carnawuba wax and olive wax were up to $94.6{\pm}1.2%$ and $82.5{\pm}1.4%$, respectively. The stability of the carnauba wax-coated vitamin C in the lotion was improved 17.8% than that of uncoated vitamin C during 30 day storage at $25^{\circ}C$. Color and the layer separation of the lotion added with the coated vitamin C showed better property than with the uncoated vitamin C. The coated vitamin C can be applied to cosmetic ingredients as a stable additive.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.292-292
• /
• 2013

최근, 자연의 기능성 표면을 모사하여 우리 생활에 응용하기 위한 연구가 활발하다. 초-발수 특성을 가지는 대표적인 예인 연꽃잎은 마이크로-나노 크기의 거친 미세돌기(papillae)를 가지고 있으며 그 위에 낮은 표면 에너지를 가지는 왁스(wax)가 발달 되어 항상 깨끗한 상태를 유지한다. 본 실험에서는 이를 모사하여 RIE (Reactive Ion Etching)방법을 이용하여 기판인 Poly silicon wafer를 Sf6가스를 사용하여 Metal mash로 거칠기를 만들어 주었고, RF-magnetron sputtering 장치를 사용하여 $6{\times}10^{-3}$ Torr의 진공도에서 낮은 표면에너지를 가지는 PTFE (polytetrafluoroethylene)를 증착하여 표면 구조와 발수특성에 대하여 조사하였다. SSME(Surface shape measurement equipment)측정결과 0.24~0.36 um RSa 값이 측정되었고, 12 uL의 Di-water로 접촉각을 측정 한 결과 RIE 10분 처리를 한 기판 위에 PTFE를 3분 증착하였을 때 가장 높은 $153^{\circ}$의 초-발수 특성이 나타났으며, 4주의 시간이 지났을 때에도 접촉각이 유지가 되었다. XPS 측정결과 초-발수 표면에서 나타나는 CF2와 CF3 피크 값이 측정되었다. Reactive Ion Etching을 이용한 PTFE 발수 특성은 방수, 스마트 윈도우, 자가세정(Self-Cleaning), 디스플레이 표시장치, 김서림 방지(Anti-Fogging), 대전방지 코팅 등에 다각적으로 응용 가능할 것이라 사료된다.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2011

In this paper, the air flow induced by the rotating flat disk is numerically investigated in a hope to better understand the air flow structures inside the wax spin coater for a silicon wafer polishing station. Due to the complex inner geometry of actual spin coater such as the casing around the rotating ceramic block and servo motor, recirculation of air flow is inevitably found on the coating target if the internal space of spin coater is closed at the bottom and it could be the possible source of contamination on the wax coating. By numerical flow simulation, we found that it is necessary to install the air vent at the bottom and to apply the sufficient air suction in order to control the path of air flow and to eliminate the air recirculation zone above the spinning surface of coating target.

• Food Science and Preservation
• /
• v.5 no.2
• /
• pp.138-143
• /
• 1998

The stowage effects of Satsuma mandarin(Citrus unshiu Marc. var. miyagawa) were investigated by selecting various pretreatmnents; non-tested, wax-coating, paper packaging, 0.02mm cryovac film packaging. Weight loss of film packaging was the lowest among that of others, but decay radio was increased highly at late stages of storage. Soluble solids, moisture content of peel and total sugar were maintained almost constant, but acid content, vitamin C and firmness were reduced gradually during storage at room temperature. For 100 days storage, losses from weight and decay of ton-treated, paper packaging, wax-coating and film packaging were 15.9%, 18.5%, 17.4% and 12.9%, respectively. Acid content was decreased loom 1.28% to 0.81∼0.91% after 100 days storage. Ethylene evolution was increased in a degree after 65 days storage, and the amount was increased repidly afer 115 days. it seemed to be derived from decayed fruits and physiological activities. CO2 content of inner part of fruits was increased between 40∼100 days after storage. Optimum storage period of early variety of Satuma mandarin was regarded for 100days on the basis of appeareance and taste.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.4
• /
• pp.110-115
• /
• 2017

This research was performed to investigate the mechanical performance of lightweight concrete including phase changing material(Low temperature PCM). Micro capsulised PCM consisted of wax type core and melamine based wall. Also, for PCM of one single kind, paraffin wax was inserted into Vermiculite and the surface was coated with melamine resin. Interfacial polymerization is based on the principle that macromolecule reaction takes place on the surfaces between 1-dodecanol(core material) and water (solvent) to form the wall material. Lightweight concrete has compressive strength of 10 MPa, tensile strength of 1.5 MPa, and oven dried density of 1.0kg/liter which included 10%, 20%, or 30% PCM by weight. To do so, this study fabricated light-weight foamed concrete ($1.0kg/m^3$) in pre-foaming method and mixed it with PCM micro capsule of 1-dodecanol and melamine to examine its physical properties.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.52-57
• /
• 1999

Funtional metal prototypes are often required in numerous industrial applications. These components are typically needed in the early stage of a project to determine form, fit and function. Recent R/P(Rapid Prototyping) part are made of soft materials such as plastics, wax, paper, these master models cannot be employed durable test in real harsh working environment. Parts by direct metal rapid tooling method, such as laser sintering, by now are hard to get net shape, pores of the green parts of powder casting method must be infiltrated to get proper strength as tool, and new type of 3D direct tooling system combining fabrication welding arc and cutting process is reported by song etc. But a system which can build directly 3D parts of high performance functional material as metal part would need long period of system development, massive investment and other serious obstacles, such as patent. In this paper, through the rapid tooling process as silicon rubber molding using R/P master model, and fabricate wax pattern in that silicon rubber mold using vacuum casting method, then we tranlsated the wax patterns to numerous metal prototypes by new investment casting process combined conventional investment casting with rapid pototyping & rapid tooling process. with this wax-injection-mold-free investment casting, we developed new investment casting process of fabricating numerous functional metal prototypes from one master model, combined 3-D CAD, R/P and conventional investment casting and tried to expect net shape measuring total dimension shrinkage from R/P part to metal part.

• Solar Energy
• /
• v.18 no.3
• /
• pp.89-94
• /
• 1998

The heat transfer characteristics of a fluidized bed latent heat storage system using encapsulated PCM was investigated. The cylindrical test section has the dimension of 50 mm I.D. and 40 cm in height. The phase change material(PCM) was the sodium acetate and was encapsulated by the multiple layers of PMMA and paraffin wax. The size of encapsulated PCM was $2{\sim}3mm$ and melting point was $58^{\circ}C$. The instantaneous heat storage and heat release rates were determined and the instantaneous heat transfer coefficient based on the fluidized bed volume was also determined. The effect of inlet temperature and velocity of heat transfer fluid on the heat transfer coefficient was also investigated.