• Journal of Energy Engineering
• /
• v.9 no.3
• /
• pp.157-162
• /
• 2000

기존의 IGCC의 장점인 고효율 플랜트의 특성을 살리기 위해 고온정제를 적용하는 경우 조건변화에 따른 플랜트 성능의 영향을 관찰하고자 본 연구를 수행하였다. IGCC에 고온정제 공정을 적용하여 구성한 모델은 연구 목적에 알맞은 범위의 건전성을 가진 것으로 나타났으며 기타 조건을 동일하게 설정한 경우 저온 정제 공정(MDEA amine) 적용에 비해 플랜트 효율이 약 2.7% 가량 상승하였다. 한편 동일한 고온정제 공정이라도 적용하는 흡수제를 zinc titanate에서 zinc ferrite로 달리 하는 경우 탈황제의 화학 반응상 특성 및 차이점으로 인해 연료가스의 발열량 변화를 유발하므로 결과적으로 약 0.5%의 플랜트 효율 손실이 발생함을 알 수 있었다. 또한 탈황 온도 350~$650^{\circ}C$ 사이의 온도범위에 대해 민감도 분석을 실행하였으며 민감도 분석 결과 전제 온도의 증가와 플랜트 효율은 정비례하지 않으며 50$0^{\circ}C$ 이상의 정제 온도를 적용한 경우는 거의 비슷한 효율을 나타내었다. 이와 같은 결과는 정제 온도를 증가시킴으로 인해 가스터빈에 공급되는 연료가스의 온도는 높아지지만 적용한 가스터빈의 출력 및 연소 온도가 제한되어 있어 고온정제를 적용함으로써 얻어지는 이득을 가스터빈에서 충분히 보상하지 못하고 한편으로 고온정제를 채택함으로써 저온정제 적용시 보다 syngas cooler에서 회수할 수 있는 헌열이 줄어듦으로 인한 증기 터빈 출력의 감소가 커지기 때문으로 분석되었다.

• 방재와보험
• /
• s.116
• /
• pp.30-33
• /
• 2006

화재예방과 보상을 위해 정부가 설립한 전문기관인 한국화재보험협회가 설립된지 33년이 되었다. 그동안 우리나라 화재 안전 기술을 향상시키는 데 선구자적 역할을 해 온 한국화재보험협회의 나아갈 방향에 대해 이야기하고자 한다.

• Korean Journal of Medicinal Crop Science
• /
• v.9 no.3
• /
• pp.232-237
• /
• 2001

This study was carried out to know the effect of light intensity, temperature and $CO_2$ concentration on photosynthesis and transpiration in yacon(Polymnia sonchifolia Poepp.& Endl.). Light compensation point was ${58\;{\mu}mol\;m^{-2}\;s^{-1}}$and light saturation point was ${1708\;{\mu}mol\;m^{-2}\;s^{-1}}$. Transpiration rate was increased to about 4 mmol${m^{-2}\;s^{-1}}$ with increasing of light intensity to ${2193\;{\mu}mol\;m^{-2}\;s^{-1}}$. The optimum temperature for photosynthesis was ${24^{\circ}C}$ in air. Photosynthesis was gradually reduced as transpiration rate increased from 4 to 8 mmol ${m^{-2}\;s^{-1}}$ in different air temperature. $CO_2$ compensation point was 63 vpm and $CO_2$ saturation point was 1155 vpm and light saturation point was enhanced with increasing of $CO_2$ concentration from 350 vpm to 1300 vpm.

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.1
• /
• pp.1-4
• /
• 2002

This study was carried out to know the effect of light intensity, temperature and $CO_2$ concentration on photosynthesis and transpiration in Hovenia dulcis Thunb. Light compensation point was $2.4\;{\mu}mol\;m^{-2}\;s^{-1}$ and light saturation point was $1033\;{\mu}mol\;m^{-2}\;s^{-1}$. The optimum temperature for photosynthesis was $25^{\circ}C$ at $1000\;{\mu}mol\;m^{-2}\;s^{-1}$ light intensity. $CO_2$ compensation point was 67 vpm and $CO_2$ saturation point was 707 vpm. Transpiration rate was increased to about $2\;mmol\;m^{-2}\;s^{-1}$ with increasing of light intensity to $1750\;{\mu}mol\;m^{-2}\;s^{-1}$ and to above $4\;mmol\;m^{-2}\;s^{-1}$ with increasing of temperature from $18^{\circ}C$ to $36^{\circ}C$. however It was gradually reduced as $CO_2$ concentration increased from 21 vpm to 800 vpm.

• Korean Journal of Optics and Photonics
• /
• v.33 no.6
• /
• pp.287-294
• /
• 2022

This study presents a method for designing an athermal middle wavelength infrared (MWIR) zoom lens with the iterative selection of material compositions on an athermal glass map. The optical properties of glass for MWIR are generally very sensitive to temperature, compared with visible glass. To compensate for focus error due to temperature change, the non-athermalized zoom system requires a large amount of movement of a compensator, which results in an unstable zoom system. To solve this problem, the material compositions for an athermal zoom lens have effectively been obtained using the thermal aberration correction process analytically on an athermal glass map. An expander lens is used to enlarge the focal lengths of an original main zoom lens two times. Finally, while this expander is attached to an original athermal zoom system, the final zoom system equipped with this expander doubles the focal length ranges and has stable performance over a specified temperature range.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.7
• /
• pp.54-60
• /
• 2007

We constructed a fiber-optic temperature sensor system using a sensor array with 15 fiber Bragg gratings for distributed temperature monitoring in electrical power systems. A polynomial fitting algorithm was used to compensate the nonlinear action of the MEMS tuneable wavelength filter used for Bragg wavelength demodulation Fixed passband wavelengths from a Fabry-Perot ITU filter were used as reference wavelengths for the fitting algorithm which obtained constant accuracy regardless of the wavelength scanning range and frequency. About 0.18[%] of linearity error compared to reference thermocouple thermometer has been obtained in the preliminary experimental results.

• Korean Journal of Materials Research
• /
• v.7 no.11
• /
• pp.981-985
• /
• 1997

열증착법에 의해서 온도 85$^{\circ}C$인 glass기판 위에 CdS 박막을 제작하였다. 두께가 200nm정도로 측정된 CdS박막은 공기 중에서 온도 25$0^{\circ}C$-55$0^{\circ}C$범위에서 각각 30분간 열처리 되었으며 이들 시료에 대하여 4-point probe, XRD, SEM, UV-Spectrophotometer 및 광발광 측정으로 전기적 광학적 특성을 조사하였다. 이들의 일련의 실험값은 열처리 온도 37$0^{\circ}C$ 근처에서 구조의 변화를 보여주었는데, 열처리 온도에 대한 비저항아니 XRD, SEM 의 측정은 cubic로부터 hexagonal구조로의 변환을 나타내었다. 특히 상온에서 측정한 광발광에서 green edge emission(GEE)피이크가 2.42eV를 나타내었는데 이 때의 발광 중심은 열처리할 때 생긴 S-vacancy에 보상된 산소로 이루어진 'CdO'의 악셉터준위에 기인하는 것으로 해석되며 그 이온화 에너지는 약 0.16eV이었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.882-888
• /
• 2002

This paper proposed a bias stability circuit that compensates the degradation of MMIC's performance for the variation of the process and temperature. The proposed bias circuit proved the superior effect compared with the conventional bias circuit using the constant current source. It designed and fabricated simultaneously two amplifier on one layout for comparison in same conditions. One is amplifier with conventional bias circuit using constant current source and the other is amplifier with proposed bias stability circuit. The chip was measured the microwave performances under process variation that classed the level NOM, MIN and MAX. The amplifier with a conventional bias circuit using constant current source has 6.4 dB gain variation and 7 mA Ids variation at 1.8 GHz, but the amplifier with the proposed bias circuit has the 2.1 dB gain variation and 3 mA Ids variation. As the result, MMIC having the proposed bias circuit shows the superior compensation of the quiescent point than the MMIC having the conventional bias circuit under the variations of the process and temperature and can improve the yield of the MMIC. The fabricated chip size is 1.2 mm $\times$ 1.4 mm.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.4
• /
• pp.467-481
• /
• 2013

The study examined the main effect of the reward channel and reward time of customer loyalty programs for on-offline shopping channels; in addition, it investigated the interaction effect of the reward channels and merchandise as well as the interaction effect of the reward time and merchandise. An online apparel shopping web experiment was conducted with a 2 (reward channel: online channel reward vs. offline channel reward) ${\times}2$ (reward time: immediate vs. delayed) ${\times}2$ (merchandise: online channel product vs. offline channel products) between-subject factorial design. An online shopping channel was considered the core-shopping channel and a department store was considered the cross-shopping channel. Loyalty program value, core-channel loyalty and cross-channel loyalty were measured as dependent variables. A total of 845 shoppers (who had experiences in shopping in both channels) participated in the experiment. The results of the study revealed (1) the main effect of the reward channel on loyalty program value, core-channel loyalty and cross-channel loyalty [online>offline channel rewards], (2) the main effect of reward time on loyalty program value, core-channel loyalty and cross-channel loyalty [immediate>delayed reward], and (3) the interaction effect of the reward channel and merchandise on loyalty program value, core-channel loyalty, and cross-channel loyalty. (4) Finally the study found that loyalty program value affected cross-channel loyalty indirectly through core-channel loyalty. This study suggested diverse theoretical and managerial implications for multi-channel retailers.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.493-494
• /
• 2016

본 논문에서는 계통연계형 단상 인버터의 데드타임 영향을 보상하는 새로운 알고리즘을 제시한다. 데드타임은 전력용 반도체 스위치를 제어하기 위한 PWM 신호 출력시 인버터의 동일 레그에서 두 스위칭 소자가 동시에 턴-온 되는 경우 발생하는 단락을 방지하기 위해 삽입된다. 이러한 데드타임은 인버터 출력전압에 전원주파수의 기본파 및 홀수차 고조파를 야기하며 그로 인해 상전류 역시 왜곡이 발생된다. 본 논문에서는 H-bridge 인버터의 구조를 가지는 계통연계형 단상 인버터에서 데드타임에 의한 인버터 출력전압 및 상전류의 영향을 분석하고 계통측 상전류에 포함된 고조파 성분을 제거하기 위하여 SOGI(Second-order Generalized Integrator)를 활용한 새로운 보상 알고리즘을 제안한다. 시뮬레이션과 실험을 통해 제안하는 알고리즘의 효용성을 검증한다.