This paper presents a compensation method for a temperature-dependent gain tilt in L-band erbium-doped fiber amplifier using a voltage-controlled attenuator. The gain tilts in the L-band of 1570-1605 nm due to a temperature change have negative slopes, whereas they have positive slopes for the increasing optical input powers in a saturation region. The proposed method utilizes these opposite gain variations to compensate for the gain tilt over a wide range of temperature. While applying forty channels with a channel spacing of 100 GHz in the L-band and changing the ambient temperature from 0 to $50^{\circ}C$, the compensation method maintained the gain deviation within 1 dB.
실리콘 마이크로머시닝 기술과 바이폴라 공정으로 집적화된 압력센서를 제작하고 동작특성 평가를 수행하였다. 센서부 보상파라미터를 추출하였고 트리밍 공정을 통하여 출력전압의 보상을 수행하였다. 센서 특성은 압저항 위치, 마스크 정렬 오차, 다이어프램 정밀두께제어 정도, 보호막의 과도식각 정도 등에 의하여 민감하게 좌우됨을 알 수 있었다. 웨이퍼별 샘플추출을 통하여 센서부 감도는 평균 0.653mV/kPa, 감도의 온도계수는 -2078.8ppm/℃, 옵셋 전압은 30.78mV, 옵셋전압의 온도계수는 32.11㎶/℃로 측정되었다. 추출된 샘플의 다이어프램 두께오차는 27±2.5㎛였다. 센서부 특성평가 결과를 통하여 신호처리회로의 옵셋 및 스팬보상, 온도보상을 위한 트리밍 공정을 수행한 결과 개발사양을 만족하는 결과를 얻을 수 있었다.
TSI IFA 100 Thermal anemometer와 같이 자동화된 유속계라 할지라도, 사용자가 조정해야 하는 과열비, 인덕턴스 등과 같은 인자가 있다. 이와 같은 조정의 문제 외에도 오차를 고려해야 하는 많은 요소가 있다. 이들 중 주위 유체의 온도 변화에 대한 영향 등에 깊은 이해를 가지고 있어야 정밀계측을 가능하게 할 것이다. 그 예로서 자동차에서 사용되는 정온도형 열선유속계 형의 공기유량계는 주위온도 보상을 위한 회로가 내장되어 동절기와 하절기 사이의 온도차를 보상하고 있다.
KSCE Journal of Civil and Environmental Engineering Research
/
v.31
no.1C
/
pp.29-38
/
2011
The smaller diameter cone penetrometer has been widely used to estimate the characteristics of local area due to high vertical resolution. The half-bridge cirucits have been adopted to measure the mechnical strength of soil through the smaller diameter cone penetrometer due to the limitation of the areas for configuring the full-bridge circuit. The half-bridge circuit, however, is known as being easily affected to the temperature variation. The objective of this study suggests the temperature-compensated method in mini-cones. The diameter and length of the mini-cone is designed to 15mm and 56mm. The load cell of the mini-cone is extended about 54mm on the behind of the mini-cone to reflect the only temperature variation. The full-bridge circuit is installed to measure the temperature-compensated values in the mini-cone and the half-bridge circuit is also organized to compare the temperature compensated values with uncompensated values. The seasonal variation tests are performed to define the effect of temperature variation under summer and winter temperature condition. The densification tests are also carried out to investigate temperature effects during penetration. The measured mechanical resistances with temperature-compensated method show more reliable and reasonable values than those measured by thermal uncompensated system. This study suggests that the temperature-compensated method of the mini-cone may be a useful technique to obtain the more reliable resistances with minimizing the temperature effect.
본 논문에서는 임계 도통 모드 boost PFC의 입력 필터 효과를 보상하기 위한 온-타임 변경 기법에 대하여 제안한다. 임계 도통 모드 boost PFC의 입력 필터는 총 입력전류의 위상을 진상으로 만들게 되며, 이 영향은 성능의 하락을 초래하게 된다. 본 논문에서는 디지털 boost PFC의 진상 전류를 보상하기 위한 온-타임 변경 profile을 제시하였다. 제안된 방법의 효과는 90-230Vrms 입력, 200W 출력의 prototype 의 실험을 통하여 검증되었다.
Proceedings of the Korean Institute of Intelligent Systems Conference
/
2000.11a
/
pp.323-332
/
2000
정밀을 요하는 자동차 부품의 측정 시스템은 온도에 따른 보상이 필수적이다. 부품의 측정값의 신뢰도를 유지하기 위해서 단순히 제품의 합격 영역을 상온에서 51.786~51.819mm로 했을 때, 온도가 상온에서 떨어져 있는 경우 그 부품의 측정영역을 신뢰하기가 어려워진다. 본 논문에서는 이 문제를 해결하기 위해서 2개의 카메라를 사용하여 한쪽은 표준 제품을 두고, 다른 쪽은 실제 제품을 두므로서 온도에 따라 달라지는 표준 제품의 측정값의 Offset를 실제 제품에 반영하므로 측정값을 보상하려고 하였다. 자동차의 부품은 여러 가지가 있으나, 이 중에서 현재 공장에서 측정에 어려움을 겪고 있는 에어콘 스윗치인 마그네트 코일 하우징을 대상으로 하였다. 특히 측정 대상이 크고, 카메라의 화소수가 40만 이하일 경우, 측정의 중요한 포인트는 화소수이기 때문에 이를 정확히 알아 내는데, FCM(Fuzzy C-means) 알고리듬이 좋은 결과를 주지만 속성 공간에서 유사성만을 고려하고, 공간영역에서 유사성을 고려되지 않기 때문에 FCM은 \"equal evidence\"와 \"ignorance\"를 구분하지 못한다. 이를 개선하기 위해서 FCM를 수정하여 먼저 FCM로 처리하고 하고 이를 바탕으로 PCM(Possibilistic C-means)를 사용하였다. 결과를 모니터에 보여주고, RSC-232 포트를 통하여 신호를 마이크로프로세서에 전달하여 제품의 양호(good), 불량(bad)을 판별하는 신호를 발생하게 하였다.을 판별하는 신호를 발생하게 하였다.
Journal of the Korean Institute of Telematics and Electronics
/
v.4
no.3
/
pp.28-33
/
1967
The analysis of differential amplifier is simplified by the extention of bisection theorem. In order to reduce the thermal and porwor drifts, a self compensating circuit is employed. The optimum conditions of the self compensating circuit are: the base-emitter voltage of one transistor should be equal to the other's base-emitter voltage for basic self compensating circuit, the tempereature coefficients of base-emitter voltage of one transistor equal to the others for thermal compensation. By regarding the thermal and power drifts the experiments were performed were performed and the numerical results were consistent with the measured values.
Park, Won-Woo;Kim, Byung-Chul;Cho, Kyung-Rae;Lee, Jae-Buom
Journal of the Korea Institute of Information and Communication Engineering
/
v.14
no.12
/
pp.2609-2614
/
2010
Temperature compensation circuit is implemented by using the temperature sensor, and Intermodulation (IM) Specification of Power Amplifier is satisfied in the temperature range of $-30^{\circ}C{\sim}60^{\circ}C$ with this temperature compensation circuit. The output voltage of temperature compensation circuit which vary 170mV with the temperature is applied to the gate of TR in 3W output power Amplifier. As the result, right 3rd IM component is -18.5~-26dBm, left 3rd IM component is -18.5~-35dBm, and the left and right 5th IM component is -24~-26dBm in the temperature range of $-30^{\circ}C{\sim}60^{\circ}C$. It is confirmed that IM specification of power amplifier which is under -17dBm in the whole temperature range is satisfied.
본 논문은 비대칭 2상 SRM의 센서리스 속도제어를 위한 초기각 검출 및 초기 기동방식과 자속관측기를 적용한 센서리스 제어에서 전동기의 온도 및 파라미터 변동에 의한 자속 오차 성분으로 인해 발생하는 위치 추정오차를 보상하기 위한 새로운 보상기를 제안한다. 제안된 방식은 전압펄스 인가로 초기각을 검출하고 검출된 초기 위치정보를 바탕으로 동일한 전압펄스 인가를 통해 비여자상이 여자상이 되는 회전자 위치를 검출하여 상여자를 교체하는 초기기동을 통해 자속관측기를 적용한 센서리스 제어로 안정적으로 진입하도록 한다. 이 때, 제안된 추정위치 보상기를 통해 추정된 센서리스 위치를 순시적으로 보상한다.
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
2011.05a
/
pp.673-675
/
2011
본 논문은 GHz 대역 소자 응용을 위한 프로그램 가능 보상 회로를 제안한다. 이러한 회로는 5.2GHz대에서 동작하는 고주파 회로의 칩 제작과정에서 예기치 않게 발생한 미세한 PVT (공정, 전압, 온도) 변동을 검출하여 미세 변동된 회로 성능 변수들을 자동으로 보상한다. 자동으로 보상 가능한 고주파 회로 성능 변수들은 중요한 요소인 입력 임피던스, 전압이득과 잡음지수를 포함한다. 이러한 회로는 미세 변동을 자동으로 보상할 수 있도록 고주파 신호를 직류 신호로 변환하는 DFT (Design-for-Testability) 회로를 포함한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.