• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.3
• /
• pp.398-405
• /
• 1995

In termperate zone planting rice at different date subjects the crop to different climatic condition. This study aimed at comparison of the change in source-sink relationship of the Japonica(J) and that of Indica Japonica(I$\times$J) type rice cultivars caused by shift of heading date. Two J-and two I$\times$J-type cultivars were made to head on Aug. 16, Aug. 26 and Sep. 5. Percent grain fertility was not changed in response to shift of heading date. Ripening patterns of 4 rice cultivars were similar to sigmoid curve type but when the heading date was delayed to Sep. 5, the form is changed to log type of curve. In J-type, physiological maturity was delayed about 5 day when headed at Sep. 5, in compare to headed at Aug. 16 and Aug. 26. However ripening was continued about 10 days when the diurnal, nocturnal and minimum temperature was above 17, 12$^{\circ}C$ and about 3~8$^{\circ}C$. In I$\times$J hybrid, real ripening was continued when the diurnal, nocturnal and minimum temperature was over 20, 17$^{\circ}C$, but if the minimum temperature was downed bellow 1$0^{\circ}C$, it was impossible. Simulated photosynthetic amount based on photosynthetic ability, temperature, leaf area and day length was varied according to changes in heading date and it was decreased seriously if the minimum temperature was fall down bellow 4$^{\circ}C$ in field, that's why decrease in photosynthetic ability and aging. The temperature range of optimum ripening was 21~26$^{\circ}C$, if there is nothing hindering factor.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.411-415
• /
• 2008

This paper presents on design factor considered in an altitude test cell facility to determine the best sizing to optimize exhaust diffuser pressure recovery and the exact cooling load required to be supplied under transient operation. Engine simulation was performed to analyse the exhaust gas temperature, exit mass flow rate, specific fuel consumption and exhaust velocity helpful in determining secondary mass air flow and the mixed air temperature entering the ejector. based on this, the amount of cooling load was deduced. It was found that improved pressure recovery reduces operational cost(air supply facility, cooling water).

• Journal of Korean Living Environment System
• /
• v.16 no.2
• /
• pp.89-100
• /
• 2009

The present study was designed to observe the thermal dynamics of core and skin temperatures during sub-maximal treadmill exercise; to investigate the effect of regional body cooling during short rest after the treadmill exercise on the thermal dynamics. Three conditions (No cooling, Head/Hand cooling, Leg cooling) were simulated in a climatic chamber at 24±1℃ and 50±5%RH. Subjects performed two bouts of treadmill exercise at a rate of 80%HR_max followed by rest. Body cooling with a hood, long gloves, and a blanket that circulated water set at 15℃ was assigned during two bouts of rest. The results showed that (1) rectal temperature (T_re) did not show significant difference between three conditions; (2) Skin temperatures had specific features, depending on body regions. In particular, the initial fall phenomena of skin temperatures at the onset of exercise were noteworthy in the chest, thigh, calf, and finger tip. Of these, the most significant initial fall was found in finger temperature (T_fing). (3) During the period of the initial fall in skin temperatures, T_re gradually increased. (4) The magnitude of the fall of T_fing at the onset of 2^nd running was on average 4.8, 5.1 and 3.4℃ for Control, HH cooling, and Leg cooling, respectively (p<0.05). The initial drop of T_fing at the onset of running was maintained for an average of 8.1, 7.9 and 6.3 minutes for Control, HH cooling, and Leg cooling, with no significant differences. In conclusion, the initial fall phenomena at the onset of treadmill exercise reflected non-thermal factors, as opposed to internal thermal status. The magnitude of the initial fall in T_fing was affected by legs cooling. Therefore, the initial fall phenomenon should be considered when interpreting the thermal status of the shell during heavy works/exercises that assigned with intermittent regional body cooling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.866-872
• /
• 2010

In this paper, we developed a digital soldering station based on PID controller, which supply stable power by controlling the current of heater of soldering iron. The proposed system designed PID controller to converge quickly to the set up temperature by user, and regain the lost of heat by external factors quickly. PID controller, designed by Ziegler-Nichols' tuning method, decides triac's trigger timing using setting temperature and present temperature to control the phase of AC 24V power that supply to the heater. Also, we give the function that shows present temperature and setting temperature of iron, and working time by graphic LCD. And during the rest time, we decided the power saving and extension of iron tip by dropping to the optimal temperature. Two experiments had implemented in $25^{\circ}C$ laboratory to confirm the performance of proposed method. The first experiment took 12sec, 13sec, 16sec, 18sec, reaching to $200^{\circ}C$, $300^{\circ}C$, $400^{\circ}C$, $480^{\circ}C$ respectively which result showed shorten of rising time than previous method. In the loading experiment of $300^{\circ}C$, $400^{\circ}C$, $480^{\circ}C$ steady state showed temperature drop of $3.8^{\circ}C$, $4.1^{\circ}C$, $4.5^{\circ}C$ which result showed the low temperature deviation than previous method.

• Journal of the Korean Vacuum Society
• /
• v.19 no.3
• /
• pp.169-176
• /
• 2010

Cryopumps can provide economical profits with a relatively high pumping speed per size. However, it is somewhat doubtful that pumping performance of cryopums, which is very sensitive to the temperature of the adsorption panel, can be maintained or recovered fast for large continuous or impulsive gas loads. The official evaluation items indicating cryopump performance for gas loads are the maximum throughput and the crossover value. There are two other, unofficial but widely used, items, the Ar recovery time and gulp characteristics. Although these evaluation items look absolutely different with each other, there are close relations and even duplications in their test schemes. Therefore, it is necessary to study how to improve practically each test procedure, and combine or unify some procedures.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.273-280
• /
• 2023

The purpose of this study is to investigate the effect of functional bedding of ceravida recovery materials on muscle fatigue, brain waves, and heat in the cervical spine before and after sleep. The subjects of the study were 12 women in their 50s or older in D Metropolitan City who complained of insomnia due to sleep disorders and cervical pain. The results of this study first showed that functional bedding lowered muscle tension. Second, the skin temperature of cervical spine increased statistically significantly for both functional and general bedding. Third, there was a statistically significant difference in EEG(alpha, beta, theta, delta) of functional bedding. Through these results, it is considered that functional bedding of ceravida recovery material has sufficient effect on sleep recovery technology.

• Journal of Korean Society of Forest Science
• /
• v.56 no.1
• /
• pp.51-65
• /
• 1982

The growth characteristics and appropriate fertilizer-managements in the rejuvenating bamboo grove were studied with Phyllostachys reticulata. The bamboo soil was the sandy loam with rich humus. In the fertilized plots, the N-fertilizer was significantly absorbed, and it was necessary to fertilize the K-fertilizer continuously. According to the development of rejuvenating after flowering, the temperature and relative illumination became lower. while the moisture became higher. The relationship between the diameter at eye height (D) and the culm length (H) of each bamboo can be expressed as follow; $H=2.5538D^{0.5031}$ The leaf area is the major factor for the production of the bamboo grove. Therefore in the rejuvenating grove, we should refrain form pruning or felling of not -flowering bamboo. The theoretical distribution of the internodal length was obtained by the distribution curve line of the internodal length derived from the regular distribution curve line. Relatively long and even internodal length was found in the fertilized plots 2 and 4. The relation between $D^2H$ and dry weight of culm or dry weight of the above ground part were given by linear regression in both relations respectively on the logarithmic coordinates, but the propertional relation was not established in these relations. The biomass of the above ground part obtained by the allometry method showed high values in the fertilized plots 2.5 and 6. The appropriate amounts of the three elements, N, P and K for the maximum dry matter were 24.19, 15.51, 8.63 kg/10a, respectively.

• Korean Journal of Environment and Ecology
• /
• v.29 no.5
• /
• pp.681-692
• /
• 2015

It is well documented that physiological and nutritional condition of wintering birds is strongly related to migration success to breeding sites, and also breeding success. However, how abiotic factors during winter affect the migration and breeding successes still remains unclear. Thus, this study developed a dynamic-state-dependent model for wintering life-history to identify the potential impact on the life-history, success to breeding site and breeding success of wintering birds, which are related to temperature fluctuation, interspecific competition and human disturbance at the wintering sites. To find the best-fit-model, we referred to the existing research data on wintering ecology of Red-crowned cranes (Grus japonensis) in Cheolwon, Korea, which is well documented as a long-term wintering study. Our model predicted that the higher temperature fluctuation and a higher rate of human disturbance are negatively related to migration success to breeding sites and their fitness, ultimately breeding success via changing of proportion in resource allocation (for e. g., lower energy compensation or higher level of stress accumulation). Particularly, the rate of body mass compensation after arrival at wintering sites may be accelerated when there are less temperature fluctuations and a lower rate of human disturbance. In addition, the rate of interspecific competition sharing the wintering foraging sites is negatively related to the rate of body mass compensation. Consequently, we discussed the conservation strategies of wintering birds based on the outcomes of the model.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1301-1307
• /
• 2011

Electrosurgical knee wand (EKW) is a high-frequency thermocautery instrument and is often used for coagulation, ablation, excision, and extirpation of knee ligaments and tissues. In order to maximize the success rate, ease, and safety of knee surgery using EKW and radiofrequency ablation, it is necessary to ensure that the EKW selectively approaches the lesion with utmost accuracy and safety. The key feature of this instrument is its excellent maneuverability. Hence, the authors constructed a tensile spring model based on a shape memory alloy (SMA), which exhibits the shape memory effect. This model can be used in knee surgery as it is considered the most biocompatible femorotibial surgical actuator. The changes in external temperature with current and the thermoelectric characteristics of the SMA were investigated. The relationship between the restoring force and the typical stroke (TS) in response to the conditions in the SMA tensile spring design were evaluated. In conclusion, as the diameter of the SMA tensile spring decreased, the maximum temperature increased. The strain in the actuator caused a stable and proportional increase in the force and induced current for up to 15s, but this increase became very unstable after 30s. Moreover, the relationship between the current and the TS was more stable than that between the current and the restoring force.

• Journal of Veterinary Clinics
• /
• v.22 no.4
• /
• pp.302-308
• /
• 2005

This study was performed to examine the absolute skin temperature and temperature difference $({\Delta}T)$ between the left and the right, the upper and the lower parts on the back of dog and to investigate the clinical usefulness of infrared thermography as diagnostic or prognostic aid on experimental spinal cord compression by using Digital Infrared Imaging System. In normal dogs, symmetrical and contouring patterns were observed in thermogram. The skin temperature difference was not significant between the left and the right, the upper and the lower parts on the back. In spinal cord compressed dog, there was symmetrical temperature reduction pattern around lesion. Patterns of ${\Delta}T$ between thoracic and lumbar portions were remarkable and showed the tendency to return to normal after 4 weeks of operation. It is considered that infrared thermography is a useful diagnostic and prognostic aid for spinal cord injury in dogs.