• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.509-516
• /
• 2017

In cadastral surveying, there are problems that no area error is allowed where numerical surveying is carried out, and allowable area error is specified irrespective of parcel shape where graphic surveying is carried out. In this research, we derived a general formula of parcel area error necessary for grasping these two problems. The calculations using the derived formula showed that where the coordinate error of the boundary point is set to 5cm+10ppm practically, then even a small parcel of $100 m^2$ includes non-negligible area error of $0.71m^2$. And, it is found that the area error specified by the current egulation is based on a rectangular parcel of 1:5 aspect ratio. These results show that the area error of polygon parcel can be determined by a single formula by specifying the coordinate error of the boundary points, and can be used to revise the current regulations that can be applied uniformly regardless of surveying methods.

• Nuclear Engineering and Technology
• /
• v.22 no.2
• /
• pp.95-100
• /
• 1990

The exact expression for the 1151 force on a fuel assembly in a reactor core is derived in terms of calculable hydraulic parameters. The relation for the lift force. pressure drop, buoyancy force, viscous force. and fuel assembly weight is discussed. Based on the derived exact expression. error analysis is made for a simple expression applying COBRA IV-i to a typical PWR fuel assembly. The error analysis revealed that the error of the simple expression consists of four terms and the overall error depends on the flow rate change direction, and its magnitude is about 1%.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.3
• /
• pp.121-124
• /
• 2007

Ablation depth of cornea in refractive keratectomy was calculated by Munnerlyn formula. The calculations were preformed for various optical diameter (4 mm~8 mm) and various amount of corrections (-1 Dptr ~ -12 Dptr). The results to be compared with the Munnerlyn approximated formula had little effect within lower corrections, but in higher corrections > 6 Dptr can be occurred the error of 1 Dptr. Although ablation depth were evaluated, the results were only calculated by mathematical model of geometric assumptions. Because ablation depth can vary with operation conditions, the correction factor should be considered not only ablation depth by Munnerlyn formula but also surgeon-specific factor.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.2
• /
• pp.74-83
• /
• 2011

For launcher applications, different from other applications, very high flow rate is required which can lead to supply pressure drop against required setting pressure. The supply pressure decrease is closely related to regulator characteristics. In this paper, supply pressure offset is investigated considering regulators as kinds of control systems. Pressure offset of self-operated regulator is analyzed with sensitive parameter defined as the ratio of valve travel to pressure offset. It is shown that pressure offset of self-operating regulator can be improved by incorporating proportional and integral controls and they can be materialized with pilot regulator systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12A
• /
• pp.1244-1250
• /
• 2007

User cooperation provides high reliability in wireless communication systems by employing relay nodes to transmit the same information. In this paper, a bit error rate (BER) study is presented for decode-and-forward (DF) relaying for user cooperation in independent and identically distributed Rayleigh fading channels. For an arbitrary number of relays, exact and closed-form expressions of the BER are proposed for M-ary PAM (Pulse Amplitude Modulation), QAM (Quadrature Amplitude Modulation) and PSK (Phase Shift Keying), respectively. It is also shown that the analytic results are perfectly matched with the simulated ones.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1997.05a
• /
• pp.186-191
• /
• 1997

인공위성을 이용한 강우관측은 지상에서의 강우관측과는 달리 넒은 지역의 관측을 가능하게 하고 또한 해양에서의 강우까지도 관측할 수 있다는 장점이 있다. 그러나 이러한 강우관측도 몇가지 문제점을 포함하고 있는데 그 하나로서 관측오차 문제를 들 수 있다. 이것은 관측된 강우가 공간적으로는 연속이지만 시간적으론 불연속이기 때문에 발생하는 구조적인 문제로서 강우의 시간적-공간적 통계특성과 관측계획에 따라 각각 다르게 정량화 된다. 본 논문에서는 인공위성을 이용한 강우 관측시 발생하는 관측오차의 추정식을 소개하고 두개의 다차원 강우모형을 사용하여 적용해 보았다. 현재까지의 관측오차 추정은 강우의 2차원 통계특성만을 고려하기 때문에 모형의 매개변수들이 이 특성에 맞추어 적절히 추정된 경우, 모델에 따른 차이는 크지 않은 것으로 밝혀졌다. 앞으로 이러한 단점은 2차원 이상의 통계특성을 고려하는, 궁극적으로는 강우의 확률밀도함수를 고려할 수 있는 관측오차 추정식의 개발을 통해 개선될 수 있을 것이다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.3
• /
• pp.468-484
• /
• 1992

본 연구에서는 기존의 유연 볼 엔드밀의 절삭력 모델을 바탕으로 자유 곡면의 정삭 가공에서 발생할 수 있는 과대 또는 과소 절삭을 방지하면서 그 가공의 효율성을 높이기 위한 볼 엔드밀의 이송 속도 결정법을 제시하고자 한다. 먼저, 자유 곡면의 가공에서 발생될 수 있는 공구의 처짐에 따른 가공오차에 대하여 볼 엔드밀 공구의 처 짐벡터와 공작물의 공구 접촉점에서의 법선벡터로 표현되는 가공오차(machining error ) 예측 모델식을 유도하였다. 본 가공오차 예측 모델식은 다시 절삭날당 가지는 이 송량의 함수로 전개되어 그 곡면의 주어진 가공 공차(machining tolerance)를 만족시 키는 이송속도를 결정하게 된다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.6
• /
• pp.661-667
• /
• 2011

Kinematic contact trigger probes are widely used for feature inspection and measurement on coordinate measurement machines (CMMs) and computer numerically controlled (CNC) machine tools. Recently, the probing accuracy has become one of the most important factors in the improvement of product quality, as the accuracy of such machining centers and measuring machines is increasing. Although high-accuracy probes using strain gauge can achieve this requirement, in this paper we study the universal economic kinematic contact probe to prove its probing mechanism and errors, and to try to make the best use of its performance. Stylus-ball-radius and center-alignment errors are proved, and the probing error mechanism on the 3D measuring coordinate is analyzed using numerical expressions. Macro algorithms are developed for the compensation of these errors, and actual tests and verifications are performed with a kinematic contact trigger probe and reference sphere on a CNC machine tool.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.2
• /
• pp.137-145
• /
• 2003

Currently, the availability of 3-D topographical survey by combination of GPS and Echo Sounder has been increased in the various field like as the construction of structure, the dredging and the reclamation in the ocean and river, and observation of topographic change in seabed or riverbed. In this case, the error of depth sounding can divide in form that is happened by combination of GPS and Echo Sounder, and form that is happened in Echo Sounder itself, In this study, in the case happen by Echo Sounder itself, analyzed error by specially about geological features of the seabed and riverbed that is specular surface of sound wave and wished to present solution way. The sounding error about the echo sounder and characteristic of estuary riverbed was found by understanding the relation of average diameter and residual error and we defined correction formula, Y=-0.00474$^{*}$In(X) -0.0045 by the regression analysis. and then we verified applicability of correction formula. As the result, if measure Preliminary investigation or pre-survey the geological features for the survey area at topographical survey of estuary riverbed, we presented the error correction formula that estimate and can correct of error by Echo Sounderer.

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.2
• /
• pp.66-72
• /
• 2000

The purpose of this study is establish a recession curve for low flow discharge in the Ssangchi basin. For this study, we selected 34 recession segments and calculated recession constants and initial discharges. The average initial discharge is 0.40 ㎥/sec and the recession constant is 0.86. With using the initial discharge and the recession constant, We got the non-linear recession cure equation. This non-linear equation is more reasonable fit than the linear equation of the recession curve for low flow.