• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.511-515
• /
• 2012

In this study, we used a commercial simulator to investigate the gasification characteristics of Roto coal in the partitioned fluidized-bed gasifier, which consists of 4 parts such as coal pyrolysis, char gasification, tar/oil gasification and char combustion. The heating medium was exchanged between the combustion part and the gasification part in order to supply the energy needed for pyrolysis and gasification. The correlation model from experimental data in relation to the reaction temperatures, the reaction gases and the coal feed rates was derived for the coal pyrolysis. The equilibrium model was used for the gasification and the combustion model for the char combustion. In order to compare the reaction behavior of the partitioned fluidized-bed gasifier, the single-bed gasifier was also simulated. The cold gas efficiency of both partitioned fluidized-bed gasifier and single-bed gasifier was almost the same. The $H_2$ and $CH_4$ contents of the syngas in the partitioned fluidized-bed gasifier slightly increased and the CO and $CO_2$ contents slightly decreased, compared with the singlebed gasifier. In order to verify the model, ten cases of the single-bed gasification experiment have been simulated. The contents of CO, $CO_2$, $CH_4$ in the syngas from the simulation corresponded with the experimental data while those of $H_2$ was slightly higher than experimental data, but the tendency of $H_2$ content in the syngas was similar to the experiments. In the coal conversion, the simulation results were higher than the experiments since equilibrium model was used for the gasification so that the residence time and contact time in the model is different from the experiments.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.6
• /
• pp.409-414
• /
• 2009

In 1970's Black locust(Robinia pseudoacacia) had been widely planted Korea as an important forest greening species for erosion control afforestation. Since 2000, however, the tree's leaf-yellowing symptom has often been observed at a limited region and then spreaded out over the country in 2006. This study was conducted to study soil physiochemical properties of black locust stands with and without the leaf-yellowing symptom in Osan, Gyeonggi province. Most of soils in sampling sites were mostly slightly eroded, dry, and moderately dry. Available soil depth(16cm) and total soil depth(26cm) in leaf-yellowing (LY) site were significantly lower than in non leaf-yellowing (Non-LY) site's soil depths which were 30cm and 56cm, respectively. And solid phase proportion and bulk density in soils were lower in LY site than in non-LY site soils, while soil liquid phase proportion was also low. It could reflect that LY site soils might have a lower air and moisture movement in the rhizosphere of black locust stand compared with non-LY site soils. Soil acidity in both sites was very strong acid, soil pH (4.42) of LY site was slightly lower than non-LY site's (pH 4.54). Content of available phosphorous, exchangeable $Ca^{2+}$ and $Mg^{2+}$ and percent base saturation were less than LY site. These results indicated that soil physiochemical condition in LY site, more deteriorated than non-LY site, should adversely affect the retention and supply capacity of soil nutrients and moisture. Therefore the black locust may be more sensitive to other environmental stresses.

• Korean Business Review
• /
• v.23 no.1
• /
• pp.45-68
• /
• 2010

Current oversupply of college graduates is the need in the industry, but the absolute lack of manpower and the company's dissatisfaction with graduates of the retraining costs borne by businesses increases with the overall gap between university education and industry is causing a scene. Particularly job-oriented vocational training colleges for the purpose of sahoegak areas of professional knowledge, teaching theory, research, and cultivate talent, and social development of countries required to cultivate professional personnel for the purpose were established. However, the purpose of today's college founded largely on these off, which reflects the needs of industry through the development of the curriculum of colleges established in the original intent and purpose of the on demand came to be intellectually and socially. Reflect the needs of industrial on-site training is the development "of industrial units for each job through the job analysis is required in college to acquire job skills training to be a list of subjects and the importance of each subject and analyzed the incidence and Curriculum Development Reflected in and through which industry and the job comes from the college curriculum to eliminate the gap between research. Research-oriented job analysis methods commonly used in curriculum development, DACUM technique was used, through which subjects daebipyo skills, selection of the companies surveyed set of job model, job creation and the job description and job specification we analyze it using a group of experts to evaluate the interview and questionnaire via WEB to evaluate the results of the educational process.

• Clean Technology
• /
• v.21 no.3
• /
• pp.141-152
• /
• 2015

As environmental issues are emerging, bio-plastic suppliers in leading countries have been foreseeing the strong needs for environment-friendly materials such as eco-packing materials due to increased attention and regulation on recycle. To catch up with the demand, various types of bio-plastics based on natural feedstocks were developed and released on a market. These bio-plastic products drew the great attention even in domestic industries. At present, international oil price fluctuation and heavy charge on waste raise the unit cost of production and disposal expense of conventional plastic materials. These conditions make bio-plastic an alternative, because it is not restrained by oil prices and problem in the disposal. It is also expected that bio-plastic will be applied to various types of products including containers, industrial supplies, disposables, and medical supplies. However, the bio-plastic is still in its infancy, thus more research and understanding should be followed to put it to application. Bio-plastic is considered as environment-friendly material with high potential which has the advantages of production and disposal.

• Journal of Bio-Environment Control
• /
• v.20 no.1
• /
• pp.8-13
• /
• 2011

This research was carried out to investigate relationship between underground part environment control and growth or yield of sweet pepper in greenhouse as affected by covering materials. Daily amount of applied nutrient solution for research period in the greenhouse of plasticfilm house was more 1.6 times than that in glass house. But daily absorptance rate of nutrient solution and specific electrical conductance of rockwool between two greenhouses were not different in the range of 71.3-73.3% and $4.17{\sim}4.23dS{\cdot}m^{-1}$ respectively. Leaf area of sweet pepper, in leaf growth characteristics in two greenhouses, were $123.0cm^2$/leaf (in glass house) and $119.5cm^2$/leaf (in plasticfilm house), but the another (fresh and dry weight, dry matter) were not different. But weekly yield per square meter in glass house was more 1.3 times than that in plasticfilm house as $850g{\cdot}m^{-2}$ and $650g{\cdot}m^{-2}$, respectively. Effect of slab EC and absorptance rate of nutrient solution on leaf growth characteristics and yield between two greenhouses were not different. The results show when sweet pepper is cultured in greenhouse as affected by covering materials and above ground part environment, the plant growth and yield are little affected by underground part environment.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.96-104
• /
• 2013

Coal gasification is considered as one of the best alternatives among clean coal technology and new concept next generation technologies are under being developed to achieve low cost as well as high efficiency. In this study we have developed double swirl multi-burner as part of the development of low cost compact gasifier. We installed new concept multi-burner with pulverized coal distributor to the body of existing gasifier for burner test. Gasification test was performed under the condition of $6.4{\sim}7.2kg/cm^2$ and $1170{\sim}1300^{\circ}C$ by using Indonesian ABK (sub-bituminous) coal to get operation condition of new concept multi-burner. Our interest was focused to ensure a stable operating condition rather than the gasifier performance evaluation. As a result, we were able to achieve the carbon conversion of 84% and the cold gas efficiency of 52.1% at the stable operating conditions.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.4
• /
• pp.399-405
• /
• 2014

We investigated the effects of feeding rate on the growth performance, blood components, and histology of growing olive flounder Paralichthys olivaceus. Optimum feeding rate (initial fish mean weight : $316.7{\pm}6.18g$) was determined under the optimum water temperature. Two replicated groups of fish were fed a commercial diet at rates of 0%, 0.4%, 0.6%, and 0.8% of body weight (BW) per day, and to satiation. Feeding trial was conducted using a flow-through system with 10 1.2-metric ton aquaria receiving filtered seawater at $21-24^{\circ}C$ for 3 weeks. Weight gain (WG) and specific growth rate (SGR) were significantly higher in fish fed to satiation (1.0% BW/day) than in those in other treatments. These parameters were negative and significantly lower in the starved fish than in fish fed the experimental diet at all feeding rates. There were no significant differences in WG and SGR among fish fed at 0.4%, 0.6%, and 0.8% BW/day. Hematocrit and hemoglobin in fish fed to satiation were significantly lower than those in other treatments. Histological changes of fish fed at 0.6% BW/day indicated that this group was in the best condition; differences were not found in tissues of fish fed at 0%, 0.6% and 1.0% BW/day. Broken-line regression analysis of weight gain showed that the optimum feeding rate of olive flounder weighing 317 g was 0.99% BW per day at the optimum water temperature.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.62-62
• /
• 2003

과학위성 1호에는 위성의 임무를 수행하기 위하여 광학계, 구조부, 및 전자부 등 여러가지 부품들이 실장되는데, 그 중 전자부의 가장 중요한 부품 중의 하나인 인쇄회로기판(Printed Circuit Board, PCB)의 우주환경에서의 특성 대해서 논의하고자 한다. Solder Resistor(Solder Mask)의 화학성분이 위성체가 작동하는 우주환경에서 위성체 임무수행 시 발생할 수 있는 out-gassing으로 인해 위성체가 본연의 임무 실패라는 결과를 초래할 수 있다 NASA 및 ESA의 Out-gassing에 관한 규정과 TRW에 의한 KOMSAT에 사용된 재료의 진공상태의 Outgassing에 관한 내용에 의하면, 재료의 진공상태와 Out-gassing은 America Society for Testing and Materials에서 제시한 ASTM E959 기준에 따라 제작된다. 일반적으로 우주 환경에서 광학계나 전자부의 원활한 동작을 위해서는 인쇄 회로 기판의 총 질량손실(Total Mass Loss, TML)은 1.00%을 넘지 말아야 하며, 휘발성 응축 질량 (Collected Volatile Condensable Mass, CVCM)은 0.1% 미만이어야 한다. Total Mass Loss(TML) 방법은 대기중에서 측정한 질량과 진공 조건에서 변화되는 질량을 측정함으로써 진공조건에서의 탈기체 특성을 측정하는 방법이다. 본 연구에서는 Solder Resistor(Solder Mask)의 탈기체 측정을 위한 진공챔버의 측정방법 및 진공 형성 과정을 기술하고 실제 과학위성1호에 장착될 시료를 예로 들어 인쇄회로기판에 입힌 Solder Resistor(Solder Mask)가 우주환경인 진공상태에서 위성체 부품의 작동 시 발생할 수 있는 탈기체되는 정도를 질량의 변화분으로 측정하여 위성체가 우주 환경에서 본연의 임무를 안전하게 수행할 있는지를 검증하였다.부분이다.다.향을 해석하고 시뮬레이션 하였다.Device Controller)는 ECU로부터 명령어를 받아서 arm 및 safe 상태에 대한 텔리 메트리 데이터를 제공한다 그리고, SAR(Solar Array Regulator)는 ECU로부터 Bypass Relay 및 ARM Relay에 관한 명령어를 받아 수행되며 그에 따른 텔리 메트리 데이터를 제공한다. 마지막으로 EPS 소프트웨어를 검증하는 EPS Software Verification을 수행하였다 전력계 소프트웨어의 설계의 검증 부분은 현재 설계 제작된 전력계 .소프트웨어의 동작 특성 이 위성 의 전체 운용개념과 연계하여 전력계 소프트웨어가 전력계 및 위성체의 요구조건을 만족시키는지를 확인하는데 있다. 전력계 운용 소프트웨어는 배터리의 충ㆍ방전을 효율적으로 관리해 3년의 임무 기간동안 위성체에 전력을 공급할 수 있도록 설계되어 있다this hot-core has a mass of 10sR1 which i:s about an order of magnitude larger those obtained by previous studies.previous studies.업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을 고려한 GMMAL 작업순서문제를 해결하기 위한 연구가 수행되어야 할 것이다.로 이루어 져야 할 것이다.태를 보다 효율적으로 증진시킬 수 있는 대안이 마련되어져야 한다고 사료된다.$\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응$\lrcorner$과 $\ulcorner$표현$\lrcorner$의 성격과 형태를 외형상으로

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.75-80
• /
• 2009

Bum-in test is one for eliminating semiconductor devices that are subject to early failures and other operational problems; it is usually carried out on the devices by imposing severe test conditions such as elevated voltages, temperatures, and time. In order for such a test to be performed, each burn-in board having devices to be tested, needs to be inserted into a corresponding slot. A set of such slots is called a zone. The slots comprising a zone can only have the burn-in boards with the devices of the same type. In order to test many different types of semiconductor devices, it is desirable to build a burn-in test system to have as many zones as possible. A zone controller controlling a zone, is a device that performs a burn-in test and collects test results. In case of existing systems, each zone controller takes care of a zone that consists of a fixed number of slots. Since a zone controller is, in most cases, embedded into a workstation that controls the overall testing process, adding new zone controllers is restricted by the spaces for them. As a way to solve or alleviate these problems, a dynamic zone system in which the number of slots in a zone can be dynamically allocated, is presented. This system maximizes the efficiency of system utilization, by altering the number of slots and hence minimizing the idle slots of a zone. In addition, all the test operations being performed must be aborted for maintenance in existing systems. In dynamic zone systems, however, a separate and independent maintenance is allowed for each slot, as long as the main power supply system has no problem.

• Journal of Nutrition and Health
• /
• v.45 no.2
• /
• pp.113-120
• /
• 2012

In our previous studies, dietary supplements of silk protein, sericin, and fibroin, were beneficial for improving epidermal levels of ceramides, which are the major lipids for maintaining the epidermal barrier. In this study, we investigated the dietary effects of silk protein on epidermal levels of free sphingoid bases and their phosphates such as $C_{18}$ sphingosine (So), $C_{18}$ sphinganine (Sa), $C_{18}$ sphingosine-1-phosphate (S1P), and $C_{18}$ sphinganine-1-phosphate (Sa1P), which are either synthetic substrate or degradative metabolites of ceramides. Forty-five male NC/Nga mice, an animal model of atopic dermatitis (AD), were divided into three groups: group CA was an atopic control and fed a control diet, group S was fed a 1% sericin diet, and group F was fed a 1% fibroin diet. Fifteen male BALB/c mice served as group C (control group) and were fed the control diet. All mice were fed with diets and water $ad$ $libitum$ for 10 weeks. Sa in group CA was lower than that in group C, but So in group CA was similar to that in group C. So and Sa were higher in groups S and F than those in group CA; So level was even higher than that in group C, and Sa level was similar to that of group C. The So/Sa ratio in group CA, which is reported to increase in AD, was significantly higher than that of group C. The So/Sa ratio was lower in groups S and F than that in group CA, and decreased further in group F. However, S1P and Sa1P in groups S and F were similar to those in group CA. Taken together, we demonstrated that silk protein, sericin and fibroin dietary supplements, increased So and Sa levels, and decreased the So/Sa ratio.