• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.376-380
• /
• 2018

The astaxanthin recovery efficiencies were compared in acetonitrile, acetone, methanol, dichloromethane : methanol (1:3, v/v) and ethylacetate : ethanol (1:1, v/v) as a extraction solvent after the grinding of the H. pluvialis cells. The astaxanthin extraction yield in acetone was 1.13~1.29 times higher than other extraction solvents. It was also found that 96.7% of astaxanthin accumulated in H. pluvialis could be recovered by a single extraction. Since astaxanthin exists mainly as astaxanthin esters in H. pluvialis, a gradient reversed-phase HPLC analysis was carried out for the separation of astaxanthin esters from the extracts of H. pluvialis. Among the astaxanthin inside the H. pluvialis cell, free astaxanthin was 45.9% and astaxanthin esters were the rest.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.3
• /
• pp.223-229
• /
• 2007

여과막 생물반응기를 이용하여 $60^{\circ}C$에서 혐기 세균 복합체가 포도당으로부터 수소를 생산할 수 있는 최적조건을 연구하였다. 여과막 생물반응기는 연속교반 탱크반응기와 외부에 장착된 PVDF (polyvinylidene fluoride) 중공사막 여과장치로 구성되었다. 접종슬러지는 하수처리장 소화 슬러지조에서 얻었고, 포자형성 수소생산 미생물을 얻기 위해 $90^{\circ}C$에서 20분 간 열처리하였다. 16S rRNA PCR-DGGE(polymer chain reaction-denaturing gradient gel electrophoresis) 분석을 통해 열처리 전후의 미생물상 변화를 조사하였다. 열처리 후 DGGE 밴드의 수는 감소하였고, 주요 밴드는 Clostridium perfringens와 유사한 염기서열을 나타내었다. 운전 기간 동안 바이오가스 내 수소함량은 60%(v/v)를 유지하였고, 메탄은 검출되지 않았다. 연속교반 탱크반응기를 여과막 없이 수력학적 체류 4시간에서 운전하였을 때 공급된 포도당의 95.0%가 제거되었고, 이때 균체농도 및 수소생산속도는 각각 1.35 g cell/L 및 7.4 L $H_2$/L/day이었다. 동일한 체류시간에서 PVDF중공사막 여과장치를 장착하여 연속교반 탱크반응기를 운전하였을 때, 균체농도는 1.62 g cel/L로 증가하였고 높은 포도당 제거율(99.5%) 및 수소생산속도(8.8 L $H_2$/L/day)가 관찰되었다. 40 nm 및 100 nm의 공극크기를 가진 여과막은 균체농도 및 수소생산 측면에서 유사한 성능을 나타내었다. 여과막 생물반응기는 여과막의 반복적인 세척을 통해 30일 이상 안정적으로 운전될 수 있었다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2007.11a
• /
• pp.181-186
• /
• 2007

본 논문은 현재 국내 외적으로 널리 공급되고 있는 유리식(glass) 진공관형 태양열 집열기를 대체할 수 있는 비유리식(non-glass) 진공관형 태양열 집열기의 설계 및 제작에 관한 실험적 내용을 소개하고 있다. 비유리식 진공관형 태양열 집열기는 유리식에 비해 그 내구성이 탁월할 뿐 아니라 적용성도 뛰어나지만 비유리식 집열기는 유리식 집열기와 달리 외부공기 입자의 진공관 내부로의 확산을 억제하거나 그 내부의 진공도 유지를 위해 특수 설계를 하여야 하며 아울러 소재의 특성을 최대한 살릴 수 있는 응용 기술의 개발을 필요로 한다. 이를 위하여 진공관 내부의 일정한 진공도 유지를 위해 집열기와 별도로 설치된 Vacuum Chamber를 진공관과 튜브(vacuum connector)로 연결하여 진공관 내의 outgasing이 가능하도록 할 수도 있으며, 진공관 외피에 공기의 침투를 억제하기 위한 gas barrier coating을 고려할 수도 있다. 본 논문에서 소개하는 비유리식(non-glass) 진공관형 태양열 집열기는 기계, 화공, 재료 등 다양한 분야의 원천 기술을 복합적으로 적용한 것으로 기존의 유리식에 비해 설계 및 제작에 있어서 다소 복잡한 양상을 띠고 있다.

• The Journal of Engineering Geology
• /
• v.14 no.4 s.41
• /
• pp.381-390
• /
• 2004

This study was performed to relate the weathering properties of Oyaish tuff from Japan to mechanical properties of rocks in terms of mineralogical alteration and chemistry. The tuff is composed of clinoptilolite, quartz, feldspars, mordenite, opal C-T, and smectite. Since fresh tuff contains approximately $30\~50\%$ zeolite, it is expected that the rock is subjected to weathering process ascribed to water contents on earth surface, significantly reducing mechanical strength of tuff. It is also anticipated that weathering process and properties may be different even in the same rock mass, due to the differences in local mineralogy, chemistry and microtextures in tuff.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.2
• /
• pp.23-33
• /
• 1991

Mn - Zn Ferrite has the natural characteristics of incongruent melting and the zinc oxide evaporation while the crystal is being grown. As a result of these, it comes into existence to be a non-uniform distribution of cations along the crystal growth axis and also Pt particles are usually precipitated into the crystals in Bridgman method since the melt zone is maintained for a long time in the crucible. These have bad effects on the magnetic properties of ferrites. But, to overcome these faults and then acquire the better single crystals. new modified growth method was developed and the growth factors were investigated as following: melt height in the crucible, surface tension and density of melt, the behavior of melt at interface, the shapes of crucible and solid -liquid interface, powder feeding rate, and the crystal growing speed. In additon, when we analyzed the compositional fluctuations of grown crystals, they were supressed within 1.5 mol% $Fe_20_3$, 2 mol% MnO, ZnO respectively with comparing to initial composition of crystal and the microstructures of crystals on the(110) plane were observed by optical microscope through the chemical etching technique and the magnetic properties were determined.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.7
• /
• pp.47-52
• /
• 2009

H.264 video coding standard is widely used due to the high compression rate and quality. The motion compensation is the most time-consuming and complex unit in the H.264 decoder. The performance of the motion compensation is determined by the calculation of pixel interpolation and management of the reference pixels. The reference pixels read from external memory using efficient memory management for data reuse is necessary along with the high performance interpolators. We propose the architecture of a motion compensation unit for H.264 decoders. It is composed of 2-dimensional circular register files, a motion vector predictor and high performance interpolators with low complexity. The 2-dimensional circular register files reuse reference pixel data as much as possible, and feed reference pixel data to interpolators without any latency and complex logic circuits. We design a motion compensation unit and a intra-prediction unit and integrate them into a prediction unit and verify the operation and the performance.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.147-147
• /
• 2011

이상기후 및 극한 홍수 발생빈도의 증가 등으로 인해 많은 수공 구조물이 붕괴 위험에 노출되어 있다. 사전 피해 예방 및 경감을 위해 다양한 수공구조물의 붕괴 현상에 대하여 수리실험적 접근방법을 통한 현상이해 및 예상결과 비교 검증이 필요하다. 그 중에서 제방붕괴에 대한 수리실험은 수치모의를 통한 분석의 어려움 때문에 대부분 모형실험을 통해서 이루어지고 있는 실정이다. 본 연구에서는 실제규모의 제방붕괴 선행실험의 측정결과를 활용하여 실험설계에 이용 하였다. 모형은 실험공간의 규모를 고려하여 축척을 1:10 으로하고, 하도내 흐름 안정을 위해 수로의 길이 는 16, 저폭은 $b\geq10h$를 만족하는 하천으로 설계하여 b를 3m로 설정 하였다. Fr수는 0.29로 원형과 동일하게 하고, 그에 따른 유량 ( )는 0.538m/s로 하였다. 실제 모형 제작에서는 현장 실험실의 펌프용량에 따른 가용유량 ($Q__{max}$)의 제약에 따라 수로가 직선이고 좌우가 대칭인 점을 감안하여 폭을 1/2로 절단 하고 유량은 $0.269m^3/s$(Q/2)를 공급하였다. 위와 같이 모형제작을 위한 실험 설계시 현장 여건을 고려하여 모형을 변형할 경우 EIM(Experimental Information Modeling)을 이용한 수리영향에 대한 분석을 통한 설계검증이 필요하다. FLOW-3D를 이용한 3차원 수치모의를 통하여 동일 지점에서의 유속과 수심을 분석하여 흐름양상을 비교 하였으며, 유속과 수심의 측정위치는 그림 1에 도시하였다. 수치모의 결과 측정지점에서의 수위가 하도 바닥을 기준으로 0.25m로 동일할 경우 수로 단면에 대한 유속 분포가 제방을 기준으로 2b/3까지는 유사한 경향을 보였다. 그 결과, $b\geq10h$인 수로에서 제방붕괴를 위한 모형 설계시 하도 폭을 1/2만 만들 경우에도 실험의 신뢰성이 확보된다는 것을 확인하였다.

• Membrane Journal
• /
• v.18 no.1
• /
• pp.94-102
• /
• 2008

For the treatment of the dye wastewater, a polyamide nano-composite membrane and reverse osmosis (RO) membranes were prepared using interfacial polymerization technique, in which piperazine, meta-phenylene diamine, and trimesoyl chloride were used as monomers, Their permselective properties were characterized with aqueous solutions of PEG 600, $Na_2SO_4$, and NaCl, and their performance was compared with that of Osmonics Co, They were found to be a typical nano-composite membrane and a low pressure RO membrane. Using them, a real dye wastewater supplied from the Kyungin Corporation, one of the domestic dye producer, was treated, studying the separation performances of the membranes, Also, during the wastewater treatment, cleaning in place (CIP) of the membranes was carried out regularly to recover the flux of the membranes. Three different chemical cleaners were employed for the CIP process and their performance were compared in this study.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.3
• /
• pp.133-149
• /
• 1996

The aim of this study is to compare open space planning between Australia and Korea by Local Governments Areas. Open space planning is carried out at the state and municipal level in Australia, but by metropolitan city government in Korea. This study is structured by reviewing the presemt phenomena of provision of open space in Sydney and Seoul, By measuring disparity in terms of open spaces by L. G. A. s an by comparing planning approaches between two cities, for example policy, government standards, government administration system in open space management. In this paper, the provision of parks in Sydney and Seoul are comparatively examined and geographically mapped, and multiple repression analysis is applied to measure the residuals from the line of equality. The results of this study show that, 1) During the last 1 dacade from '80 and '90. Sydney has increased the quantity of open spaces from ratio of 19.11ha/1000 to 22.33ha/1000 of parks, however Seoul decreased it by the ratio of 12.21$m^2$/person to 1012$m^2$ per person. 2) Sydney has more programs, such as Greenspace program, Metropolitan open space program etc. to increase and to distribute open spaces equally rather than Seoul which has less open spaces. 3) There exists patterned inequality in terms of open space provision in inner city and suburb between Sydney and Seoul. 4) Seoul requires more active polices to increase open spaces like Greenacre Program of New Jerrsey State, Double Open Space Pland of Tokyo or Green Space Program of Sydney.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.242-249
• /
• 2010

As the scale of domestic building construction becomes larger, more complicated and more specialized, demands for quality improvement, cost reduction and construction period shortening increase. Construction materials management becomes a main factor to perform the project successfully. Therefore, various researches using RFID(Radio Frequency Identification) are being studied to manage the construction materials efficiently. This research aims to suggest the method of construction materials management using RFID in apartment housing. First, the technical properties of RFID are grasped. Second, problems are extracted by analyzing the case studies and related research using RFID in construction field. Third, construction materials are classified according to the construction process and process of materials management is analyzed. Lastly, method of construction materials management using RFID is suggested. The results of this research are expected to contribute the improvement of construction productivity through effective material management.