• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.282-282
• /
• 2021

강우시 농경지와 축산시설로부터 유출되는 비점오염물질은 하류 수계의 수질과 수생태계에 악영향을 미친다. 이에 따라 환경부에서는 비점오염원관리지역을 지정하고 다양한 비점오염 저감 대책을 시행하고 있다. 본 연구에서는 비점오염원관리지역으로 지정된 안동댐 하류 중 송야천 유역을 대상으로 강우유출수 모니터링을 수행하였으며, 모니터링 결과를 바탕으로 강우시 비점오염물질 유출 특성을 분석하였다. 모니터링 기간은 2020년 6월부터 11월까지 총 5회의 강우사상에 대하여 상·하류와 유입하천을 포함한 총 8개의 모니터링 지점을 대상으로 강우사상별 유량가중평균농도(Event Mean Concentration, EMC), 오염부하, 단위면적당 오염부하를 산정하였으며, 오염원 그룹별 비점배출부하를 산정하여 오염 기여도를 분석하였다. 강우유출수 조사결과를 이용한 EMC 농도 산정 결과 유입하천인 오산천 지점이 SS와 TOC 항목을 제외한 모든 수질항목의 EMC 농도가 가장 큰 것으로 나타났다. 단위면적당 오염부하를 산정하여 비교 분석한 결과 T-P 항목의 단위면적당 오염부하는 물한천 지점(0.69 kg/ha)과 오산천 지점(0.69 kg/ha)이 크게 나타났다. 결과와 같이 오산천 지점과 물한천 지점이 오염정도가 큰 것으로 나타났으며, 이에 따른 상류 오염원 현장 정밀조사를 수행하였다. 조사 결과 강우발생시 상류에 위치한 농경지와 축사에서 발생하는 오염원이 하천으로 유입되고 있었으며, 여러 축사에서 배출되고 있는 유입수를 채취하여 분석한 결과 T-P 농도가 평균 0.935 mg/L로 높게 나타났다. 전국오염원조사자료(국립환경과학원, 2017) 내용을 참조하여 송야천 유역의 오염원 그룹별 비점배출부하를 산정해 오염 기여도를 분석한 결과, T-P 항목의 경우 축산계와 토지계의 비점배출부하가 전체 비점배출부하의 약 63%와 37%를 차지해 비점배출부하 기여도가 큰 것으로 나타났다. 이와 같이 송야천 유역의 경우 강우시 농경지와 축산시설에서 배출되는 오염물질이 하천 수질오염에 상당한 기여를 하고 있는 것으로 보여지며, 비점오염원 발생에 대한 대책 마련이 필요할 것으로 사료된다. 본 연구 결과는 송야천 유역의 비점오염 저감 대책 수립을 위한 기초자료로 활용할 수 있을 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.106-106
• /
• 2019

많은 도심의 하천들은 오염물질의 유입에 취약하다. 최근 신소재 공학 등 첨단산업이 발전하게 되면서 유해화학물질의 유입문제는 더욱 대두되고 있으며, 실제로 최근 유해화학물질 유입사고 발생건수가 늘어나고 있다. 특히 국내 취수량의 90%는 지표수에서 취수하고 있어, 하천오염사고는 직접적인 피해로 이어지게 된다. 따라서 이러한 사고에 대응하기 위하여 수환경에 유입된 유해물질의 거동 매커니즘을 반영한 수질해석이 필요하다. 수체 내에 유입된 유해화학물질은 기본적으로 흐름에 따른 이송 확산을 하며 흡 탈착, 휘발, 침전 부유, 생화학 반응과 같은 다양한 반응과 함께 혼합거동을 한다. 특히 소수성물질의 경우 용해된 상태뿐만 아니라, 유사에 흡착된 상태로 수체에 존재하게 된다. 결국 유해화학물질의 거동을 해석하기 위해서는 유체의 흐름 해석뿐만 아니라 수체에 존재하는 유사의 이송 또한 해석해야한다. 본 연구에서는 흐름해석을 위하여 서울대에서 개발한 흐름모형(HDM-2D)을 사용하였으며, 부유사 거동모의를 위해 부유사거동모형(STM-2D)을 개발하였다. 또한 유해화학물질의 거동모의를 위해 서울대에서 개발한 수질모형(CTM-2D)에 생성/소멸항을 추가하였으며 흐름모형과 부유사모형과의 연계를 통해 유해화학물질의 혼합거동 수치모형을 개발하였다. 각 반응항(흡 탈착, 휘발, 침전 부유, 생화학 반응)을 수치모형에 반영 시에는 보통 두 계(물-토양, 물-공기) 사이의 선형 물질교환으로 이해된다. 따라서 물질의 각 반응 별 평형농도와 물질교환속도계수를 추정식을 통해 산정하여 사용하게 된다. 하지만 각 기작이 반영유무에 따라 계산시간 및 필요입력변수가 늘어나게 되므로, 유해화학물질 유입사고와 같은 빠른 대처가 필요한 경우 각 반응 텀의 유의성을 판단하여 모형에 반영여부를 결정을 통해 경제적인 모의를 할 수 있어야 한다. 이에 따라 본 연구에서는 개발된 모형의 각 매개변수들의 민감도를 분석하고, 흐름조건 및 물질의 특성에 따른 반응항의 유의성을 판단하였다. 본 연구에서는 개발된 모형(부유사거동모형, 유해화학물질의 혼합거동모형)은 해석해 및 현장 데이터와 비교검증을 통해 개발을 완료하였으며, 각 반응항의 민감도 분석을 통해 매개변수의 임계값을 결정하였다.

• Journal of Wetlands Research
• /
• v.7 no.3
• /
• pp.75-85
• /
• 2005

The Construction of industrial complex areas means the increase of imperviousness rate and the increase of nonpoint pollutant emissions during a rainfall. Generally the retention basin can become the alternative for removing and controling these nonpoint pollutants. Recently Ministry of Environment are trying to change the purpose of retention basins from flooding control to nonpoint pollutant control. In order to propel the stormwater management program, administration plan of stormwater management is enacted in Spring, 2005. Hereafter, in a newly developing area, the best management practices should be established to control the nonpoint pollutant. Landuses of the research area are classified to the categories of the 1st manufacturing industry, metal industry, fiber and chemical product manufacturing industry, etc. Therefore, this research was performed to understand washed-off characteristics of stormwater and to suggest the controling method of nonpoint pollutants. The optimum capacity of the retention basin can be determined by analyzing the relationships among data of rainfall, runoff, washed-off pollutants from the areas. The rainfall analysis using the data of normal year, recent 2, 5 and 10 years shows that the 80% rainfall frequency was occurred on 10mm accumulated rainfall, but which is not considered the first flush effect. However, by considering the first flush effect, the appropriate treatment capacity of rainfall can be decreased to 4-5mm accumulated rainfall. Using the criteria, the optimum capacity of retention basin is determined to $12,000m^3$ in the research area. The washed-off nonpoint pollutant loading from the areas have beeb calculated to 435ton/yr for TSS, 238ton/yr for COD, 8,518kg/yr for TKN and 1,816kg/yr for TP. The mass of 78.3ton/yr for TSS, 20.4ton/yr for BOD, 128.6ton/yr for COD, 4.6ton/yr for TKN and 980kg/yr for TP can be reduced by constructing the retention basin. The sediment accumulation rate is also calculated by $6.53kg/m^2-hr$.

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.1
• /
• pp.55-58
• /
• 2000

Methyl tertiary butyl ether (MTBE) is a gasoline additive that boosts the oxygen content in fuel (an oxygenate), resulting in less air-polluting carbon monoxide being released from vehicle exhaust systems. Then, groundwater contamination problems have been developed in areas where the chemical is used. Common sources of water contamination by MTBE include leaking underground gasoline storage tanks and leaks and spills from above ground fuel storage tanks, etc.. Studies on the chemical and these problems are going on abroad vigorously. These studies should be performed in our country as well more actively. This paper reviews on articles on these studies and focuses on the identification of the chemical as a groundwater contamination source.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6610-6617
• /
• 2013

This study examined the current and future Indoor Air Quality (IAQ) control device markets and analyzed the recent studies on indoor air pollutantr emoval to develop a new technology for fine dust control. Currently, the mechanical filter technique occupies the bulk of the IAQ control market but the electronic technique is emerging as an alternative to control fine dust efficiently. Among the gaseous VOCs and fine dust particles contaminating the indoor air quality, fine dust particles are more problematic because they threaten human health by penetrating deep into the body and producing secondary contaminants by chemical reaction with VOCs. The electronic IAQ control device using dielectrophoretic and electrostatic forces is a good option for public spaces where many people pass, and at the same time, it needs to consider temperature, humidity, and the particle properties of specific areas to highlight the control efficiency. Electronic-related technology is expected to be used widely in many public/private spaces wherever a dust-free environment is required.

• Culinary science and hospitality research
• /
• v.22 no.8
• /
• pp.149-156
• /
• 2016

The purpose of this study is to reduce the contaminants (total volatile organic compounds (TVOCs), fine particle, odor and total airborne bacteria) during cooking process in cooking chamber, and to decrease the health damage in indoor space that has bad work environment. In order to solve the shortcomings of existing air purifiers and remove all kinds of pollutants effectively, this study focused on the development of indoor air purifiers which are made of bar type. Bio-ceramics filter which combines activated carbon and loess. The air cleaners developed with 4 measuring items including TVOCs, particulate matter, complex odor and total airborne bacteria were measured comparing their pre-service test to their post-service test after a period of time. The measured results showed higher removal efficiency of 91.02% as the concentration of TVOCs was reduced from $2,500{\mu}g/m^3$ to $223{\mu}g/m^3$. Second, the particulate matter removal ratio was 97.51% efficient with average concentration of $26.68{\mu}g/m^3$. Third, the odor showed 95.20% reduction as air dilution ratio averaged out at 144. Last, total airborne bacteria was eliminated by over 94% showing the changeable concentration from $787{\sim}814CFU/m^3$ to $47{\sim}40CFU/m^3$. In addition, the removal rate of harmful pollutants is excellent, and it is expected that the environment of the existing poor cooking room will be greatly improved by using the developed air purifier in combination with the ventilation device and the stove hood.

• Journal of Korea Port Economic Association
• /
• v.37 no.1
• /
• pp.143-157
• /
• 2021

International organizations such as the World Health Organization, the Organization for Economic Development and Cooperation, and major developed countries recognize the seriousness of air pollution. International organizations such as the International Maritime Organization have also implemented various regulations to reduce air pollution from ships. In line with this international trend, the government has also enacted a special law on improving air quality in port areas, and is making efforts to reduce air pollution caused by ports. The purpose of the Special Act is to implement comprehensive policies to improve air quality in port areas. This study sought to identify the emissions of each source of air pollutants originating from the port and prepare basic data on setting the policy priorities. To this end, the analysis was conducted in six categories: ships, vehicles, loading and unloading equipment, railways, unloading/wild ash dust, road ash dust, and the methodology presented by the European Environment Agency(EEA) and the United States Environmental Protection Agency(EPA). The pollutants subject to analysis were analyzed for carbon monoxide(CO), nitrogen oxides (NOX), sulfur oxides(SOX), total airborne materials(TSP), particulate matter(PM10, PM2.5), and ammonia(NH3). The analysis showed a total of 7,122 tons of emissions. By substance, NOX accounted for the largest portion of 5,084 tons, followed by CO (984 tons), SOX (530 tons), and TSP (335 tons). By source of emissions, ships accounted for the largest portion with 4,107 tons, followed by vehicles with 2,622 tons, showing high emissions. This proved to be the main cause of port air pollution, with 57.6% and 36.8% of total emissions, respectively, suggesting the need for countermeasures against these sources.

• Journal of Food Hygiene and Safety
• /
• v.34 no.3
• /
• pp.251-262
• /
• 2019

In this study, we analyzed Korean dietary habits with food intake data from the Korea National Health and Nutrition Examination Survey (KNHANES) and the Korea Centers for Disease Control and Prevention and we proposed a set of management guidelines for future Korean dietary habits. A total of 839 food items (1,419 foods) were analyzed according to the food catagories in "Food Code", which is the representative food classification system in Korea. The average total daily food intake was 1,585.77 g/day, with raw and processed foods accounting for 858.96 g/day and 726.81 g/day, respectively. Cereal grains contributed to the highest proportion of the food intake. Over 90% of subjects consumed cereal grains (99.09%) and root and tuber vegetables (95.80%) among the top 15 consumed food groups. According to the analysis by item, rice, Korean cabbage kimchi, apple, radish, egg, chili pepper, onion, wheat, soybean curds, potato, cucumber and pork were major (at least 1% of the average daily intake, 158.6 g/day) and frequently (eaten by more than 25% of subjects, 5,168 persons) consumed food items, and Korean spices were at the top of this list. In the case of kimchi, the proportion of intake of Korean cabbage kimchi (64.89 g/day) was the highest. In the case of alcoholic beverages, intake was highest by order of beer (63.53 g/day), soju (39.11 g/day) and makgeolli (19.70 g/day), and intake frequency was high in order of soju (11.3%), beer (7.2%), and sake (6.6%). Analysis results by seasonal intake trends showed that cereal grains have steadily decreased and beverages have slightly risen. In the case of alcoholic beverage consumption frequency, some kinds of makgeolli, wine, sake, and black raspberry wine have decreased gradually year by year. The consumption trend for kimchi has been gradually decreasing as well.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.997-999
• /
• 2008

In this paper, viologen derivative is used as charge transfer material to develop sensors for detecting the organic pollutants which are the main reason of harbor pollution. We fabricated self-assembled monolayers of viologen derivative on gold electrode of QCM and investigated an electrochemical behavior property. We also determined electrochemical sensing property about environmental pollution materials such as bezene, phosphate and surfactant through quantitative and qualitative analysis of charge transfer using intrinsic property of viologen derivative by temperature and concentration change. From the achieved results, we can apply and develope the detecting sensors for harbor pollutants.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.1
• /
• pp.51-60
• /
• 1994

A one-dimensional numerical model has been developed through a Lagragian formulation, which is applicable to advection and diffusion of dissolved matters in storages. The study was conducted to the pollutants released into a canal network in Burnt Store Isles, Punta Gorda, Florida. USA. The hydrodynamic model was developed by using an implicit finite difference scheme. In the computational domain, the network system consists of prismatic channels and storages. The finger canals and small tributaries ale treated as storages in the simplified flow network The numerical results show relatively good agreement with field experiments.