• Magazine of the Korea Concrete Institute
• /
• v.5 no.4
• /
• pp.123-134
• /
• 1993

A rapid progress has been made over last decade in the state-of-the-art earthquake structura1 engineering towards a better understanding of both the earthqauke ground motion and structural response. These efforts seek to ensure that there will be no serious injury or loss of life in the event of earthquake, and that structures can be built at minimum cost. The design of structures in general, concrete structures in particular, to resist strong ground input motions is not a simple matter, and analytical models for such structures must be developed from a design perspective that accounts for the complexities of the structural responses. The primary obj ective of earthquake structural engineering research is to ensure the safety of structures by understanding and improving a design methodology. Ideally, this would require the development of an analytical model related to a design methodology that ensures a ductile performance. For the accurate assessment of the adequacy of analytically developed model, experiments conducted to study the inplane inelastic cyclic behavior of structures should verify the analytical approach. The fundamental goal of this paper is to present and demonstrate experimentally verified analytical methods that provide the adequate degree of safety and confidience in the behavior of reinforced concrete structural components. This study further attempts to extend the developed modeling techruque for use by practicing structural engineers for both the analysis and design.Plication of the relaxed diaphragm through left thoracotomy was done and result was excellent as seen on Fig. 5. Cause of eventration of the left hemidiaphragm was due to paralysis of the left phrenic nerve which was tested during thoracotomy.

• Journal of The Korean Association For Science Education
• /
• v.36 no.3
• /
• pp.389-397
• /
• 2016

This study aims to test the efficacy of English-based automated computer scoring models and machine translation to score Korean college students' written responses on natural selection concept items. To this end, I collected 128 pre-service biology teachers' written responses on four-item instrument (total 512 written responses). The machine translation software (i.e., Google Translate) translated both original responses and spell-corrected responses. The presence/absence of five scientific ideas and three $na{\ddot{i}}ve$ ideas in both translated responses were judged by the automated computer scoring models (i.e., EvoGrader). The computer-scored results (4096 predictions) were compared with expert-scored results. The results illustrated that no significant differences in both average scores and statistical results using average scores was found between the computer-scored result and experts-scored result. The Pearson correlation coefficients of composite scores for each student between computer scoring and experts scoring were 0.848 for scientific ideas and 0.776 for $na{\ddot{i}}ve$ ideas. The inter-rater reliability indices (Cohen kappa) between computer scoring and experts scoring for linguistically simple concepts (e.g., variation, competition, and limited resources) were over 0.8. These findings reveal that the English-based automated computer scoring models and machine translation can be a promising method in scoring Korean college students' written responses on natural selection concept items.

• Journal of Korean Society of Forest Science
• /
• v.94 no.6
• /
• pp.431-440
• /
• 2005

Location, height and clear-length of individual tree can be measured directly by LiDAR Remote Sensing, and dbh(diameter at breast height) can be estimated indirectly by tree height measured by LiDAR. In addition, stand volume and stand biomass are computed from estimated growth factors. In this study, each estimated growth factor was compared to the field measurements to validate accuracy. The coefficient of determination of total tree heights was 0.66 for total trees, 0.68 for Pinus koraiensis, 0.66 for Larix leptolepis and 0.60 for Quercus spp. The coefficient of determination of clear-length was 0.79 for total trees, 0.73 for Pinus koraiensis, 0.79 for Larix leptolepis, 0.68 for Quercus spp. The coefficient of determination of dbh predicted was 0.73 for Pinus koraiensis, 0.73 for Larix leptolepis and 0.85 for Quercus spp. Moreover The coefficient of determination of basal area was 0.82 for Pinus koraiensis, 0.92 for Larix leptolepis and 0.95 for Quercus spp. Biomass per ha computed by growth factor using LiDAR was 40,306 dm/ha for Pinus koraiensis, 94,150 tdm/ha for Larix leptolepis and 94,481 tdm/ha for Quercus spp. by species.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.4
• /
• pp.788-799
• /
• 1996

The purpose of this study was to determine the accuracy of the prediction methods which are frequently used in the clinic, such as Moyers', Tanaka and Johnston's, Song's Hixon and Oldfather's, Kaplan's, Smith's. These prediction methods were compared to the data, which were obtained from 100 Kyung-Hee University students (50 males and 50 females) with normal occlusion of permanent dentition, using a retrospective statistical analysis. The standard periapical radiopgraphs for the lower premolars using 16-inch long cone technique and the yellow stone dental casts were taken from each samples. The mesiodistal widths of 4 incisors, canine, premolars were measured on the dental casts, and those of premolars were measured on the radiographs. The correlation coefficients, paired samples t-tests, regression coefficients between the actual measuredments of the samples and the predicted measurements of each methods were analyzed. The results obtained were as follows: 1. The prediction methods using periapical radiographs tended to show a stronger correlation than the methods using dental casts; the correlation coefficients between the actual widths of the lower canine and premolars and the predicted widths of the tested methods were higher in Smith, Kaplan, Hixon & Oldfater, and Tanaka & Johnston (p<0.001). 2. The Moyers' probability chart at 65 % showed a tendency toward the least difference between the actual measurements and the predicted widths of the lower canine and the premolars, and the methods of Smith, Kaplan, Tanaka & Johnston also showed a less difference. 3. By means of evaluation in correlation coefficients and paired smaples t-tests, the Smith and Tanaka & Johnston in male, and the Moyers' 65 % and Song in female showed a high tendency toward accurate methods. 4. The regression equations by models that are derived from the study were as follows: Male(Lt.) :Y=10.799+0.475X Femle(Lt.) :Y= 7.427+0.609X (Rt.) :Y=11.043+0.462X (Rt.) :Y= 8.475+0.556X 5. The regression equations by radiographs that are dericed from the study were as follows: Male(Lt.) :Y=6.5651+0.9720X Femle(Lt.) :Y=4.8656+1.0632X (Rt.) :Y=7.8610+0.9060X (Rt.) :Y=4.5483+1.0843X

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.10
• /
• pp.109-119
• /
• 2013

An unmanned ground vehicle(UGV) today plays a significant role in both civilian and military areas. Predominantly these systems are used to replace humans in hazardous situations. To take unmanned ground vehicles systems to the next level and increase their capabilities and the range of missions they are able to perform in the combat field, new technologies are needed in the area of command and control. For this reason, we present war field simulator based on information fusion technology to efficiently control UGV. In this paper, we present the war field simulator which is made of critical components, that is, simulation controller, virtual image viewer, and remote control device to efficiently control UGV in the future combat fields. In our information fusion technology, improved methods of target detection, recognition, and location are proposed. In addition, time reduction method of target detection is also proposed. In the consequence of the operation test, we expect that our war field simulator based on information fusion technology plays an important role in the future military operation significantly.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.1
• /
• pp.5-13
• /
• 2003

The purpose of this study is to determine the value of serum concentration of C-reactive protein(CRP) in comparison with ESR and leukocyte as the tools for diagnosis and follow-up study of infection. For this study, thirty-one patients with head and neck infection and thirty-two patients performed the orthognathic surgery were selected for experimental and control groups each other. we analyzed the blood sample daily to measure CRP, ESR and leukocytosis. The results of this study are as the following : 1. Serum C-Reactive Protein levels in the experimental group were higher than control group and the pattern of CRP changes continued to decline in both groups(P<0.001). 2. ESR changes in both groups were scattered without any special pattern. 3. Correlation between CRP and Leukocyte was higher than others(r=0.664, P<0.01). 4. In the Receiver Operating Characteristic(ROC) Curve of experimental group, rapid increase of CRP curve and Area under the curve(AUC) value, 0.774, indicate the high accuracy of estimation. 5. In experimental group, sensitivity of CRP, ESR, and Leukocytosis on recovery day were 83%, 17% and 71%. Based on the results of this study, we could conclude that determination of CRP is more useful method to diagnosis and follow-up study of infection than other commonly used variables in oral and maxillofacial region.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.233-245
• /
• 2011

With the use of computed tomography (CT), computer-aided design/computer-assisted machining (CAD/CAM) technology and internet, the implant dentistry has been evolved. The surgical templates made by CAD/CAM technology and precise installation of implants, permit restorations to be inserted immediately after implants have been placed. The advantages of CAD/CAM guided implant procedures are flapless, minimally invasive surgery and shorter surgery time. With this technique, less postoperative morbidity and delivery of prosthesis for immediate function would be possible. A patient with an edentulous maxilla and mandible received 7 implants in mandible using CAD/CAM surgical templates. Prefabricated provisional fixed prostheses were connected immediately after implant installation. Provisional prostheses were evaluated for aesthetics and function during 6 months. Definitive prostheses were fabricated. At 6 months recall appointment, patient's occlusion was slightly changed. To prevent additional adverse effect, regular check-up and occlusal adjustment would be needed.

• The Journal of Society for e-Business Studies
• /
• v.19 no.4
• /
• pp.73-99
• /
• 2014

Recently, big data have been studied ways to use in various fields. Big data refers to huge amounts of data that could not be addressed by conventional methods. Big data has attracted attention for improving accuracy of decision-making, forecasting in the near future, and creation of new business. In this study, it is an object to develop the utilization plan for big data in the field of technology commercialization. For this reason, we conducted study like case studies, literature review and focus group interview. We have derived the big data utilization plan based on this in the technology commercialization field. It, the data utilization plan, combines with the technology commercialization process of Jolly and it has five sub processes (Imagining, Incubating, Demonstrating, Promoting, Sustaining). In this paper, there is a significance that has emphasized the possibility for big data utilization in the technology commercialization. However, there is a limit to the general interpretation for our study. And we hope to contribute to the expansion of areas of technology commercialization information analysis through this research.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.197-207
• /
• 2010

Using a variety of data-mining methods on high-throughput cDNA microarray data, the level of gene expression in two different tissues can be compared, and DEG(Differentially Expressed Gene) genes in between normal cell and tumor cell can be detected. Diagnosis can be made with these genes, and also treatment strategy can be determined according to the cancer stages. Existing cancer classification methods using machine learning select the marker genes which are differential expressed in normal and tumor samples, and build a classifier using those marker genes. However, in addition to the differences in gene expression levels, the difference in gene-gene correlations between two conditions could be a good marker in disease diagnosis. In this study, we identify gene pairs with a big correlation difference in two sets of samples, build gene classification modules using these gene pairs. This cancer classification method using gene modules achieves higher accuracy than current methods. The implementing clinical kit can be considered since the number of genes in classification module is small. For future study, Authors plan to identify novel cancer-related genes with functionality analysis on the genes in a classification module through GO(Gene Ontology) enrichment validation, and to extend the classification module into gene regulatory networks.

• Journal of Korea Water Resources Association
• /
• v.47 no.11
• /
• pp.1051-1060
• /
• 2014

This study is attempted to realize an improved computation performance by combining the MPI (Message Passing Interface) Technique, a standard model of the parallel programming in the distributed memory environment, with the DHM(Diffusion Hydrodynamic Model), a inundation analysis model. With parallelizing inundation model, it compared with the existing calculation method about the results of applications to complicate and required long computing time problems. In addition, it attempted to prove the capability to estimate inundation extent, depth and speed-up computing time due to the flooding in protected lowlands and to validate the applicability of the parallel model to the actual flooding analysis by simulating based on various inundation scenarios. To verify the model developed in this study, it was applied to a hypothetical two-dimensional protected land and a real flooding case, and then actually verified the applicability of this model. As a result of this application, this model shows that the improvement effectiveness of calculation time is better up to the maximum of about 41% to 48% in using multi cores than a single core based on the same accuracy. The flood analysis model using the parallel technique in this study can be used for calculating flooding water depth, flooding areas, propagation speed of flooding waves, etc. with a shorter runtime with applying multi cores, and is expected to be actually used for promptly predicting real time flood forecasting and for drawing flood risk maps etc.