• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.123-124
• /
• 2009

염화물이 전기아연도금에 미치는 영향을 분석해본 결과 염화물의 양이 부족한 경우에는 도금이 원활하지 않았지만 교반속도를 충분히 주면 도금이 가능하였고, 염화칼륨의 양에 따라서 우선성장하는 면이 달랐으며 가격이 비싼 염화칼륨을 염화나트륨으로 대체 가능성이 확인되었다.

• Journal of Sericultural and Entomological Science
• /
• v.44 no.2
• /
• pp.87-92
• /
• 2002

Dissolution of Antheraea pernyi silk fiber was carried out in a zinc chloride solution with various dissolving conditions. The solubility was significantly dependent on the concentration of zinc chloride, dissolving temperature and time. The proper conditions of dissolution were found as 8 M zinc chloride, 70$^{\circ}C$ temperature and 30 min dissolving time. Regenerated A. pernyi silk fibroin powder was obtained through dialysis. FTIR and XRD showed that regenerated A. pernyi silk powder was composed of a ${\beta}$-sheet as well as an ${\alpha}$-helix conformation.

• Clean Technology
• /
• v.19 no.3
• /
• pp.249-256
• /
• 2013

The experiments have been performed to obtain zinc complex compound with smaller particle sizes, which is used as a charge control agent in manufacturing toner. Metallic salts and polyhydric alcohols have been studied to investigate their effects on the formation and the triboelectric charge of zinc complex-compound particle with different sizes. Reactants such as zinc chloride and 3,5-di-tert.-butyl salicylic acid have been used to form the complex compound. Polyethylene glycol (PEG-300), glycerin and ethylene glycol have been added into the zinc chloride solution beforehand to lower the reaction rate in the formation of zinc complex-compound. Aluminium(III) chloride has been mixed in the zinc chloride solution beforehand to restrain the particle size from growing. When PEG-300 and aluminium(III) chloride are used to lower the reaction rate and to restrain the particle size from growing, the average particle size of zinc complex compound decreases from $5.28{\mu}m$ to $2.33{\mu}m$, which was 44.1% of $5.28{\mu}m$.

• Journal of Oral Medicine and Pain
• /
• v.36 no.4
• /
• pp.245-252
• /
• 2011

The aim of this study is to clinically evaluate the effect of a mouthwash containing cetylpyridinium and zinc chloride on reduction of morning oral malodor in healthy subjects measured by organoleptic measurement and a portable sulfide monitor. A total of 8 healthy non-smoking male volunteers were enrolled in this study of crossover design consisting of two experimental phases. The subjects were instructed to rinse the mouth with 10 mL of the experimental mouthwash containing cetylpyridinium and zinc chloride for 30 seconds at the first phase. At the second phase after a one-week washout period, each subject rinsed with distilled water as a control. All experiments were conducted at around 8:30 a.m. and oral malodor was measured using organoleptic measurement and a portable sulfide monitor just before rinsing with the experimental mouthwash or control (baseline), 1 hr, 2 hrs, and 3 hrs after rinsing. The mouthwash containing cetylpyridinium and zinc chloride reduced morning oral malodor up to 3 hrs after rinsing. Organoleptic score and concentrations of volatile sulfur compounds after use of the experimental mouthwash significantly decreased with time, and the decreases were significantly different between the mouthwash and control. In conclusion, the mouthwash containing cetylpyridinium and zinc chloride is significantly effective on reduction of morning oral malodor in healthy subjects by 3 hrs.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.8-13
• /
• 2012

The experiments have been performed to obtain zinc complex compound with smaller particle size, which is used as a charge control agent in manufacturing toner. Metallic salts and polyhydric alcohols have been studied to investigate their effects on the formation of different sizes of zinc complex-compound particle. Reactants such as zinc chloride and 3,5-di-tert-butyl salicylic acid have been used to form the complex compound. Polyethylene glycol (PEG-300), glycerin and ethylene glycol have been added into the zinc chloride solution beforehand to lower the reaction rate in the formation of zinc complex-compound. Zirconium (IV) oxychloride octahydrate has been mixed in the zinc chloride solution beforehand to restrain crystals from growing. When PEG-300 and zirconium (IV) oxychloride octahydrate are used to lower the reaction rate and to restrain the particle size from growing, the average particle size of zinc complex compound decreases from 5.28 to 1.84 ${\mu}m$, which is 34.9% of 5.28 ${\mu}m$.

• Journal of Forest and Environmental Science
• /
• v.23 no.1
• /
• pp.51-55
• /
• 2007

The effect of ratio between chemical activating agent and raw material in the preparation of activated carbons from wood has been studied. Pinus koraiensis wood and zinc chloride ($ZnCl_2$) were used for materials in this study. Mixtures of wood and zinc chloride were heated under nitrogen flow in the temperature ranging from room-temperature to $600^{\circ}C$ for 1 hr using thermogravimetric technique. During heat treatment, activated carbons with various pore size and specific surface properties were obtained. The maximum BET surface area and total pore volume were $1468m^2/g$ and 1.74 cc/g, respectively, at the mixture ratio of 1 (wood powder) to 5 ($ZnCl_2$). It can be concluded that the differences in the properties of the activated carbons were related significantly with the ratio of chemical activating regent.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.3
• /
• pp.21-26
• /
• 2008

Nitrate adsorption from aqueous solutions onto zinc chloride ($ZnCl_2$) treated coconut Granular Activated Carbon (GAC) was studied in a batch mode at two different initial nitrate concentrations (25 and 50 mg/L). The rate of nitrate uptake on prepared media was fast in the beginning, and 50% of adsorption was occurred within 10 min. The adsorption equilibrium was achieved within one hour. The mechanism of adsorption of nitrate on $ZnCl_2$ treated coconut GAC was investigated using four simplified kinetic models : the rate parameters were calculated for each model. The kinetic analysis indicated that pseudo-second-order kinetic with pore-diffusion-controlled was the best correlation of the experimental kinetic data in the present adsorption study.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.370-374
• /
• 2013

The effects of zinc chloride addition on pore development of porous carbon nanofibers prepared by polyacrylonitrile (PAN)/ N,N'-dimethylformamide (DMF) (10 wt%) electrospinning were investigated. The change of morphological and structural modification by zinc chloride activation was investigated by a scanning electron microscopy (SEM) analysis. $N_2$ adsorption isotherm characteristics at 77 K were confirmed by Brunauer-Emmett-Teller (BET) and Horvath-Kawazoe (H-K) equations, and the curves showed the Type I mode in the International Union of Pore and Applied Chemistry (IUPAC) classification, indicating that lots of micropores exist in the sample. In addition, specific surface areas and total pore volumes of porous carbons prepared by the zinc chloride activation were determined as 600~980 $m^2/g$ and 0.24~0.40 $cm^3/g$, respectively. As experimental results, many holes or demolished structures were found on the fiber surfaces after the zinc chloride activation as confirmed by a SEM analysis. It was also observed that various pore sizes were found to be depended on the adding content of zinc chloride in PAN/DMF solution in this system.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.1
• /
• pp.15-21
• /
• 2023

To prepare zinc oxide powder, three types of sodium-based alkali precipitants such as NaOH, Na₂CO₃, NaOH/NaHCO₃ were compared to the differences in the manufacturing process of zinc oxide powder from zinc precipitate products like intermediates with the consideration of thermodynamic reaction. The prepared zinc precipitate products by the reaction with the sodium-based alkali precipitant were confirmed to respectively hydroxy zinc chloride (Zn₅(OH)₈Cl₂·H₂O) and zinc carbonate hydroxide (Zn₅(OH)₆(CO₃)₂·H₂O) from XRD analysis. Zinc oxide particles were compared in heat treatment at 800℃ according to sodium-based alkali precipitants. The mixed NaOH and NaHCO₃ of alkali precipitant reaction was contributed to synthesize the more uniform zinc oxide particles.

• Journal of the Korean institute of surface engineering
• /
• v.26 no.3
• /
• pp.135-142
• /
• 1993

탄소강 및 Nickel 음극에서 아연의 전착특성에 대하여 조사하였다. 황산아연 및 염화아연용액속에서 회전전극을 사용하여 실험한 결과 아연의 평형전위 이전에서 전착이 일어나는 소위 Underpotential Deposition 현상이 관찰되었다. 또한 이렇게 전착이 일어난 아연층은 평형상태에서 일정한 두께로 제한되는데 전착전압에 따른 전착층의 전하량을 계산한 결과 다층흡착구조과 유사한 경향을 나타내었다.